The manufacture of our RH-202 Valid Test Study Guide real exam is completely according with strict standard. We do not tolerate any small mistake. We have researched an intelligent system to help testing errors of the RH-202 Valid Test Study Guide exam materials. With our software, passing RH-202 Valid Test Study Guide exam will no longer be the problem. Now are you in preparation for RH-202 Valid Test Study Guide exam? If so, you must be a man with targets. So you need not to summarize by yourself.
To help you pass the RH-202 Valid Test Study Guide exam is our goal.
Red Hat Certification RH-202 Valid Test Study Guide - Redhat Certified Technician on Redhat Enterprise Linux 5 (Labs) Omgzlook can not only save you valuable time, but also make you feel at ease to participate in the exam and pass it successfully. Our products are just suitable for you. Our RH-202 Latest Exam Objectives Pdf exam training dumps will help you master the real test and prepare well for your exam.
The training materials of Omgzlook are developed by many IT experts' continuously using their experience and knowledge to study, and the quality is very good and have very high accuracy. Once you select our Omgzlook, we can not only help you pass RedHat certification RH-202 Valid Test Study Guide exam and consolidate their IT expertise, but also have a one-year free after-sale Update Service. Omgzlook is a website to provide a targeted training for RedHat certification RH-202 Valid Test Study Guide exam.
Our RedHat RH-202 Valid Test Study Guide latest study guide can help you.
Omgzlook is an excellent source of information on IT Certifications. In the Omgzlook, you can find study skills and learning materials for your exam. Omgzlook's RedHat RH-202 Valid Test Study Guide training materials are studied by the experienced IT experts. It has a strong accuracy and logic. To encounter Omgzlook, you will encounter the best training materials. You can rest assured that using our RedHat RH-202 Valid Test Study Guide exam training materials. With it, you have done fully prepared to meet this exam.
Most returned customers said that our RH-202 Valid Test Study Guide dumps pdf covers the big part of main content of the certification exam. Questions and answers from our RH-202 Valid Test Study Guide free download files are tested by our certified professionals and the accuracy of our questions are 100% guaranteed.
RH-202 PDF DEMO:
QUESTION NO: 1
swapon /dev/hda? To enable the Swap space from partition.
QUESTION NO: 2
mkswap /dev/hda? To create Swap File system on partition.
QUESTION NO: 3
free -m Verify Either Swap is enabled or not.
QUESTION NO: 4
Verify by mounting on current Sessions also:
mount /dev/hda? /data
5. You are new System Administrator and from now you are going to handle the system and your main task is Network monitoring, Backup and Restore. But you don't know the root password. Change the root password to redhat and login in default Runlevel.
Answer and Explanation:
When you Boot the System, it starts on default Runlevel specified in /etc/inittab: Id:?:initdefault:
When System Successfully boot, it will ask for username and password. But you don't know the root's password. To change the root password you need to boot the system into single user mode. You can pass the kernel arguments from the boot loader.
1. Restart the System.
2. You will get the boot loader GRUB screen.
3. Press a and type 1 or s for single mode ro root=LABEL=/ rhgb queit s
4. System will boot on Single User mode.
5. Use passwd command to change.
6. Press ctrl+d
6. There are more then 400 Computers in your Office. You are appointed as a System Administrator. But you don't have Router. So, you are going to use your One Linux Server as a Router. How will you enable
IP packets forward?
Answer and Explanation:
1. /proc is the virtual filesystem, we use /proc to modify the kernel parameters at running time.
# echo "1" >/proc/sys/net/ipv4/ip_forward
2. /etc/sysctl.conf when System Reboot on next time, /etc/rc.d/rc.sysinit scripts reads the file
/etc/sysctl.conf. To enable the IP forwarding on next reboot also you need to set the parameter. net.ipv4.ip_forward=1
Here 0 means disable, 1 means enable.
7. You Completely Install the Redhat Enterprise Linux ES 4 on your System. While start the system, it's giving error to load X window System. How will you fix that problem and make boot successfully run X
Window System.
Answer and Explanation:
Think while Problems occurred on booting System on Runlevel 5 (X Window).
1. /tmp is full or not
2. Quota is already reached
3. Video card or resolution or monitor is misconfigured.
4. xfs service is running or not.
Do These:
1. df -h /tmp /tmp is full remove the unnecessary file
2. quota username if quota is already reached remove unnecessary file from home directory.
3. Boot the System in runlevel 3. you can pass the Kernel Argument from boot loader.
4. Use command: system-config-display It will display a dialog to configure the monitor, Video card, resolution etc.
5. Set the Default Runlevel 5 in /etc/inittab id:5:initdefault:
6. Reboot the System you will get the GUI login Screen.
8. There are two different networks, 192.168.0.0/24 and 192.168.1.0/24. Your System is in 192.168.0.0/24
Network. One RHEL 4 Installed System is going to use as a Router. All required configuration is already done on Linux Server. Where 192.168.0.254 and 192.168.1.254 IP Address are assigned on that Server.
How will make successfully ping to 192.168.1.0/24 Network's Host?
Answer:
1. vi /etc/sysconfig/network
GATEWAY=192.168.0.254
OR
vi /etc/sysconf/network-scripts/ifcfg-eth0
DEVICE=eth0
BOOTPROTO=static
ONBOOT=yes
IPADDR=192.168.0.?
NETMASK=255.255.255.0
GATEWAY=192.168.0.254
2. service network restart
Explanation: Gateway defines the way to exit the packets. According to question System working as a router for two networks have IP Address 192.168.0.254 and 192.168.1.254. To get the hosts on
192.168.1.0/24 should go through 192.168.0.254.
9. Make a swap partition having 100MB. Make Automatically Usable at System Boot Time.
Answer and Explanation:
1. Use fdisk /dev/hda To create new partition.
2. Type n For New partition
3. It will ask for Logical or Primary Partitions. Press l for logical.
4. It will ask for the Starting Cylinder: Use the Default by pressing Enter Key.
5. Type the Size: +100M You can Specify either Last cylinder of Size here.
6. Press P to verify the partitions lists and remember the partitions name.
Default System ID is 83 that means Linux Native.
7. Type t to change the System ID of partition.
8. Type Partition Number
9. Type 82 that means Linux Swap.
10. Press w to write on partitions table.
11. Either Reboot or use partprobe command.
QUESTION NO: 5
vi /etc/fstab
Write:
/dev/hda? /data ext3 defaults 1 2
If you are tired of preparing RedHat Cisco 200-901 exam, you can choose Omgzlook RedHat Cisco 200-901 certification training materials. We strive for perfection all these years and get satisfactory results with concerted cooperation between experts, and all questions points in our IBM C1000-127 real exam are devised and written base on the real exam. Omgzlook RedHat SAP C_ARSCC_2404 exam dumps are the best reference materials. Although you will take each ISQI CTAL-TTA_Syll19_4.0 online test one at a time - each one builds upon the previous. Omgzlook won a good reputation by these candidates that have passed RedHat SAP C_THR87_2405 certification exam.
Updated: May 27, 2022