And if you get any questions, please get contact with us, our staff will be online 24/7 to solve your problems all the way. Before you place orders, you can download the free demos of RH-202 Latest Study Guide Ebook practice test as experimental acquaintance. Once you decide to buy, you will have many benefits like free update lasting one-year and convenient payment mode. So choosing appropriate RH-202 Latest Study Guide Ebook test guide is important for you to pass the exam. One thing we are sure, that is our RH-202 Latest Study Guide Ebook certification material is reliable. And if you buy our RH-202 Latest Study Guide Ebook exam materials, then you will find that passing the exam is just a piece of cake in front of you.
Red Hat Certification RH-202 We have always advocated customer first.
Our company attaches great importance on improving the RH-202 - Redhat Certified Technician on Redhat Enterprise Linux 5 (Labs) Latest Study Guide Ebook study prep. After you use our study materials, you can get RH-202 Reliable Exam Pass4Sure certification, which will better show your ability, among many competitors, you will be very prominent. Using RH-202 Reliable Exam Pass4Sure exam prep is an important step for you to improve your soft power.
But you must have a browser on your device. Also, you must open the online engine of the study materials in a network environment for the first time. In addition, the RH-202 Latest Study Guide Ebook study dumps don’t occupy the memory of your computer.
RedHat RH-202 Latest Study Guide Ebook - It will be a first step to achieve your dreams.
There may be a lot of people feel that the preparation process for RH-202 Latest Study Guide Ebook exams is hard and boring, and hard work does not necessarily mean good results, which is an important reason why many people are afraid of examinations. Today, our RH-202 Latest Study Guide Ebook exam materials will radically change this. High question hit rate makes you no longer aimless when preparing for the exam, so you just should review according to the content of our RH-202 Latest Study Guide Ebook study guide prepared for you.
So there is nothing to worry about, just buy our RH-202 Latest Study Guide Ebook exam questions. It is our consistent aim to serve our customers wholeheartedly.
RH-202 PDF DEMO:
QUESTION NO: 1
Verify by mounting on current Sessions also:
mount /dev/hda? /data
5. You are new System Administrator and from now you are going to handle the system and your main task is Network monitoring, Backup and Restore. But you don't know the root password. Change the root password to redhat and login in default Runlevel.
Answer and Explanation:
When you Boot the System, it starts on default Runlevel specified in /etc/inittab: Id:?:initdefault:
When System Successfully boot, it will ask for username and password. But you don't know the root's password. To change the root password you need to boot the system into single user mode. You can pass the kernel arguments from the boot loader.
1. Restart the System.
2. You will get the boot loader GRUB screen.
3. Press a and type 1 or s for single mode ro root=LABEL=/ rhgb queit s
4. System will boot on Single User mode.
5. Use passwd command to change.
6. Press ctrl+d
6. There are more then 400 Computers in your Office. You are appointed as a System Administrator. But you don't have Router. So, you are going to use your One Linux Server as a Router. How will you enable
IP packets forward?
Answer and Explanation:
1. /proc is the virtual filesystem, we use /proc to modify the kernel parameters at running time.
# echo "1" >/proc/sys/net/ipv4/ip_forward
2. /etc/sysctl.conf when System Reboot on next time, /etc/rc.d/rc.sysinit scripts reads the file
/etc/sysctl.conf. To enable the IP forwarding on next reboot also you need to set the parameter. net.ipv4.ip_forward=1
Here 0 means disable, 1 means enable.
7. You Completely Install the Redhat Enterprise Linux ES 4 on your System. While start the system, it's giving error to load X window System. How will you fix that problem and make boot successfully run X
Window System.
Answer and Explanation:
Think while Problems occurred on booting System on Runlevel 5 (X Window).
1. /tmp is full or not
2. Quota is already reached
3. Video card or resolution or monitor is misconfigured.
4. xfs service is running or not.
Do These:
1. df -h /tmp /tmp is full remove the unnecessary file
2. quota username if quota is already reached remove unnecessary file from home directory.
3. Boot the System in runlevel 3. you can pass the Kernel Argument from boot loader.
4. Use command: system-config-display It will display a dialog to configure the monitor, Video card, resolution etc.
5. Set the Default Runlevel 5 in /etc/inittab id:5:initdefault:
6. Reboot the System you will get the GUI login Screen.
8. There are two different networks, 192.168.0.0/24 and 192.168.1.0/24. Your System is in 192.168.0.0/24
Network. One RHEL 4 Installed System is going to use as a Router. All required configuration is already done on Linux Server. Where 192.168.0.254 and 192.168.1.254 IP Address are assigned on that Server.
How will make successfully ping to 192.168.1.0/24 Network's Host?
Answer:
1. vi /etc/sysconfig/network
GATEWAY=192.168.0.254
OR
vi /etc/sysconf/network-scripts/ifcfg-eth0
DEVICE=eth0
BOOTPROTO=static
ONBOOT=yes
IPADDR=192.168.0.?
NETMASK=255.255.255.0
GATEWAY=192.168.0.254
2. service network restart
Explanation: Gateway defines the way to exit the packets. According to question System working as a router for two networks have IP Address 192.168.0.254 and 192.168.1.254. To get the hosts on
192.168.1.0/24 should go through 192.168.0.254.
9. Make a swap partition having 100MB. Make Automatically Usable at System Boot Time.
Answer and Explanation:
1. Use fdisk /dev/hda To create new partition.
2. Type n For New partition
3. It will ask for Logical or Primary Partitions. Press l for logical.
4. It will ask for the Starting Cylinder: Use the Default by pressing Enter Key.
5. Type the Size: +100M You can Specify either Last cylinder of Size here.
6. Press P to verify the partitions lists and remember the partitions name.
Default System ID is 83 that means Linux Native.
7. Type t to change the System ID of partition.
8. Type Partition Number
9. Type 82 that means Linux Swap.
10. Press w to write on partitions table.
11. Either Reboot or use partprobe command.
QUESTION NO: 2
mkswap /dev/hda? To create Swap File system on partition.
QUESTION NO: 3
vi /etc/fstab
Write:
/dev/hda? /data ext3 defaults 1 2
QUESTION NO: 4
Use mkfs -t ext3 /dev/hda?
Or
mke2fs -j /dev/hda? To create ext3 filesystem.
QUESTION NO: 5
swapon /dev/hda? To enable the Swap space from partition.
ISACA CISA-CN - Our target is to reduce your pressure and improve your learning efficiency from preparing exam. If you buy our SAP C_THR96_2405 exam questions, then you will find that Our SAP C_THR96_2405 actual exam has covered all the knowledge that must be mastered in the exam. And our Microsoft SC-100 training questions are popular in the market. So, please give the SAP C-THR96-2405 study materials a chance to help you. Cisco 700-805 - The three versions are very flexible for all customers to operate.
Updated: May 27, 2022