The quality of our 200-301 Examcollection practice dumps deserves your trust.our products have built good reputation in the market. We sincerely hope that you can try our 200-301 Examcollection preparation guide. Our company is trying to satisfy every customer’s demand. No study can be done successfully without a specific goal and a powerful drive, and here to earn a better living by getting promotion is a good one. It is of no exaggeration to say that sometimes a certification is exactly a stepping-stone to success, especially when you are hunting for a job. And they are pleased to give guide for 24 hours online.
CCNA 200-301 You cannot always stay in one place.
Many people have gained good grades after using our 200-301 - Cisco Certified Network Associate Exam Examcollection real dumps, so you will also enjoy the good results. The Valid Free 200-301 Study Questions certification exam training tools contains the latest studied materials of the exam supplied by IT experts. In the past few years, Cisco certification Valid Free 200-301 Study Questions exam has become an influenced computer skills certification exam.
Even if you are newbie, it does not matter as well. To pass the exam in limited time, you will find it as a piece of cake with the help of our 200-301 Examcollection study engine! Our 200-301 Examcollection practice materials are suitable to exam candidates of different levels.
Cisco 200-301 Examcollection - Then you can learn and practice it.
Like the real exam, Omgzlook Cisco 200-301 Examcollection exam dumps not only contain all questions that may appear in the actual exam, also the SOFT version of the dumps comprehensively simulates the real exam. With Omgzlook real questions and answers, when you take the exam, you can handle it with ease and get high marks.
As the quick development of the world economy and intense competition in the international, the world labor market presents many new trends: company’s demand for the excellent people is growing. As is known to us, the 200-301 Examcollection certification is one mainly mark of the excellent.
200-301 PDF DEMO:
QUESTION NO: 1
Drag and Drop Question
Drag and drop the WLAN components from the left onto the correct descriptions on the right.
Answer:
Explanation:
The service port can be used management purposes, primarily for out-of-band management.
However, AP management traffic is not possible across the service port. In most cases, the service port is used as a "last resort" means of accessing the controller GUI for management purposes. For example, in the case where the system distribution ports on the controller are down or their communication to the wired network is otherwise degraded.
A dynamic interface with the Dynamic AP Management option enabled is used as the tunnel source for packets from the controller to the access point and as the destination for CAPWAP packets from the access point to the controller.
The virtual interface is used to support mobility management, Dynamic Host Configuration Protocol
(DHCP) relay, and embedded Layer 3 security such as guest web authentication. It also maintains the
DNS gateway host name used by Layer 3 security and mobility managers to verify the source of certificates when Layer 3 web authorization is enabled.
Reference: https://www.cisco.com/c/en/us/td/docs/wireless/controller/8-5/config- guide/b_cg85/ports_and_interfaces.html
QUESTION NO: 2
Which two tasks must be performed to configure NTP to a trusted server in client mode on a single network device? (Choose two)
A. Verify the time zone.
B. Disable NTP broadcasts
C. Set the NTP server private key
D. Specify the IP address of the NTP server
E. Enable NTP authentication.
Answer: D,E
Explanation:
To configure authentication, perform this task in privileged mode:
Step 1: Configure an authentication key pair for NTP and specify whether the key will be trusted or untrusted.
Step 2: Set the IP address of the NTP server and the public key.
Step 3: Enable NTP client mode.
Step 4: Enable NTP authentication.
Step 5: Verify the NTP configuration.
Reference: https://www.cisco.com/c/en/us/td/docs/switches/lan/catalyst4000/8-
2glx/configuration/guide/ ntp.html
QUESTION NO: 3
Which statement about Link Aggregation when implemented on a Cisco Wireless LAN
Controller is true?
A. One functional physical port is needed to pass client traffic
B. The EtherChannel must be configured in "mode active"
C. When enabled the WLC bandwidth drops to 500 Mbps
D. To pass client traffic two or more ports must be configured.
Answer: A
Explanation:
Link aggregation (LAG) is a partial implementation of the 802.3ad port aggregation standard. It bundles all of the controller's distribution system ports into a single 802.3ad port channel.
Restriction for Link aggregation:
- LAG requires the EtherChannel to be configured for `mode on' on both the controller and the
Catalyst switch -> Answer B is not correct.
- If the recommended load-balancing method cannot be configured on the Catalyst switch, then configure the LAG connection as a single member link or disable LAG on the controller -> Answer A is not correct while answer D is correct.
Reference: https://www.cisco.com/c/en/us/td/docs/wireless/controller/7-5/configuration- guide/b_cg75/ b_cg75_chapter_0100010.html
QUESTION NO: 4
Refer to the exhibit. After you apply the given configuration to arouter, the DHCP clients behind the device connot communicate with hosts outside of their subnet.
Which action is most likely to correct the problem?
A. configure the default gateway
B. Configure the dns server on the same subnet as the clients
C. Activate the dhcp pool
D. Correct the subnet mask
Answer: A
QUESTION NO: 5
Refer to the exhibit. C-router is to be used as a "router-on-a-stick" to route between the
VLANs.
All the interfaces have been properly configured and IP routing is operational. The hosts in the VLANs have been configured with the appropriate default gateway.
What is true about this configuration?
A. These commands need to be added to the configuration:
C-router(config)# router rip
C-router(config-router)# network 172.19.0.0
B. These commands need to be added to the configuration:
C-router(config)# router ospf 1
C-router(config-router)# network 172.19.0.0 0.0.3.255 area 0
C. These commands need to be added to the configuration:
C-router(config)# router eigrp 123
C-router(config-router)# network 172.19.0.0
D. No further routing configuration is required.
Answer: D
Explanation:
Since all the same router (C-router) is the default gateway for all three VLANs, all traffic destined to a different VLAN will be sent to the C-router. The C-router will have knowledge of all three networks since they will appear as directly connected in the routing table. Since the C-router already knows how to get to all three networks, no routing protocols need to be configured.
Our Fortinet NSE7_NST-7.2 exam software offers comprehensive and diverse questions, professional answer analysis and one-year free update service after successful payment; with the help of our Fortinet NSE7_NST-7.2 exam software, you can improve your study ability to obtain Fortinet NSE7_NST-7.2 exam certification. Our APMG-International AgilePM-Foundation training materials are compiled carefully with correct understanding of academic knowledge using the fewest words to express the most clear ideas, rather than unnecessary words expressions or sentences and try to avoid out-of-date words. SAP C_IEE2E_2404 - Omgzlook is worthy your trust. We are willing to provide all people with the demo of our VMware 6V0-31.24 study tool for free. CompTIA 220-1101 exam seems just a small exam, but to get the CompTIA 220-1101 certification exam is to be reckoned in your career.
Updated: May 28, 2022