Our RH-202 New Study Questions Book exam questions almost guarantee that you pass the exam. Even if you don't pass, you don't have to pay any price for our RH-202 New Study Questions Book simulating exam for we have money back guarantee to all of our exam materials. I hope we have enough sincerity to impress you. Go against the water and retreat if you fail to enter. The pressure of competition is so great now. That is to say, as long as you choose our study materials and carefully review according to its content, passing the RH-202 New Study Questions Book exam is a piece of cake.
Red Hat Certification RH-202 In fact, you do not need other reference books.
Omgzlook follows the career ethic of providing the first-class RH-202 - Redhat Certified Technician on Redhat Enterprise Linux 5 (Labs) New Study Questions Book practice questions for you. Through the learning materials and exam practice questions and answers provided by Omgzlook, we can ensure you have a successful challenge when you are the first time to participate in the RedHat certification RH-202 Valid Test Answers exam. Above all, using Omgzlook you do not spend a lot of time and effort to prepare for the exam.
Just come to buy our RH-202 New Study Questions Book learning guide and you will love it. RH-202 New Study Questions Book study materials can expedite your review process, inculcate your knowledge of the exam and last but not the least, speed up your pace of review dramatically. The finicky points can be solved effectively by using our RH-202 New Study Questions Book exam questions.
RedHat RH-202 New Study Questions Book - They believe and rely on us.
We have handled professional RH-202 New Study Questions Book practice materials for over ten years. Our experts have many years’ experience in this particular line of business, together with meticulous and professional attitude towards jobs. Their abilities are unquestionable, besides, RH-202 New Study Questions Book exam questions are priced reasonably with three kinds: the PDF, Software and APP online. Though the content is the same, but their displays are totally different and functionable.
In order to prevent your life from regret and remorse, you should seize every opportunity which can change lives passibly. Did you do it? Omgzlook's RedHat RH-202 New Study Questions Book exam training materials can help you to achieve your success.
RH-202 PDF DEMO:
QUESTION NO: 1
mkswap /dev/hda? To create Swap File system on partition.
QUESTION NO: 2
Verify by mounting on current Sessions also:
mount /dev/hda? /data
5. You are new System Administrator and from now you are going to handle the system and your main task is Network monitoring, Backup and Restore. But you don't know the root password. Change the root password to redhat and login in default Runlevel.
Answer and Explanation:
When you Boot the System, it starts on default Runlevel specified in /etc/inittab: Id:?:initdefault:
When System Successfully boot, it will ask for username and password. But you don't know the root's password. To change the root password you need to boot the system into single user mode. You can pass the kernel arguments from the boot loader.
1. Restart the System.
2. You will get the boot loader GRUB screen.
3. Press a and type 1 or s for single mode ro root=LABEL=/ rhgb queit s
4. System will boot on Single User mode.
5. Use passwd command to change.
6. Press ctrl+d
6. There are more then 400 Computers in your Office. You are appointed as a System Administrator. But you don't have Router. So, you are going to use your One Linux Server as a Router. How will you enable
IP packets forward?
Answer and Explanation:
1. /proc is the virtual filesystem, we use /proc to modify the kernel parameters at running time.
# echo "1" >/proc/sys/net/ipv4/ip_forward
2. /etc/sysctl.conf when System Reboot on next time, /etc/rc.d/rc.sysinit scripts reads the file
/etc/sysctl.conf. To enable the IP forwarding on next reboot also you need to set the parameter. net.ipv4.ip_forward=1
Here 0 means disable, 1 means enable.
7. You Completely Install the Redhat Enterprise Linux ES 4 on your System. While start the system, it's giving error to load X window System. How will you fix that problem and make boot successfully run X
Window System.
Answer and Explanation:
Think while Problems occurred on booting System on Runlevel 5 (X Window).
1. /tmp is full or not
2. Quota is already reached
3. Video card or resolution or monitor is misconfigured.
4. xfs service is running or not.
Do These:
1. df -h /tmp /tmp is full remove the unnecessary file
2. quota username if quota is already reached remove unnecessary file from home directory.
3. Boot the System in runlevel 3. you can pass the Kernel Argument from boot loader.
4. Use command: system-config-display It will display a dialog to configure the monitor, Video card, resolution etc.
5. Set the Default Runlevel 5 in /etc/inittab id:5:initdefault:
6. Reboot the System you will get the GUI login Screen.
8. There are two different networks, 192.168.0.0/24 and 192.168.1.0/24. Your System is in 192.168.0.0/24
Network. One RHEL 4 Installed System is going to use as a Router. All required configuration is already done on Linux Server. Where 192.168.0.254 and 192.168.1.254 IP Address are assigned on that Server.
How will make successfully ping to 192.168.1.0/24 Network's Host?
Answer:
1. vi /etc/sysconfig/network
GATEWAY=192.168.0.254
OR
vi /etc/sysconf/network-scripts/ifcfg-eth0
DEVICE=eth0
BOOTPROTO=static
ONBOOT=yes
IPADDR=192.168.0.?
NETMASK=255.255.255.0
GATEWAY=192.168.0.254
2. service network restart
Explanation: Gateway defines the way to exit the packets. According to question System working as a router for two networks have IP Address 192.168.0.254 and 192.168.1.254. To get the hosts on
192.168.1.0/24 should go through 192.168.0.254.
9. Make a swap partition having 100MB. Make Automatically Usable at System Boot Time.
Answer and Explanation:
1. Use fdisk /dev/hda To create new partition.
2. Type n For New partition
3. It will ask for Logical or Primary Partitions. Press l for logical.
4. It will ask for the Starting Cylinder: Use the Default by pressing Enter Key.
5. Type the Size: +100M You can Specify either Last cylinder of Size here.
6. Press P to verify the partitions lists and remember the partitions name.
Default System ID is 83 that means Linux Native.
7. Type t to change the System ID of partition.
8. Type Partition Number
9. Type 82 that means Linux Swap.
10. Press w to write on partitions table.
11. Either Reboot or use partprobe command.
QUESTION NO: 3
vi /etc/fstab
Write:
/dev/hda? /data ext3 defaults 1 2
QUESTION NO: 4
swapon /dev/hda? To enable the Swap space from partition.
QUESTION NO: 5
Use mkfs -t ext3 /dev/hda?
Or
mke2fs -j /dev/hda? To create ext3 filesystem.
Our EMC D-CIS-FN-23 practice questions enjoy great popularity in this line. IBM C1000-174 - So that you will have the confidence to win the exam. IBM C1000-180 - It is a long process to compilation. Dell D-PDM-A-01 - Do you feel headache looking at so many IT certification exams and so many exam materials? What should you do? Which materials do you choose? If you don't know how to choose, I choose your best exam materials for you. SAP C_TS410_2022 - If you are interested in our products, I believe that after your trial, you will certainly not hesitate to buy it.
Updated: May 27, 2022