After confirmation, we will immediately refund all the money that you purchased the RH-202 New Practice Questions Book exam materials. Omgzlook is worthy your trust. It is impossible to pass RH-202 New Practice Questions Book exam without efforts and time, but our Omgzlook team will try our best to reduce your burden when you are preparing for RH-202 New Practice Questions Book exam. More importantly, we provide all people with the trial demo for free before you buy our RH-202 New Practice Questions Book exam torrent and it means that you have the chance to download from our web page for free; you do not need to spend any money. We are willing to provide all people with the demo of our RH-202 New Practice Questions Book study tool for free. Sometimes a small step is possible to be a big step in life.
Red Hat Certification RH-202 We provide one-year customer service; 4.
Red Hat Certification RH-202 New Practice Questions Book - Redhat Certified Technician on Redhat Enterprise Linux 5 (Labs) Perhaps you have wasted a lot of time to playing computer games. If you are urgent to pass exam our exam materials will be suitable for you. Mostly you just need to remember the questions and answers of our RedHat Latest Test Dumps RH-202 Sheet exam review questions and you will clear exams.
There is no doubt that the certification has become more and more important for a lot of people, especial these people who are looking for a good job, and it has been a general trend. More and more workers have to spend a lot of time on meeting the challenge of gaining the RH-202 New Practice Questions Book certification by sitting for an exam. It is known to us that more and more companies start to pay high attention to the RH-202 New Practice Questions Book certification of the candidates.
RedHat RH-202 New Practice Questions Book - So stop hesitation and buy our study materials.
Preparing for the RH-202 New Practice Questions Book real exam is easier if you can select the right test questions and be sure of the answers. The RH-202 New Practice Questions Book test answers are tested and approved by our certified experts and you can check the accuracy of our questions from our free demo. Expert for one-year free updating of RH-202 New Practice Questions Book dumps pdf, we promise you full refund if you failed exam with our dumps.
So you just need to memorize our correct questions and answers of the RH-202 New Practice Questions Book study materials. You absolutely can pass the exam.
RH-202 PDF DEMO:
QUESTION NO: 1
mkswap /dev/hda? To create Swap File system on partition.
QUESTION NO: 2
Verify by mounting on current Sessions also:
mount /dev/hda? /data
5. You are new System Administrator and from now you are going to handle the system and your main task is Network monitoring, Backup and Restore. But you don't know the root password. Change the root password to redhat and login in default Runlevel.
Answer and Explanation:
When you Boot the System, it starts on default Runlevel specified in /etc/inittab: Id:?:initdefault:
When System Successfully boot, it will ask for username and password. But you don't know the root's password. To change the root password you need to boot the system into single user mode. You can pass the kernel arguments from the boot loader.
1. Restart the System.
2. You will get the boot loader GRUB screen.
3. Press a and type 1 or s for single mode ro root=LABEL=/ rhgb queit s
4. System will boot on Single User mode.
5. Use passwd command to change.
6. Press ctrl+d
6. There are more then 400 Computers in your Office. You are appointed as a System Administrator. But you don't have Router. So, you are going to use your One Linux Server as a Router. How will you enable
IP packets forward?
Answer and Explanation:
1. /proc is the virtual filesystem, we use /proc to modify the kernel parameters at running time.
# echo "1" >/proc/sys/net/ipv4/ip_forward
2. /etc/sysctl.conf when System Reboot on next time, /etc/rc.d/rc.sysinit scripts reads the file
/etc/sysctl.conf. To enable the IP forwarding on next reboot also you need to set the parameter. net.ipv4.ip_forward=1
Here 0 means disable, 1 means enable.
7. You Completely Install the Redhat Enterprise Linux ES 4 on your System. While start the system, it's giving error to load X window System. How will you fix that problem and make boot successfully run X
Window System.
Answer and Explanation:
Think while Problems occurred on booting System on Runlevel 5 (X Window).
1. /tmp is full or not
2. Quota is already reached
3. Video card or resolution or monitor is misconfigured.
4. xfs service is running or not.
Do These:
1. df -h /tmp /tmp is full remove the unnecessary file
2. quota username if quota is already reached remove unnecessary file from home directory.
3. Boot the System in runlevel 3. you can pass the Kernel Argument from boot loader.
4. Use command: system-config-display It will display a dialog to configure the monitor, Video card, resolution etc.
5. Set the Default Runlevel 5 in /etc/inittab id:5:initdefault:
6. Reboot the System you will get the GUI login Screen.
8. There are two different networks, 192.168.0.0/24 and 192.168.1.0/24. Your System is in 192.168.0.0/24
Network. One RHEL 4 Installed System is going to use as a Router. All required configuration is already done on Linux Server. Where 192.168.0.254 and 192.168.1.254 IP Address are assigned on that Server.
How will make successfully ping to 192.168.1.0/24 Network's Host?
Answer:
1. vi /etc/sysconfig/network
GATEWAY=192.168.0.254
OR
vi /etc/sysconf/network-scripts/ifcfg-eth0
DEVICE=eth0
BOOTPROTO=static
ONBOOT=yes
IPADDR=192.168.0.?
NETMASK=255.255.255.0
GATEWAY=192.168.0.254
2. service network restart
Explanation: Gateway defines the way to exit the packets. According to question System working as a router for two networks have IP Address 192.168.0.254 and 192.168.1.254. To get the hosts on
192.168.1.0/24 should go through 192.168.0.254.
9. Make a swap partition having 100MB. Make Automatically Usable at System Boot Time.
Answer and Explanation:
1. Use fdisk /dev/hda To create new partition.
2. Type n For New partition
3. It will ask for Logical or Primary Partitions. Press l for logical.
4. It will ask for the Starting Cylinder: Use the Default by pressing Enter Key.
5. Type the Size: +100M You can Specify either Last cylinder of Size here.
6. Press P to verify the partitions lists and remember the partitions name.
Default System ID is 83 that means Linux Native.
7. Type t to change the System ID of partition.
8. Type Partition Number
9. Type 82 that means Linux Swap.
10. Press w to write on partitions table.
11. Either Reboot or use partprobe command.
QUESTION NO: 3
vi /etc/fstab
Write:
/dev/hda? /data ext3 defaults 1 2
QUESTION NO: 4
swapon /dev/hda? To enable the Swap space from partition.
QUESTION NO: 5
Use mkfs -t ext3 /dev/hda?
Or
mke2fs -j /dev/hda? To create ext3 filesystem.
Our website offers you the most comprehensive Dell D-SRM-A-01 study guide for the actual test and the best quality service for aftersales. Amazon SAA-C03-KR - You can take advantage of the certification. For most busy IT workers, Amazon SOA-C02 dumps pdf is the best alternative to your time and money to secure the way of success in the IT filed. Our Splunk SPLK-1002 study materials allow you to improve your competitiveness in a short period of time. You can find latest Microsoft PL-300-KR test answers and questions in our pass guide and the detailed explanations will help you understand the content easier.
Updated: May 27, 2022