Our passing rate is high so that you have little probability to fail in the exam because the AZ-220 New Study Guide Questions guide torrent is of high quality. But if you fail in exam unfortunately we will refund you in full immediately at one time and the procedures are simple and fast. If you have any questions about Microsoft Azure IoT Developer test torrent or there are any problems existing in the process of the refund you can contact us by mails or contact our online customer service personnel and we will reply and solve your doubts or questions promptly. You can choose the one which is with high efficiency and less time and energy invested to get qualified by AZ-220 New Study Guide Questions certification. The AZ-220 New Study Guide Questions practice download pdf offered by Omgzlook can give you some reference. If you want to improve your correct rates of exam, we believe the best method is inscribed according to the fault namely this in appearing weak sports, specific aim ground consolidates knowledge is nodded.
Microsoft Certified: Azure IoT Developer Specialty AZ-220 It is never too late to learn new things.
Microsoft Certified: Azure IoT Developer Specialty AZ-220 New Study Guide Questions - Microsoft Azure IoT Developer Our behavior has been strictly ethical and responsible to you, which is trust worthy. AZ-220 New Dumps exam questions have a very high hit rate, of course, will have a very high pass rate. Before you select a product, you must have made a comparison of your own pass rates.
The Omgzlook’ Microsoft Testing Engine provides an expert help and it is an exclusive offer for those who spend most of their time in searching relevant content in the books. It offers demos free of cost in the form of the free AZ-220 New Study Guide Questions dumps. The Microsoft AZ-220 New Study Guide Questions exam questions aid its customers with updated and comprehensive information in an innovative style.
Microsoft AZ-220 New Study Guide Questions - Their efficiency has far beyond your expectation!
If you try on our AZ-220 New Study Guide Questions exam braindumps, you will be very satisfied with its content and design. Trust me, you can't find anything better than our AZ-220 New Study Guide Questions study materials. If you think I am exaggerating, you can try it for yourself. We can provide you with a free trial version. If you try another version and feel that our AZ-220 New Study Guide Questions practice quiz are not bad, you can apply for another version of the learning materials again and choose the version that suits you best!
It is fast and convenient out of your imagination. Unlike other kinds of exam files which take several days to wait for delivery from the date of making a purchase, our AZ-220 New Study Guide Questions study materials can offer you immediate delivery after you have paid for them.
AZ-220 PDF DEMO:
QUESTION NO: 1
You have an Azure IoT solution that includes an Azure IoT hub.
You receive a root certification authority (CA) certificate from the security department at your company.
You need to configure the IoT hub to use the root CA certificate.
Which four actions should you perform in sequence? To answer, move the appropriate actions from the list of actions to the answer area and arrange them in the correct order.
Answer:
Reference:
https://docs.microsoft.com/bs-latn-ba/azure/iot-hub/iot-hub-security-x509-get-started
QUESTION NO: 2
You have an Azure IoT hub that is being taken from prototype to production.
You plan to connect IoT devices to the IoT hub. The devices have hardware security modules (HSMs).
You need to use the most secure authentication method between the devices and the IoT hub.
Company policy prohibits the use of internally generated certificates.
Which authentication method should you use?
A. a symmetric key
B. An X.509 certificate signed by a root certification authority (CA).
C. an X.509 self-signed certificate
D. a certificate thumbprint
Answer: B
Explanation:
Purchase X.509 certificates from a root certificate authority (CA). This method is recommended for production environments.
The hardware security module, or HSM, is used for secure, hardware-based storage of device secrets, and is the most secure form of secret storage. Both X.509 certificates and SAS tokens can be stored in the HSM Reference:
https://docs.microsoft.com/en-us/azure/iot-dps/concepts-security
QUESTION NO: 3
You have an instance of Azure Time Series Insights and an Azure IoT hub that receives streaming telemetry from IoT devices.
You need to configure Time Series Insights to receive telemetry from the devices.
Which three actions should you perform in sequence? To answer, move the appropriate actions from the list of actions to the answer area and arrange them in the correct order.
Answer:
Explanation:
Step 1: Create a dedicated consumer group..
Add a consumer group to your IoT hub.
Applications use consumer groups to pull data from Azure IoT Hub. To reliably read data from your
IoT hub, provide a dedicated consumer group that's used only by this Time Series Insights environment.
Step 2: Add a new Time Series Insights event source.
Add a new event source
Sign in to the Azure portal.
In the left menu, select All resources. Select your Time Series Insights environment.
Under Settings, select Event Sources, and then select Add.
In the New event source pane, for Event source name, enter a name that's unique to this Time Series
Insights environment. For example, enter event-stream.
Step 3: Configure the Time Series event source to connect to an existing IOT hub Step 4: For Source, select IoT Hub.
Step 5: Select a value for Import option:
If you already have an IoT hub in one of your subscriptions, select Use IoT Hub from available subscriptions. This option is the easiest approach.
Reference:
https://docs.microsoft.com/en-us/azure/time-series-insights/time-series-insights-how-to-add-an- event-source-iothub
QUESTION NO: 4
You need to configure Stream Analytics to meet the POV requirements.
What are two ways to achieve the goal? Each Answer presents a complete solution.
NOTE: Each correct selection is worth one point.
A. Route telemetry to an Azure Blob storage custom endpoint, and then configure the Blob storage as a reference input for Stream Analytics.
B. Create an input in Stream Analytics that uses the built-in events endpoint of IoT Hub as the source.
C. From IoT Hub, create a custom event hub endpoint, and then configure the endpoint as an input to Stream Analytics.
D. Create a Stream Analytics module, and then deploy the module to all IoT Edge devices in the fleet.
Answer: B,C
Explanation:
QUESTION NO: 5
Your company is creating a new camera security system that will use Azure IoT Hub.
You plan to use an Azure IoT Edge device that will run Ubuntu Server 18.04.
You need to configure the IoT Edge device.
Which three actions should you perform in sequence? To answer, move the appropriate actions from the list of actions to the answer area and arrange them in the correct order.
Answer:
Explanation:
Step 1: Run the following commands
Install the container runtime.
Azure IoT Edge relies on an OCI-compatible container runtime. For production scenarios, we recommended that you use the Moby-based engine provided below. The Moby engine is the only container engine officially supported with Azure IoT Edge. Docker CE/EE container images are compatible with the Moby runtime.
Install the Moby engine.
sudo apt-get install moby-engine
Install the Moby command-line interface (CLI). The CLI is useful for development but optional for production deployments.
sudo apt-get install moby-cli
Install the security daemon. The package is installed at /etc/iotedge/.
sudo apt-get install iotedge
Step 2: From IotHub,create an IoT Edge device registry entry.
Note: In your IoT Hub in the Azure portal, IoT Edge devices are created and managed separately from
IOT devices that are not edge enabled.
Sign in to the Azure portal and navigate to your IoT hub.
In the left pane, select IoT Edge from the menu.
Select Add an IoT Edge device.
Provide a descriptive device ID. Use the default settings to auto-generate authentication keys and connect the new device to your hub.
Select Save.
Retrieve the connection string in the Azure portal
1. When you're ready to set up your device, you need the connection string that links your physical device with its identity in the IoT hub.
2. From the IoT Edge page in the portal, click on the device ID from the list of IoT Edge devices.
3. Copy the value of either Primary Connection String or Secondary Connection String.
Step 3: Add the connection string to..
To manually provision a device, you need to provide it with a device connection string that you can create by registering a new device in your IoT hub.
Open the configuration file.
sudo nano /etc/iotedge/config.yaml
Find the provisioning configurations of the file and uncomment the Manual provisioning configuration section. Update the value of device_connection_string with the connection string from your IoT Edge device.
Save and close the file.
After entering the provisioning information in the configuration file, restart the daemon:
sudosystemctl restart iotedge
Reference:
https://docs.microsoft.com/en-us/azure/iot-edge/how-to-install-iot-edge-linux
What's more, according to the development of the time, we will send the updated materials of CWNP CWT-101 test prep to the customers soon if we update the products. Meanwhile, if you want to keep studying this course , you can still enjoy the well-rounded services by Cisco 300-730 test prep, our after-sale services can update your existing Cisco 300-730 study quiz within a year and a discount more than one year. As long as you buy our Dell D-PWF-RDY-A-00 study quiz, you will find that we update it from time to time according to the exam center. Our Network Appliance NS0-604 exam questions can assure you that you will pass the Network Appliance NS0-604 exam as well as getting the related certification under the guidance of our Network Appliance NS0-604 study materials as easy as pie. With our test-oriented Network Appliance NS0-604 test prep in hand, we guarantee that you can pass the Network Appliance NS0-604 exam as easy as blowing away the dust, as long as you guarantee 20 to 30 hours practice with our Network Appliance NS0-604 study materials.
Updated: May 28, 2022