Our professional experts have simplified the content of our 200-301 Book study guide and it is easy to be understood by all of our customers all over the world. Just try our 200-301 Book learning braindumps, and you will be satisfied. “There is no royal road to learning.” Learning in the eyes of most people is a difficult thing. That is the reason why we make it without many sales tactics to promote our 200-301 Book learning materials, their brand is good enough to stand out in the market. Download our 200-301 Book training prep as soon as possible and you can begin your review quickly. You are bound to pass the exam if you buy our 200-301 Book learning guide.
CCNA 200-301 So just open our websites in your computer.
To become more powerful and struggle for a new self, getting a professional 200-301 - Cisco Certified Network Associate Exam Book certification is the first step beyond all questions. You can find their real comments in the comments sections. There must be good suggestions for you on the 200-301 Reliable Exam Questions Fee learning quiz as well.
How to get the test 200-301 Book certification in a short time, which determines enough qualification certificates to test our learning ability and application level. This may be a contradiction of the problem, we hope to be able to spend less time and energy to take into account the test 200-301 Book certification, but the qualification examination of the learning process is very wasted energy, so how to achieve the balance? Our 200-301 Book exam prep can be done with its high-efficient merit. Try it now!
Cisco 200-301 Book - It can help you to pass the exam successfully.
With 200-301 Book study engine, you will get rid of the dilemma that you work hard but cannot improve. With our 200-301 Book learning materials, you can spend less time but learn more knowledge than others. 200-301 Book exam questions will help you reach the peak of your career. Just think of that after you get the 200-301 Book certification, you will have a lot of opportunities of going to biger and better company and getting higher incomes! what a brighter future!
Only Omgzlook can guarantee you 100% success. Omgzlook allows you to have a bright future.
200-301 PDF DEMO:
QUESTION NO: 1
Which two tasks must be performed to configure NTP to a trusted server in client mode on a single network device? (Choose two)
A. Verify the time zone.
B. Disable NTP broadcasts
C. Set the NTP server private key
D. Specify the IP address of the NTP server
E. Enable NTP authentication.
Answer: D,E
Explanation:
To configure authentication, perform this task in privileged mode:
Step 1: Configure an authentication key pair for NTP and specify whether the key will be trusted or untrusted.
Step 2: Set the IP address of the NTP server and the public key.
Step 3: Enable NTP client mode.
Step 4: Enable NTP authentication.
Step 5: Verify the NTP configuration.
Reference: https://www.cisco.com/c/en/us/td/docs/switches/lan/catalyst4000/8-
2glx/configuration/guide/ ntp.html
QUESTION NO: 2
Drag and Drop Question
Drag and drop the WLAN components from the left onto the correct descriptions on the right.
Answer:
Explanation:
The service port can be used management purposes, primarily for out-of-band management.
However, AP management traffic is not possible across the service port. In most cases, the service port is used as a "last resort" means of accessing the controller GUI for management purposes. For example, in the case where the system distribution ports on the controller are down or their communication to the wired network is otherwise degraded.
A dynamic interface with the Dynamic AP Management option enabled is used as the tunnel source for packets from the controller to the access point and as the destination for CAPWAP packets from the access point to the controller.
The virtual interface is used to support mobility management, Dynamic Host Configuration Protocol
(DHCP) relay, and embedded Layer 3 security such as guest web authentication. It also maintains the
DNS gateway host name used by Layer 3 security and mobility managers to verify the source of certificates when Layer 3 web authorization is enabled.
Reference: https://www.cisco.com/c/en/us/td/docs/wireless/controller/8-5/config- guide/b_cg85/ports_and_interfaces.html
QUESTION NO: 3
Which statement about Link Aggregation when implemented on a Cisco Wireless LAN
Controller is true?
A. One functional physical port is needed to pass client traffic
B. The EtherChannel must be configured in "mode active"
C. When enabled the WLC bandwidth drops to 500 Mbps
D. To pass client traffic two or more ports must be configured.
Answer: A
Explanation:
Link aggregation (LAG) is a partial implementation of the 802.3ad port aggregation standard. It bundles all of the controller's distribution system ports into a single 802.3ad port channel.
Restriction for Link aggregation:
- LAG requires the EtherChannel to be configured for `mode on' on both the controller and the
Catalyst switch -> Answer B is not correct.
- If the recommended load-balancing method cannot be configured on the Catalyst switch, then configure the LAG connection as a single member link or disable LAG on the controller -> Answer A is not correct while answer D is correct.
Reference: https://www.cisco.com/c/en/us/td/docs/wireless/controller/7-5/configuration- guide/b_cg75/ b_cg75_chapter_0100010.html
QUESTION NO: 4
Refer to the exhibit. After you apply the given configuration to arouter, the DHCP clients behind the device connot communicate with hosts outside of their subnet.
Which action is most likely to correct the problem?
A. configure the default gateway
B. Configure the dns server on the same subnet as the clients
C. Activate the dhcp pool
D. Correct the subnet mask
Answer: A
QUESTION NO: 5
Refer to the exhibit. C-router is to be used as a "router-on-a-stick" to route between the
VLANs.
All the interfaces have been properly configured and IP routing is operational. The hosts in the VLANs have been configured with the appropriate default gateway.
What is true about this configuration?
A. These commands need to be added to the configuration:
C-router(config)# router rip
C-router(config-router)# network 172.19.0.0
B. These commands need to be added to the configuration:
C-router(config)# router ospf 1
C-router(config-router)# network 172.19.0.0 0.0.3.255 area 0
C. These commands need to be added to the configuration:
C-router(config)# router eigrp 123
C-router(config-router)# network 172.19.0.0
D. No further routing configuration is required.
Answer: D
Explanation:
Since all the same router (C-router) is the default gateway for all three VLANs, all traffic destined to a different VLAN will be sent to the C-router. The C-router will have knowledge of all three networks since they will appear as directly connected in the routing table. Since the C-router already knows how to get to all three networks, no routing protocols need to be configured.
In order to facilitate the user's offline reading, the Fortinet NSE7_SDW-7.2 study braindumps can better use the time of debris to learn, especially to develop PDF mode for users. IBM C1000-112 - No matter how high your pursuit of the goal, Omgzlook will make your dreams become a reality. For we have three different versions of our Lpi 300-300 study guide, and you will have different feelings if you have a try on them. APMG-International Better-Business-Cases-Practitioner - If you have a IT dream， then quickly click the click of Omgzlook. At present, our OMG OMG-OCUP2-ADV300study materials can give you a ray of hope.
Updated: May 28, 2022