Time does not wait! If you are very busy, you can only take two or three hours a day to study our 200-301 Objectives study engine. Then I tell you this is enough! And we are the leading practice materials in this dynamic market. To facilitate your review process, all questions and answers of our 200-301 Objectives test question is closely related with the real exam by our experts who constantly keep the updating of products to ensure the accuracy of questions, so all 200-301 Objectives guide question is 100 percent assured. On one hand, our 200-301 Objectives study materials are all the latest and valid exam questions and answers that will bring you the pass guarantee.
CCNA 200-301 We have always advocated customer first.
CCNA 200-301 Objectives - Cisco Certified Network Associate Exam Our ability of improvement is stronger than others. As you know, we are now facing very great competitive pressure. We need to have more strength to get what we want, and Latest Test 200-301 Questions Pdf exam dumps may give you these things.
In order to save you a lot of installation troubles, we have carried out the online engine of the 200-301 Objectives latest exam guide which does not need to download and install. This kind of learning method is convenient and suitable for quick pace of life. But you must have a browser on your device.
Cisco 200-301 Objectives - Please remember you are the best.
Annual test syllabus is essential to predicate the real 200-301 Objectives questions. So you must have a whole understanding of the test syllabus. After all, you do not know the 200-301 Objectives exam clearly. It must be difficult for you to prepare the 200-301 Objectives exam. Then our study materials can give you some guidance. All questions on our 200-301 Objectives study materials are strictly in accordance with the knowledge points on newest test syllabus. Also, our experts are capable of predicating the difficult knowledge parts of the 200-301 Objectives exam according to the test syllabus. We have tried our best to simply the difficult questions. In order to help you memorize the 200-301 Objectives study materials better, we have detailed explanations of the difficult questions such as illustration, charts and referring website. Every year some knowledge is reoccurring over and over. You must ensure that you master them completely.
And our 200-301 Objectives practice engine will be your best friend to help you succeed. Now, our 200-301 Objectives study questions are in short supply in the market.
200-301 PDF DEMO:
QUESTION NO: 1
Drag and Drop Question
Drag and drop the WLAN components from the left onto the correct descriptions on the right.
Answer:
Explanation:
The service port can be used management purposes, primarily for out-of-band management.
However, AP management traffic is not possible across the service port. In most cases, the service port is used as a "last resort" means of accessing the controller GUI for management purposes. For example, in the case where the system distribution ports on the controller are down or their communication to the wired network is otherwise degraded.
A dynamic interface with the Dynamic AP Management option enabled is used as the tunnel source for packets from the controller to the access point and as the destination for CAPWAP packets from the access point to the controller.
The virtual interface is used to support mobility management, Dynamic Host Configuration Protocol
(DHCP) relay, and embedded Layer 3 security such as guest web authentication. It also maintains the
DNS gateway host name used by Layer 3 security and mobility managers to verify the source of certificates when Layer 3 web authorization is enabled.
Reference: https://www.cisco.com/c/en/us/td/docs/wireless/controller/8-5/config- guide/b_cg85/ports_and_interfaces.html
QUESTION NO: 2
Which two tasks must be performed to configure NTP to a trusted server in client mode on a single network device? (Choose two)
A. Verify the time zone.
B. Disable NTP broadcasts
C. Set the NTP server private key
D. Specify the IP address of the NTP server
E. Enable NTP authentication.
Answer: D,E
Explanation:
To configure authentication, perform this task in privileged mode:
Step 1: Configure an authentication key pair for NTP and specify whether the key will be trusted or untrusted.
Step 2: Set the IP address of the NTP server and the public key.
Step 3: Enable NTP client mode.
Step 4: Enable NTP authentication.
Step 5: Verify the NTP configuration.
Reference: https://www.cisco.com/c/en/us/td/docs/switches/lan/catalyst4000/8-
2glx/configuration/guide/ ntp.html
QUESTION NO: 3
Which statement about Link Aggregation when implemented on a Cisco Wireless LAN
Controller is true?
A. One functional physical port is needed to pass client traffic
B. The EtherChannel must be configured in "mode active"
C. When enabled the WLC bandwidth drops to 500 Mbps
D. To pass client traffic two or more ports must be configured.
Answer: A
Explanation:
Link aggregation (LAG) is a partial implementation of the 802.3ad port aggregation standard. It bundles all of the controller's distribution system ports into a single 802.3ad port channel.
Restriction for Link aggregation:
- LAG requires the EtherChannel to be configured for `mode on' on both the controller and the
Catalyst switch -> Answer B is not correct.
- If the recommended load-balancing method cannot be configured on the Catalyst switch, then configure the LAG connection as a single member link or disable LAG on the controller -> Answer A is not correct while answer D is correct.
Reference: https://www.cisco.com/c/en/us/td/docs/wireless/controller/7-5/configuration- guide/b_cg75/ b_cg75_chapter_0100010.html
QUESTION NO: 4
Refer to the exhibit. After you apply the given configuration to arouter, the DHCP clients behind the device connot communicate with hosts outside of their subnet.
Which action is most likely to correct the problem?
A. configure the default gateway
B. Configure the dns server on the same subnet as the clients
C. Activate the dhcp pool
D. Correct the subnet mask
Answer: A
QUESTION NO: 5
Refer to the exhibit. C-router is to be used as a "router-on-a-stick" to route between the
VLANs.
All the interfaces have been properly configured and IP routing is operational. The hosts in the VLANs have been configured with the appropriate default gateway.
What is true about this configuration?
A. These commands need to be added to the configuration:
C-router(config)# router rip
C-router(config-router)# network 172.19.0.0
B. These commands need to be added to the configuration:
C-router(config)# router ospf 1
C-router(config-router)# network 172.19.0.0 0.0.3.255 area 0
C. These commands need to be added to the configuration:
C-router(config)# router eigrp 123
C-router(config-router)# network 172.19.0.0
D. No further routing configuration is required.
Answer: D
Explanation:
Since all the same router (C-router) is the default gateway for all three VLANs, all traffic destined to a different VLAN will be sent to the C-router. The C-router will have knowledge of all three networks since they will appear as directly connected in the routing table. Since the C-router already knows how to get to all three networks, no routing protocols need to be configured.
Remember that making you 100% pass Cisco certification Salesforce OmniStudio-Consultant exam is Omgzlook. If you still desperately cram knowledge and spend a lot of precious time and energy to prepare for passing Cisco certification CyberArk CPC-SEN exam, and at the same time do not know how to choose a more effective shortcut to pass Cisco certification CyberArk CPC-SEN exam. Microsoft MB-220 - For tomorrow's success, is right to choose Omgzlook. Now you can free download part of practice questions and answers of Cisco certification Salesforce ADM-201 exam on Omgzlook. People who have got Cisco APMG-International AgilePM-Practitioner certification often have much higher salary than counterparts who don't have the certificate.
Updated: May 28, 2022