Our 200-301 Examprep real exam is written by hundreds of experts, and you can rest assured that the contents of the 200-301 Examprep study materials are contained. After obtaining a large amount of first-hand information, our experts will continue to analyze and summarize and write the most comprehensive 200-301 Examprep learning questions possible. And at the same time, we always keep our questions and answers to the most accurate and the latest. 200-301 Examprep study engine can be developed to today, and the principle of customer first is a very important factor. 200-301 Examprep training materials really hope to stand with you, learn together and grow together. If you really want to improve your ability, you should quickly purchase our 200-301 Examprep study braindumps!
CCNA 200-301 Just make your own decisions.
CCNA 200-301 Examprep - Cisco Certified Network Associate Exam And you can free donwload the demos to have a look. With the rapid development of society, people pay more and more attention to knowledge and skills. So every year a large number of people take Latest 200-301 Test Labs tests to prove their abilities.
Holding a professional certificate means you have paid more time and effort than your colleagues or messmates in your major, and have experienced more tests before succeed. Our 200-301 Examprep real questions can offer major help this time. And our 200-301 Examprep study braindumps deliver the value of our services.
Cisco 200-301 Examprep - Selecting Omgzlook means choosing a success
200-301 Examprep exam dumps allow free trial downloads. You can get the information you want to know through the trial version. After downloading our study materials trial version, you can also easily select the version you like, as well as your favorite 200-301 Examprep exam prep, based on which you can make targeted choices. Our study materials want every user to understand the product and be able to really get what they need.
You can free download part of Omgzlook's practice questions and answers about Cisco certification 200-301 Examprep exam online, as an attempt to test our quality. As long as you choose to purchase Omgzlook's products, we will do our best to help you pass Cisco certification 200-301 Examprep exam disposably.
200-301 PDF DEMO:
QUESTION NO: 1
Which two tasks must be performed to configure NTP to a trusted server in client mode on a single network device? (Choose two)
A. Verify the time zone.
B. Disable NTP broadcasts
C. Set the NTP server private key
D. Specify the IP address of the NTP server
E. Enable NTP authentication.
Answer: D,E
Explanation:
To configure authentication, perform this task in privileged mode:
Step 1: Configure an authentication key pair for NTP and specify whether the key will be trusted or untrusted.
Step 2: Set the IP address of the NTP server and the public key.
Step 3: Enable NTP client mode.
Step 4: Enable NTP authentication.
Step 5: Verify the NTP configuration.
Reference: https://www.cisco.com/c/en/us/td/docs/switches/lan/catalyst4000/8-
2glx/configuration/guide/ ntp.html
QUESTION NO: 2
Drag and Drop Question
Drag and drop the WLAN components from the left onto the correct descriptions on the right.
Answer:
Explanation:
The service port can be used management purposes, primarily for out-of-band management.
However, AP management traffic is not possible across the service port. In most cases, the service port is used as a "last resort" means of accessing the controller GUI for management purposes. For example, in the case where the system distribution ports on the controller are down or their communication to the wired network is otherwise degraded.
A dynamic interface with the Dynamic AP Management option enabled is used as the tunnel source for packets from the controller to the access point and as the destination for CAPWAP packets from the access point to the controller.
The virtual interface is used to support mobility management, Dynamic Host Configuration Protocol
(DHCP) relay, and embedded Layer 3 security such as guest web authentication. It also maintains the
DNS gateway host name used by Layer 3 security and mobility managers to verify the source of certificates when Layer 3 web authorization is enabled.
Reference: https://www.cisco.com/c/en/us/td/docs/wireless/controller/8-5/config- guide/b_cg85/ports_and_interfaces.html
QUESTION NO: 3
Refer to the exhibit. After you apply the given configuration to arouter, the DHCP clients behind the device connot communicate with hosts outside of their subnet.
Which action is most likely to correct the problem?
A. configure the default gateway
B. Configure the dns server on the same subnet as the clients
C. Activate the dhcp pool
D. Correct the subnet mask
Answer: A
QUESTION NO: 4
Which statement about Link Aggregation when implemented on a Cisco Wireless LAN
Controller is true?
A. One functional physical port is needed to pass client traffic
B. The EtherChannel must be configured in "mode active"
C. When enabled the WLC bandwidth drops to 500 Mbps
D. To pass client traffic two or more ports must be configured.
Answer: A
Explanation:
Link aggregation (LAG) is a partial implementation of the 802.3ad port aggregation standard. It bundles all of the controller's distribution system ports into a single 802.3ad port channel.
Restriction for Link aggregation:
- LAG requires the EtherChannel to be configured for `mode on' on both the controller and the
Catalyst switch -> Answer B is not correct.
- If the recommended load-balancing method cannot be configured on the Catalyst switch, then configure the LAG connection as a single member link or disable LAG on the controller -> Answer A is not correct while answer D is correct.
Reference: https://www.cisco.com/c/en/us/td/docs/wireless/controller/7-5/configuration- guide/b_cg75/ b_cg75_chapter_0100010.html
QUESTION NO: 5
Refer to the exhibit. C-router is to be used as a "router-on-a-stick" to route between the
VLANs.
All the interfaces have been properly configured and IP routing is operational. The hosts in the VLANs have been configured with the appropriate default gateway.
What is true about this configuration?
A. These commands need to be added to the configuration:
C-router(config)# router rip
C-router(config-router)# network 172.19.0.0
B. These commands need to be added to the configuration:
C-router(config)# router ospf 1
C-router(config-router)# network 172.19.0.0 0.0.3.255 area 0
C. These commands need to be added to the configuration:
C-router(config)# router eigrp 123
C-router(config-router)# network 172.19.0.0
D. No further routing configuration is required.
Answer: D
Explanation:
Since all the same router (C-router) is the default gateway for all three VLANs, all traffic destined to a different VLAN will be sent to the C-router. The C-router will have knowledge of all three networks since they will appear as directly connected in the routing table. Since the C-router already knows how to get to all three networks, no routing protocols need to be configured.
If you also want to get this certificate to increase your job opportunities, please take a few minutes to see our WGU Managing-Human-Capital training materials. Omgzlook's training product for Cisco certification SAP C_C4H320_34 exam includes simulation test and the current examination. With the help of our EMC D-CI-DS-23 practice guide, you don't have to search all kinds of data, because our products are enough to meet your needs. If you think you can face unique challenges in your career, you should pass the Cisco SAP C_HAMOD_2404 exam. Oracle 1z1-071 - Nowadays, online shopping has been greatly developed, but because of the fear of some uncontrollable problems after payment, there are still many people don't trust to buy things online, especially electronic products.
Updated: May 28, 2022