If you have any questions, please send us an e-mail. We will promptly provide feedback to you and we sincerely help you to solve the problem. Our specialists check daily to find whether there is an update on the 200-301 Ebook study tool. They can not only achieve this, but ingeniously help you remember more content at the same time. We can say that how many the 200-301 Ebook certifications you get and obtain qualification certificates, to some extent determines your future employment and development, as a result, the 200-301 Ebook exam guide is committed to helping you become a competitive workforce, let you have no trouble back at home. Many customers may be doubtful about our price.
CCNA 200-301 In modern society, we are busy every day.
Watch carefully you will find that more and more people are willing to invest time and energy on the 200-301 - Cisco Certified Network Associate Exam Ebook exam, because the exam is not achieved overnight, so many people are trying to find a suitable way. Also the useful small buttons can give you a lot of help on our 200-301 Latest Test Format study guide. Some buttons are used for hide or display answers.
Our users are willing to volunteer for us. You can imagine this is a great set of 200-301 Ebook learning guide! Next, I will introduce you to the most representative advantages of 200-301 Ebook real exam.
Cisco 200-301 Ebook - We will never neglect any user.
Our company is open-handed to offer benefits at intervals, with 200-301 Ebook learning questions priced with reasonable prices. Almost all kinds of working staffs can afford our price, even the students. And we will give some discounts from time to time. Although our 200-301 Ebook practice materials are reasonably available, their value is in-estimate. We offer hearty help for your wish of certificate of the 200-301 Ebook exam.
After your payment is successful, we will send you an email within 5 to 10 minutes. As long as you click on the link, you can use 200-301 Ebook learning materials to learn.
200-301 PDF DEMO:
QUESTION NO: 1
Which statement about Link Aggregation when implemented on a Cisco Wireless LAN
Controller is true?
A. One functional physical port is needed to pass client traffic
B. The EtherChannel must be configured in "mode active"
C. When enabled the WLC bandwidth drops to 500 Mbps
D. To pass client traffic two or more ports must be configured.
Answer: A
Explanation:
Link aggregation (LAG) is a partial implementation of the 802.3ad port aggregation standard. It bundles all of the controller's distribution system ports into a single 802.3ad port channel.
Restriction for Link aggregation:
- LAG requires the EtherChannel to be configured for `mode on' on both the controller and the
Catalyst switch -> Answer B is not correct.
- If the recommended load-balancing method cannot be configured on the Catalyst switch, then configure the LAG connection as a single member link or disable LAG on the controller -> Answer A is not correct while answer D is correct.
Reference: https://www.cisco.com/c/en/us/td/docs/wireless/controller/7-5/configuration- guide/b_cg75/ b_cg75_chapter_0100010.html
QUESTION NO: 2
Drag and Drop Question
Drag and drop the WLAN components from the left onto the correct descriptions on the right.
Answer:
Explanation:
The service port can be used management purposes, primarily for out-of-band management.
However, AP management traffic is not possible across the service port. In most cases, the service port is used as a "last resort" means of accessing the controller GUI for management purposes. For example, in the case where the system distribution ports on the controller are down or their communication to the wired network is otherwise degraded.
A dynamic interface with the Dynamic AP Management option enabled is used as the tunnel source for packets from the controller to the access point and as the destination for CAPWAP packets from the access point to the controller.
The virtual interface is used to support mobility management, Dynamic Host Configuration Protocol
(DHCP) relay, and embedded Layer 3 security such as guest web authentication. It also maintains the
DNS gateway host name used by Layer 3 security and mobility managers to verify the source of certificates when Layer 3 web authorization is enabled.
Reference: https://www.cisco.com/c/en/us/td/docs/wireless/controller/8-5/config- guide/b_cg85/ports_and_interfaces.html
QUESTION NO: 3
Refer to the exhibit. C-router is to be used as a "router-on-a-stick" to route between the
VLANs.
All the interfaces have been properly configured and IP routing is operational. The hosts in the VLANs have been configured with the appropriate default gateway.
What is true about this configuration?
A. These commands need to be added to the configuration:
C-router(config)# router rip
C-router(config-router)# network 172.19.0.0
B. These commands need to be added to the configuration:
C-router(config)# router ospf 1
C-router(config-router)# network 172.19.0.0 0.0.3.255 area 0
C. These commands need to be added to the configuration:
C-router(config)# router eigrp 123
C-router(config-router)# network 172.19.0.0
D. No further routing configuration is required.
Answer: D
Explanation:
Since all the same router (C-router) is the default gateway for all three VLANs, all traffic destined to a different VLAN will be sent to the C-router. The C-router will have knowledge of all three networks since they will appear as directly connected in the routing table. Since the C-router already knows how to get to all three networks, no routing protocols need to be configured.
QUESTION NO: 4
Which two tasks must be performed to configure NTP to a trusted server in client mode on a single network device? (Choose two)
A. Verify the time zone.
B. Disable NTP broadcasts
C. Set the NTP server private key
D. Specify the IP address of the NTP server
E. Enable NTP authentication.
Answer: D,E
Explanation:
To configure authentication, perform this task in privileged mode:
Step 1: Configure an authentication key pair for NTP and specify whether the key will be trusted or untrusted.
Step 2: Set the IP address of the NTP server and the public key.
Step 3: Enable NTP client mode.
Step 4: Enable NTP authentication.
Step 5: Verify the NTP configuration.
Reference: https://www.cisco.com/c/en/us/td/docs/switches/lan/catalyst4000/8-
2glx/configuration/guide/ ntp.html
QUESTION NO: 5
A router running EIGRP has learned the same route from two different paths. Which parameter does the router use to select the best path?
A. administrative distance
B. as-path
C. metric
D. cost
Answer: C
Explanation:
If a router learns two different paths for the same network from the same routing protocol, it has to decide which route is better and will be placed in the routing table. Metric is the measure used to decide which route is better (lower number is better). Each routing protocol uses its own metric.
For example, RIP uses hop counts as a metric, while OSPF uses cost.
https://study-ccna.com/administrative-distance-metric/
Microsoft AZ-800 - They are unsuspecting experts who you can count on. Juniper JN0-683 - In the era of information explosion, people are more longing for knowledge, which bring up people with ability by changing their thirst for knowledge into initiative and "want me to learn" into "I want to learn". So Lpi 201-450 exam dumps are definitely valuable acquisitions. In any case, many people have passed the exam after using Citrix 1Y0-204 training materials. We make Microsoft DP-420 exam prep from exam candidate perspective, and offer high quality practice materials with reasonable prices but various benefits.
Updated: May 28, 2022