Omgzlook's Cisco 200-301 Book exam training materials are absolutely trustworthy. We are dedicated to provide the materials to the world of the candidates who want to participate in IT exam. To get the Cisco 200-301 Book exam certification is the goal of many IT people & Network professionals. According to our overall evaluation and research, seldom do we have cases that customers fail the 200-301 Book exam after using our study materials. But to relieve your doubts about failure in the test, we guarantee you a full refund from our company by virtue of the related proof of your report card. And don't worry about how to pass the test, Omgzlook certification training will be with you.
CCNA 200-301 The talent is everywhere in modern society.
Actually, some practice materials are shooting the breeze about their effectiveness, but our 200-301 - Cisco Certified Network Associate Exam Book training quiz are real high quality practice materials with passing rate up to 98 to 100 percent. Opportunities always for those who are well prepared and we wish you not to miss the good opportunities. Omgzlook provide you with the most authoritative and the fullest Cisco New 200-301 Exam Online exam dumps, thus the hit rate is very high.
If you are curious or doubtful about the proficiency of our 200-301 Book preparation quiz, we can explain the painstakingly word we did behind the light. By abstracting most useful content into the 200-301 Book exam materials, they have helped former customers gain success easily and smoothly. The most important part is that all contents were being sifted with diligent attention.
Cisco 200-301 Book - The secret of success is constancy to purpose.
With the rapid development of the economy, the demands of society on us are getting higher and higher. If you can have 200-301 Book certification, then you will be more competitive in society. Our study materials will help you get the according certification you want to have. Believe me, after using our study materials, you will improve your work efficiency. You will get more opportunities than others, and your dreams may really come true in the near future. 200-301 Book test guide will make you more prominent in the labor market than others, and more opportunities will take the initiative to find you.
The content of our 200-301 Book pass guide covers the most of questions in the actual test and all you need to do is review our 200-301 Book vce dumps carefully before taking the exam. Then you can pass the actual test quickly and get certification easily.
200-301 PDF DEMO:
QUESTION NO: 1
Which statement about Link Aggregation when implemented on a Cisco Wireless LAN
Controller is true?
A. One functional physical port is needed to pass client traffic
B. The EtherChannel must be configured in "mode active"
C. When enabled the WLC bandwidth drops to 500 Mbps
D. To pass client traffic two or more ports must be configured.
Answer: A
Explanation:
Link aggregation (LAG) is a partial implementation of the 802.3ad port aggregation standard. It bundles all of the controller's distribution system ports into a single 802.3ad port channel.
Restriction for Link aggregation:
- LAG requires the EtherChannel to be configured for `mode on' on both the controller and the
Catalyst switch -> Answer B is not correct.
- If the recommended load-balancing method cannot be configured on the Catalyst switch, then configure the LAG connection as a single member link or disable LAG on the controller -> Answer A is not correct while answer D is correct.
Reference: https://www.cisco.com/c/en/us/td/docs/wireless/controller/7-5/configuration- guide/b_cg75/ b_cg75_chapter_0100010.html
QUESTION NO: 2
Drag and Drop Question
Drag and drop the WLAN components from the left onto the correct descriptions on the right.
Answer:
Explanation:
The service port can be used management purposes, primarily for out-of-band management.
However, AP management traffic is not possible across the service port. In most cases, the service port is used as a "last resort" means of accessing the controller GUI for management purposes. For example, in the case where the system distribution ports on the controller are down or their communication to the wired network is otherwise degraded.
A dynamic interface with the Dynamic AP Management option enabled is used as the tunnel source for packets from the controller to the access point and as the destination for CAPWAP packets from the access point to the controller.
The virtual interface is used to support mobility management, Dynamic Host Configuration Protocol
(DHCP) relay, and embedded Layer 3 security such as guest web authentication. It also maintains the
DNS gateway host name used by Layer 3 security and mobility managers to verify the source of certificates when Layer 3 web authorization is enabled.
Reference: https://www.cisco.com/c/en/us/td/docs/wireless/controller/8-5/config- guide/b_cg85/ports_and_interfaces.html
QUESTION NO: 3
Refer to the exhibit. C-router is to be used as a "router-on-a-stick" to route between the
VLANs.
All the interfaces have been properly configured and IP routing is operational. The hosts in the VLANs have been configured with the appropriate default gateway.
What is true about this configuration?
A. These commands need to be added to the configuration:
C-router(config)# router rip
C-router(config-router)# network 172.19.0.0
B. These commands need to be added to the configuration:
C-router(config)# router ospf 1
C-router(config-router)# network 172.19.0.0 0.0.3.255 area 0
C. These commands need to be added to the configuration:
C-router(config)# router eigrp 123
C-router(config-router)# network 172.19.0.0
D. No further routing configuration is required.
Answer: D
Explanation:
Since all the same router (C-router) is the default gateway for all three VLANs, all traffic destined to a different VLAN will be sent to the C-router. The C-router will have knowledge of all three networks since they will appear as directly connected in the routing table. Since the C-router already knows how to get to all three networks, no routing protocols need to be configured.
QUESTION NO: 4
Which two tasks must be performed to configure NTP to a trusted server in client mode on a single network device? (Choose two)
A. Verify the time zone.
B. Disable NTP broadcasts
C. Set the NTP server private key
D. Specify the IP address of the NTP server
E. Enable NTP authentication.
Answer: D,E
Explanation:
To configure authentication, perform this task in privileged mode:
Step 1: Configure an authentication key pair for NTP and specify whether the key will be trusted or untrusted.
Step 2: Set the IP address of the NTP server and the public key.
Step 3: Enable NTP client mode.
Step 4: Enable NTP authentication.
Step 5: Verify the NTP configuration.
Reference: https://www.cisco.com/c/en/us/td/docs/switches/lan/catalyst4000/8-
2glx/configuration/guide/ ntp.html
QUESTION NO: 5
A router running EIGRP has learned the same route from two different paths. Which parameter does the router use to select the best path?
A. administrative distance
B. as-path
C. metric
D. cost
Answer: C
Explanation:
If a router learns two different paths for the same network from the same routing protocol, it has to decide which route is better and will be placed in the routing table. Metric is the measure used to decide which route is better (lower number is better). Each routing protocol uses its own metric.
For example, RIP uses hop counts as a metric, while OSPF uses cost.
https://study-ccna.com/administrative-distance-metric/
In addition, there are many other advantages of our CompTIA N10-009 learning guide. Cisco training pdf material is the valid tools which can help you prepare for the Microsoft DP-203 actual test. Linux Foundation FOCP - Omgzlook will never disappoint you. This version of Cisco Google Professional-Cloud-Network-Engineer exam cram materials is rather powerful. So you have nothing to worry about, only to study with our Microsoft MD-102 exam questions with full attention.
Updated: May 28, 2022