Omgzlook's products are developed by a lot of experienced IT specialists using their wealth of knowledge and experience to do research for IT certification exams. So if you participate in Cisco certification 200-301 Pass4Sure exam, please choose our Omgzlook's products, Omgzlook can not only provide you a wide coverage and good quality exam information to guarantee you to let you be ready to face this very professional exam but also help you pass Cisco certification 200-301 Pass4Sure exam to get the certification. All those merits prefigure good needs you may encounter in the near future. Our 200-301 Pass4Sure training dumps are highly salable not for profit in our perspective solely, they are helpful tools helping more than 98 percent of exam candidates get the desirable outcomes successfully. Omgzlook is a good website for Cisco certification 200-301 Pass4Sure exams to provide short-term effective training.
CCNA 200-301 This is really amazing.
CCNA 200-301 Pass4Sure - Cisco Certified Network Associate Exam And we will let you down. From the view of specialized examination point, it is necessary to teach you tips about the exam. You need to outsmart, and do not give your future the chance of failure.
The learning of our 200-301 Pass4Sure study materials costs you little time and energy and we update them frequently. We can claim that you will be ready to write your exam after studying with our 200-301 Pass4Sure exam guide for 20 to 30 hours. To understand our 200-301 Pass4Sure learning questions in detail, just come and try!
Cisco 200-301 Pass4Sure - We should use the strength to prove ourselves.
Many people want to be the competent people which can excel in the job in some area and be skillful in applying the knowledge to the practical working in some industry. But the thing is not so easy for them they need many efforts to achieve their goals. Passing the test 200-301 Pass4Sure certification can make them become that kind of people and if you are one of them buying our 200-301 Pass4Sure study materials will help you pass the 200-301 Pass4Sure test smoothly with few efforts needed.
Don't you believe in it? Omgzlook real questions and answers are the materials that it can help you get high marks and pass the certification exam. Please try it.
200-301 PDF DEMO:
QUESTION NO: 1
Which statement about Link Aggregation when implemented on a Cisco Wireless LAN
Controller is true?
A. One functional physical port is needed to pass client traffic
B. The EtherChannel must be configured in "mode active"
C. When enabled the WLC bandwidth drops to 500 Mbps
D. To pass client traffic two or more ports must be configured.
Answer: A
Explanation:
Link aggregation (LAG) is a partial implementation of the 802.3ad port aggregation standard. It bundles all of the controller's distribution system ports into a single 802.3ad port channel.
Restriction for Link aggregation:
- LAG requires the EtherChannel to be configured for `mode on' on both the controller and the
Catalyst switch -> Answer B is not correct.
- If the recommended load-balancing method cannot be configured on the Catalyst switch, then configure the LAG connection as a single member link or disable LAG on the controller -> Answer A is not correct while answer D is correct.
Reference: https://www.cisco.com/c/en/us/td/docs/wireless/controller/7-5/configuration- guide/b_cg75/ b_cg75_chapter_0100010.html
QUESTION NO: 2
Drag and Drop Question
Drag and drop the WLAN components from the left onto the correct descriptions on the right.
Answer:
Explanation:
The service port can be used management purposes, primarily for out-of-band management.
However, AP management traffic is not possible across the service port. In most cases, the service port is used as a "last resort" means of accessing the controller GUI for management purposes. For example, in the case where the system distribution ports on the controller are down or their communication to the wired network is otherwise degraded.
A dynamic interface with the Dynamic AP Management option enabled is used as the tunnel source for packets from the controller to the access point and as the destination for CAPWAP packets from the access point to the controller.
The virtual interface is used to support mobility management, Dynamic Host Configuration Protocol
(DHCP) relay, and embedded Layer 3 security such as guest web authentication. It also maintains the
DNS gateway host name used by Layer 3 security and mobility managers to verify the source of certificates when Layer 3 web authorization is enabled.
Reference: https://www.cisco.com/c/en/us/td/docs/wireless/controller/8-5/config- guide/b_cg85/ports_and_interfaces.html
QUESTION NO: 3
Refer to the exhibit. C-router is to be used as a "router-on-a-stick" to route between the
VLANs.
All the interfaces have been properly configured and IP routing is operational. The hosts in the VLANs have been configured with the appropriate default gateway.
What is true about this configuration?
A. These commands need to be added to the configuration:
C-router(config)# router rip
C-router(config-router)# network 172.19.0.0
B. These commands need to be added to the configuration:
C-router(config)# router ospf 1
C-router(config-router)# network 172.19.0.0 0.0.3.255 area 0
C. These commands need to be added to the configuration:
C-router(config)# router eigrp 123
C-router(config-router)# network 172.19.0.0
D. No further routing configuration is required.
Answer: D
Explanation:
Since all the same router (C-router) is the default gateway for all three VLANs, all traffic destined to a different VLAN will be sent to the C-router. The C-router will have knowledge of all three networks since they will appear as directly connected in the routing table. Since the C-router already knows how to get to all three networks, no routing protocols need to be configured.
QUESTION NO: 4
Which two tasks must be performed to configure NTP to a trusted server in client mode on a single network device? (Choose two)
A. Verify the time zone.
B. Disable NTP broadcasts
C. Set the NTP server private key
D. Specify the IP address of the NTP server
E. Enable NTP authentication.
Answer: D,E
Explanation:
To configure authentication, perform this task in privileged mode:
Step 1: Configure an authentication key pair for NTP and specify whether the key will be trusted or untrusted.
Step 2: Set the IP address of the NTP server and the public key.
Step 3: Enable NTP client mode.
Step 4: Enable NTP authentication.
Step 5: Verify the NTP configuration.
Reference: https://www.cisco.com/c/en/us/td/docs/switches/lan/catalyst4000/8-
2glx/configuration/guide/ ntp.html
QUESTION NO: 5
A router running EIGRP has learned the same route from two different paths. Which parameter does the router use to select the best path?
A. administrative distance
B. as-path
C. metric
D. cost
Answer: C
Explanation:
If a router learns two different paths for the same network from the same routing protocol, it has to decide which route is better and will be placed in the routing table. Metric is the measure used to decide which route is better (lower number is better). Each routing protocol uses its own metric.
For example, RIP uses hop counts as a metric, while OSPF uses cost.
https://study-ccna.com/administrative-distance-metric/
Saving the precious time users already so, also makes the Salesforce Marketing-Cloud-Email-Specialist quiz torrent look more rich, powerful strengthened the practicability of the products, to meet the needs of more users, to make the Salesforce Marketing-Cloud-Email-Specialist test prep stand out in many similar products. SAP C_SIGPM_2403 - Or you can choose to free update your exam dumps. SAP C-IEE2E-2404 - Being considered the most authentic brand in this career, our professional experts are making unremitting efforts to provide our customers the latest and valid {CertName} exam simulation. Besides, to make you be rest assured of our dumps, we provide Fortinet FCP_FCT_AD-7.2 exam demo for you to free download. But we can help all of these candidates on ISQI CT-AI_v1.0_World study questions.
Updated: May 28, 2022