We would like to provide our customers with different kinds of RH-202 Reliable Study Guide Book practice guide to learn, and help them accumulate knowledge and enhance their ability. Besides, we guarantee that the RH-202 Reliable Study Guide Book exam questions of all our users can be answered by professional personal in the shortest time with our RH-202 Reliable Study Guide Book study dumps. One more to mention, we can help you make full use of your sporadic time to absorb knowledge and information. RH-202 Reliable Study Guide Book exam practice software allows you to practice on real RH-202 Reliable Study Guide Book questions. The RH-202 Reliable Study Guide Book Practice Exam consists of multiple practice modes, with practice history records and self-assessment reports. This means with our products you can prepare for exams efficiently and at the same time you will get 100% success for sure.
Red Hat Certification RH-202 It is your right time to make your mark.
Secondly, since our RH-202 - Redhat Certified Technician on Redhat Enterprise Linux 5 (Labs) Reliable Study Guide Book training quiz appeared on the market, seldom do we have the cases of customer information disclosure. But our New RH-202 Exam Registration real exam is high efficient which can pass the New RH-202 Exam Registration exam during a week. To prevent you from promiscuous state, we arranged our New RH-202 Exam Registration learning materials with clear parts of knowledge.
The questions of our RH-202 Reliable Study Guide Book guide questions are related to the latest and basic knowledge. What’s more, our RH-202 Reliable Study Guide Book learning materials are committed to grasp the most knowledgeable points with the fewest problems. So 20-30 hours of study is enough for you to deal with the exam.
RedHat RH-202 Reliable Study Guide Book - They will mitigate your chance of losing.
Dear customers, you may think it is out of your league before such as winning the RH-202 Reliable Study Guide Book exam practice is possible within a week or a RH-202 Reliable Study Guide Book practice material could have passing rate over 98 percent. This time it will not be illusions for you anymore. You can learn some authentic knowledge with our high accuracy and efficiency RH-202 Reliable Study Guide Book simulating questions and help you get authentic knowledge of the exam.
You can send us an email to ask questions at anytime, anywhere. For any questions you may have during the use of RH-202 Reliable Study Guide Book exam questions, our customer service staff will be patient to help you to solve them.
RH-202 PDF DEMO:
QUESTION NO: 1
swapon /dev/hda? To enable the Swap space from partition.
QUESTION NO: 2
mkswap /dev/hda? To create Swap File system on partition.
QUESTION NO: 3
free -m Verify Either Swap is enabled or not.
QUESTION NO: 4
Verify by mounting on current Sessions also:
mount /dev/hda? /data
5. You are new System Administrator and from now you are going to handle the system and your main task is Network monitoring, Backup and Restore. But you don't know the root password. Change the root password to redhat and login in default Runlevel.
Answer and Explanation:
When you Boot the System, it starts on default Runlevel specified in /etc/inittab: Id:?:initdefault:
When System Successfully boot, it will ask for username and password. But you don't know the root's password. To change the root password you need to boot the system into single user mode. You can pass the kernel arguments from the boot loader.
1. Restart the System.
2. You will get the boot loader GRUB screen.
3. Press a and type 1 or s for single mode ro root=LABEL=/ rhgb queit s
4. System will boot on Single User mode.
5. Use passwd command to change.
6. Press ctrl+d
6. There are more then 400 Computers in your Office. You are appointed as a System Administrator. But you don't have Router. So, you are going to use your One Linux Server as a Router. How will you enable
IP packets forward?
Answer and Explanation:
1. /proc is the virtual filesystem, we use /proc to modify the kernel parameters at running time.
# echo "1" >/proc/sys/net/ipv4/ip_forward
2. /etc/sysctl.conf when System Reboot on next time, /etc/rc.d/rc.sysinit scripts reads the file
/etc/sysctl.conf. To enable the IP forwarding on next reboot also you need to set the parameter. net.ipv4.ip_forward=1
Here 0 means disable, 1 means enable.
7. You Completely Install the Redhat Enterprise Linux ES 4 on your System. While start the system, it's giving error to load X window System. How will you fix that problem and make boot successfully run X
Window System.
Answer and Explanation:
Think while Problems occurred on booting System on Runlevel 5 (X Window).
1. /tmp is full or not
2. Quota is already reached
3. Video card or resolution or monitor is misconfigured.
4. xfs service is running or not.
Do These:
1. df -h /tmp /tmp is full remove the unnecessary file
2. quota username if quota is already reached remove unnecessary file from home directory.
3. Boot the System in runlevel 3. you can pass the Kernel Argument from boot loader.
4. Use command: system-config-display It will display a dialog to configure the monitor, Video card, resolution etc.
5. Set the Default Runlevel 5 in /etc/inittab id:5:initdefault:
6. Reboot the System you will get the GUI login Screen.
8. There are two different networks, 192.168.0.0/24 and 192.168.1.0/24. Your System is in 192.168.0.0/24
Network. One RHEL 4 Installed System is going to use as a Router. All required configuration is already done on Linux Server. Where 192.168.0.254 and 192.168.1.254 IP Address are assigned on that Server.
How will make successfully ping to 192.168.1.0/24 Network's Host?
Answer:
1. vi /etc/sysconfig/network
GATEWAY=192.168.0.254
OR
vi /etc/sysconf/network-scripts/ifcfg-eth0
DEVICE=eth0
BOOTPROTO=static
ONBOOT=yes
IPADDR=192.168.0.?
NETMASK=255.255.255.0
GATEWAY=192.168.0.254
2. service network restart
Explanation: Gateway defines the way to exit the packets. According to question System working as a router for two networks have IP Address 192.168.0.254 and 192.168.1.254. To get the hosts on
192.168.1.0/24 should go through 192.168.0.254.
9. Make a swap partition having 100MB. Make Automatically Usable at System Boot Time.
Answer and Explanation:
1. Use fdisk /dev/hda To create new partition.
2. Type n For New partition
3. It will ask for Logical or Primary Partitions. Press l for logical.
4. It will ask for the Starting Cylinder: Use the Default by pressing Enter Key.
5. Type the Size: +100M You can Specify either Last cylinder of Size here.
6. Press P to verify the partitions lists and remember the partitions name.
Default System ID is 83 that means Linux Native.
7. Type t to change the System ID of partition.
8. Type Partition Number
9. Type 82 that means Linux Swap.
10. Press w to write on partitions table.
11. Either Reboot or use partprobe command.
QUESTION NO: 5
vi /etc/fstab
Write:
/dev/hda? /data ext3 defaults 1 2
With our Hitachi HQT-4230 study materials, all your agreeable outcomes are no longer dreams for you. Only 20-30 hours on our Dell D-AX-RH-A-00 learning guide are needed for the client to prepare for the test and it saves our client’s time and energy. Our Dell D-PWF-RDY-A-00 learning material was compiled from the wisdom and sweat of many industry experts. We can make sure that our Dell D-SRM-A-01 study materials have the ability to help you solve your problem, and you will not be troubled by these questions above. The exercises and answers of our HP HPE0-G01 exam questions are designed by our experts to perfectly answer the puzzles you may encounter in preparing for the exam and save you valuable time.
Updated: May 27, 2022