Because our 200-301 Ppt exam torrent can simulate limited-timed examination and online error correcting, it just takes less time and energy for you to prepare the 200-301 Ppt exam than other study materials. As is known to us, maybe you are a worker who is busy in your career. Therefore, purchasing the 200-301 Ppt guide torrent is the best and wisest choice for you to prepare your test. Our expert team will check the update 200-301 Ppt learning prep and will send the update version automatically to the clients. So the clients can enjoy the convenience of our wonderful service and the benefits brought by our superior 200-301 Ppt guide materials. Besides, there is no difficult sophistication about the procedures, our latest 200-301 Ppt exam torrent materials have been in preference to other practice materials and can be obtained immediately.
CCNA 200-301 Why not have a try?
In order to help all customers gain the newest information about the 200-301 - Cisco Certified Network Associate Exam Ppt exam, the experts and professors from our company designed the best Cisco Certified Network Associate Exam test guide. With our Reliable Dumps For 200-301 exam questions, you will easily get the favor of executives and successfully enter the gates of famous companies. You will have higher wages and a better development platform.
Our 200-301 Ppt study guide design three different versions for all customers. These three different versions include PDF version, software version and online version, they can help customers solve any problems in use, meet all their needs. Although the three major versions of our 200-301 Ppt exam dumps provide a demo of the same content for all customers, they will meet different unique requirements from a variety of users based on specific functionality.
Cisco 200-301 Ppt - Now they have a better life.
If we waste a little bit of time, we will miss a lot of opportunities. If we miss the opportunity, we will accomplish nothing. Then, life becomes meaningless. Our 200-301 Ppt preparation exam have taken this into account, so in order to save our customer’s precious time, the experts in our company did everything they could to prepare our 200-301 Ppt study materials for those who need to improve themselves quickly in a short time to pass the exam to get the 200-301 Ppt certification.
Next, I will detail the relevant information of our learning materials so that you can have a better understanding of our 200-301 Ppt guide training. Our 200-301 Ppt study tool prepared by our company has now been selected as the secret weapons of customers who wish to pass the exam and obtain relevant certification.
200-301 PDF DEMO:
QUESTION NO: 1
Which two tasks must be performed to configure NTP to a trusted server in client mode on a single network device? (Choose two)
A. Verify the time zone.
B. Disable NTP broadcasts
C. Set the NTP server private key
D. Specify the IP address of the NTP server
E. Enable NTP authentication.
Answer: D,E
Explanation:
To configure authentication, perform this task in privileged mode:
Step 1: Configure an authentication key pair for NTP and specify whether the key will be trusted or untrusted.
Step 2: Set the IP address of the NTP server and the public key.
Step 3: Enable NTP client mode.
Step 4: Enable NTP authentication.
Step 5: Verify the NTP configuration.
Reference: https://www.cisco.com/c/en/us/td/docs/switches/lan/catalyst4000/8-
2glx/configuration/guide/ ntp.html
QUESTION NO: 2
Drag and Drop Question
Drag and drop the WLAN components from the left onto the correct descriptions on the right.
Answer:
Explanation:
The service port can be used management purposes, primarily for out-of-band management.
However, AP management traffic is not possible across the service port. In most cases, the service port is used as a "last resort" means of accessing the controller GUI for management purposes. For example, in the case where the system distribution ports on the controller are down or their communication to the wired network is otherwise degraded.
A dynamic interface with the Dynamic AP Management option enabled is used as the tunnel source for packets from the controller to the access point and as the destination for CAPWAP packets from the access point to the controller.
The virtual interface is used to support mobility management, Dynamic Host Configuration Protocol
(DHCP) relay, and embedded Layer 3 security such as guest web authentication. It also maintains the
DNS gateway host name used by Layer 3 security and mobility managers to verify the source of certificates when Layer 3 web authorization is enabled.
Reference: https://www.cisco.com/c/en/us/td/docs/wireless/controller/8-5/config- guide/b_cg85/ports_and_interfaces.html
QUESTION NO: 3
Refer to the exhibit. After you apply the given configuration to arouter, the DHCP clients behind the device connot communicate with hosts outside of their subnet.
Which action is most likely to correct the problem?
A. configure the default gateway
B. Configure the dns server on the same subnet as the clients
C. Activate the dhcp pool
D. Correct the subnet mask
Answer: A
QUESTION NO: 4
Which statement about Link Aggregation when implemented on a Cisco Wireless LAN
Controller is true?
A. One functional physical port is needed to pass client traffic
B. The EtherChannel must be configured in "mode active"
C. When enabled the WLC bandwidth drops to 500 Mbps
D. To pass client traffic two or more ports must be configured.
Answer: A
Explanation:
Link aggregation (LAG) is a partial implementation of the 802.3ad port aggregation standard. It bundles all of the controller's distribution system ports into a single 802.3ad port channel.
Restriction for Link aggregation:
- LAG requires the EtherChannel to be configured for `mode on' on both the controller and the
Catalyst switch -> Answer B is not correct.
- If the recommended load-balancing method cannot be configured on the Catalyst switch, then configure the LAG connection as a single member link or disable LAG on the controller -> Answer A is not correct while answer D is correct.
Reference: https://www.cisco.com/c/en/us/td/docs/wireless/controller/7-5/configuration- guide/b_cg75/ b_cg75_chapter_0100010.html
QUESTION NO: 5
Refer to the exhibit. C-router is to be used as a "router-on-a-stick" to route between the
VLANs.
All the interfaces have been properly configured and IP routing is operational. The hosts in the VLANs have been configured with the appropriate default gateway.
What is true about this configuration?
A. These commands need to be added to the configuration:
C-router(config)# router rip
C-router(config-router)# network 172.19.0.0
B. These commands need to be added to the configuration:
C-router(config)# router ospf 1
C-router(config-router)# network 172.19.0.0 0.0.3.255 area 0
C. These commands need to be added to the configuration:
C-router(config)# router eigrp 123
C-router(config-router)# network 172.19.0.0
D. No further routing configuration is required.
Answer: D
Explanation:
Since all the same router (C-router) is the default gateway for all three VLANs, all traffic destined to a different VLAN will be sent to the C-router. The C-router will have knowledge of all three networks since they will appear as directly connected in the routing table. Since the C-router already knows how to get to all three networks, no routing protocols need to be configured.
IIA IIA-CIA-Part2-KR - The clients can use the shortest time to prepare the exam and the learning only costs 20-30 hours. The staff of HP HPE0-S59 study materials is online 24 hours a day, seven days a week. Once their classmates or colleagues need to prepare an exam, they will soon introduce them to choose our SAP C_S4CFI_2402 study materials. CompTIA PT0-002 - We are reliable and trustable in this career for more than ten years. HP HPE7-A02 - In the end, you will become an excellent talent.
Updated: May 28, 2022