The 70-467 Reliable Study Guide Files learning materials are of high quality, mainly reflected in the adoption rate. As for our 70-467 Reliable Study Guide Files exam question, we guaranteed a higher passing rate than that of other agency. More importantly, we will promptly update our 70-467 Reliable Study Guide Files quiz torrent based on the progress of the letter and send it to you. As you can see, we are selling our 70-467 Reliable Study Guide Files learning guide in the international market, thus there are three different versions of our 70-467 Reliable Study Guide Files exam materials which are prepared to cater the different demands of various people. It is worth mentioning that, the simulation test is available in our software version. Under the help of our 70-467 Reliable Study Guide Files exam questions, the pass rate among our customers has reached as high as 98% to 100%.
Microsoft SQL Server 2012 70-467 And we give some discounts on special festivals.
Microsoft SQL Server 2012 70-467 Reliable Study Guide Files - Designing Business Intelligence Solutions with Microsoft SQL Server On the cutting edge of this line for over ten years, we are trustworthy company you can really count on. Learning knowledge is just like building a house, our Valid Braindumps 70-467 Free training materials serve as making the solid foundation from the start with higher efficiency. Even if this is just the first time you are preparing for the exam, you can expect high grade.
You can just look at the hot hit on our website on the 70-467 Reliable Study Guide Files practice engine, and you will be surprised to find it is very popular and so many warm feedbacks are written by our loyal customers as well. Our 70-467 Reliable Study Guide Files study prep does not need any ads, their quality has propaganda effect themselves. As a result, the pass rate of our 70-467 Reliable Study Guide Files exam braindumps is high as 98% to 100%.
Microsoft 70-467 Reliable Study Guide Files - They will thank you so much.
Get the test 70-467 Reliable Study Guide Files certification is not achieved overnight, we need to invest a lot of time and energy to review, and the review process is less a week or two, more than a month or two, or even half a year, so 70-467 Reliable Study Guide Files exam questions are one of the biggest advantage is that it is the most effective tools for saving time for users. Users do not need to spend too much time on 70-467 Reliable Study Guide Files questions torrent, only need to use their time pieces for efficient learning, the cost is about 20 to 30 hours, users can easily master the test key and difficulties of questions and answers of 70-467 Reliable Study Guide Files prep guide, and in such a short time acquisition of accurate examination skills, better answer out of step, so as to realize high pass the qualification test, has obtained the corresponding qualification certificate.
As long as you encounter obstacles in the learning process on our 70-467 Reliable Study Guide Files training guide, send us an email and we will solve it for you at the first time. Please believe that 70-467 Reliable Study Guide Files learning materials will be your strongest backing from the time you buy our 70-467 Reliable Study Guide Files practice braindumps to the day you pass the exam.
70-467 PDF DEMO:
QUESTION NO: 1
You need to configure Library1 to support the planned self-service reports.
What is the best configuration you should add to Library1? More than one answer choice may achieve the goal. Select the BEST answer.
A. The Report Builder Model content type
B. The PowerPivot Gallery Document content type
C. The Report Builder report content type
D. The Report content type
Answer: C
QUESTION NO: 2
You are the database administrator of a SQL Server 2012 data warehouse implemented as a single database on a production server.
The database is constantly updated by using SQL Server Integration Services (SSIS) packages and SQL
Server Analysis Services (SSAS) cube writeback operations.
The database uses the full recovery model. A backup strategy has been implemented to minimize data loss in the event of hardware failure.
SQL Server Agent jobs have been configured to implement the following backup operations:
* A full database backup every day at 12:00 A.M.
* Differential database backups every day at 6:00 A.M., 12:00 P.M., and 6:00 P.M.
* Transaction log backups every hour on the hour.
At 2:38 P.M. a SSIS package corrupts the data in a fact table. The corruption cannot be undone. You are notified at 3:15 P.M. You immediately take the database offline to prevent further data access and modification.
You need to restore the data warehouse and minimize downtime and data loss.
Which four actions should you perform in sequence? (To answer, move the appropriate actions from the list of actions to the answer area and arrange them in the correct order.
Answer:
Explanation
Box 1:
Box 2:
Box 3:
Box 4:
Note:
* (box 1)
/ For a database using the full or bulk-logged recovery model, in most cases you must back up the tail of the log before restoring the database. Restoring a database without first backing up the tail of the log results in an error, unless the RESTORE DATABASE statement contains either the WITH REPLACE or the WITH STOPAT clause, which must specify a time or transaction that occurred after the end of the data backup.
/ If the database is online and you plan to perform a restore operation on the database, before starting the restore operation, back up the tail of the log using WITH NORECOVERY:
BACKUP LOG database_name TO <backup_device> WITH NORECOVERY
* To restore a database to a specific point in time or transaction, specify the target recovery point in a STOPAT, STOPATMARK, or STOPBEFOREMARK clause.
* (incorrect, box 4): The STOPBEFOREMARK and STOPATMARK options have two parameters, mark_name and lsn_number. The mark_name parameter, which identifies a transaction mark in a log backup, is supported only in RESTORE LOG statements. The lsn_number parameter, which specifies a log sequence number, is supported in both RESTORE DATABASE statements and RESTORE LOG statements.
QUESTION NO: 3
You need to develop a BISM that meets the business requirements for ad-hoc and daily operational analysis.
You must minimize development effort.
Which development approach and mode should you use?
A. Develop a multidimensional project and configure the model with the DirectQuery mode setting off.
B. Develop a tabular project and configure the model with the DirectQuery mode setting on and the project query mode set to DirectQuery.
C. Develop a multidimensional project and configure the cube to use hybrid OLAP (HOLAP) storage mode.
D. Develop a tabular project and configure the model with the DirectQuery mode setting on and the project query mode set to In-Memory with DirectQuery.
Answer: A
Explanation
/ After the upgrade users must be able to perform the following tasks:
/ Ad-hoc analysis of data in the SSAS databases by using the Microsoft Excel PivotTable client (which uses MDX).
/ Daily operational analysis by executing a custom application that uses ADOMD.NET and existing
Multidimensional Expressions (MDX) queries.
/ Deploy a data model to allow the ad-hoc analysis of data. The data model must be cached and source data from an OData feed.
We cannot use DirectQuery mode so C is the only answer that will provide the required caching.
When a model is in DirectQuery mode, it can only be queried by using DAX. You cannot use MDX to create queries. This means that you cannot use the Excel Pivot Client, because Excel uses MDX.
QUESTION NO: 4
You are creating a Multidimensional Expressions (MDX) calculation for Projected Revenue in a cube.
For Customer A, Projected Revenue is defined as 150 percent of the Total Sales for the customer. For all other customers, Projected Revenue is defined as 110 percent of the Total Sales for the customer.
You need to calculate the Projected Revenue as efficiently as possible.
Which calculation should you use? (More than one answer choice may achieve the goal. Select the
BEST answer.)
A. Option B
B. Option A
C. Option D
D. Option C
Answer: D
QUESTION NO: 5
You are designing an extract, transform, load (ETL) process for loading data from a SQL Server database into a large fact table in a data warehouse each day with the prior day's sales data.
The ETL process for the fact table must meet the following requirements:
* Load new data in the shortest possible time.
* Remove data that is more than 36 months old.
* Ensure that data loads correctly.
* Minimize record locking.
* Minimize impact on the transaction log.
You need to design an ETL process that meets the requirements.
What should you do? (More than one answer choice may achieve the goal. Select the BEST answer.)
A. Partition the destination fact table by customer. Use partition switching both to remove old data and to load new data into each partition.
B. Partition the destination fact table by date. Insert new data directly into the fact table and delete old data directly from the fact table.
C. Partition the destination fact table by date. Use partition switching and a staging table to remove old data. Insert new data directly into the fact table.
D. Partition the destination fact table by date. Use partition switching and staging tables both to remove old data and to load new data.
Answer: D
To keep up with the newest regulations of the MuleSoft MCPA-Level-1exam, our experts keep their eyes focusing on it. With the help of our Juniper JN0-252 exam questions, your review process will no longer be full of pressure and anxiety. If you have problems in the process of using our PMI PMP study questions, as long as you contact us anytime and anywhere, we will provide you with remote assistance until that all the problems on our PMI PMP exam braindumps are solved. As our company's flagship product, it has successfully helped countless candidates around the world to obtain the coveted Nutanix NCP-CI-AWS certification. If you want to buy our Cisco 350-401 training engine, you must ensure that you have credit card.
Updated: May 28, 2022