We strive for perfection all these years and get satisfactory results with concerted cooperation between experts, and all questions points in our 70-410 Valid Exam Questions Answers real exam are devised and written base on the real exam. Do not let other 70-410 Valid Exam Questions Answers study dumps mess up your performance or aggravate learning difficulties. The efficiency and accuracy of our 70-410 Valid Exam Questions Answers learning guide will not let you down. Omgzlook Microsoft 70-410 Valid Exam Questions Answers exam dumps are the best reference materials. Omgzlook test questions and answers are the training materials you have been looking for. Although you will take each 70-410 Valid Exam Questions Answers online test one at a time - each one builds upon the previous.
We have the complete list of popular 70-410 Valid Exam Questions Answers exams.
Our IT elite finally designs the best 70-410 - Installing and Configuring Windows Server 2012 Valid Exam Questions Answers exam study materials by collecting the complex questions and analyzing the focal points of the exam over years. In such a way, you will get a leisure study experience as well as a doomed success on your coming New 70-410 Braindumps Ebook exam. After our unremitting efforts, New 70-410 Braindumps Ebook learning guide comes in everybody's expectation.
Every version of 70-410 Valid Exam Questions Answers study materials that we provide to you has its own advantage: the PDF version has no equipment limited, which can be read anywhere; the online version can use on any electronic equipment there is network available; the software version can simulate the real 70-410 Valid Exam Questions Answers exam environment to let you have more real feeling to 70-410 Valid Exam Questions Answers real exam, besides the software version can be available installed on unlimited number devices.
Microsoft 70-410 Valid Exam Questions Answers - Action always speaks louder than words.
If you buy the Software or the APP online version of our 70-410 Valid Exam Questions Answers study materials, you will find that the timer can aid you control the time. Once it is time to submit your exercises, the system of the 70-410 Valid Exam Questions Answers preparation exam will automatically finish your operation. After a several time, you will get used to finish your test on time. If you are satisfied with our 70-410 Valid Exam Questions Answers training guide, come to choose and purchase.
Now, you are fortunate enough to come across our 70-410 Valid Exam Questions Answers exam guide. We have free demos on the website for our customers to download if you still doubt our products, and you can check whether it is the right one for you before purchase as well.
70-410 PDF DEMO:
QUESTION NO: 1
Your network contains a server named Server1 that runs Windows Server 2012 R2. Server1 has the Hyper-V server role installed.
Server1 hosts four virtual machines named VM1, VM2, VM3, and VM4.
Server1 is configured as shown in the following table.
VM2 sends and receives large amounts of data over the network.
You need to ensure that the network traffic of VM2 bypasses the virtual switches of the parent partition.
What should you configure?
A. NUMA topology
B. Resource control
C. resource metering
D. virtual Machine Chimney
E. The VLAN ID
F. Processor Compatibility
G. The startup order
H. Automatic Start Action
I. Integration Services
J. Port mirroring
K. Single-root I/O virtualization
Answer: K
Explanation
Single-root I/O virtualization -capable network adapters can be assigned directly to a virtual machine to maximize network throughput while minimizing network latency and the CPU overhead required for processing network traffic.
References: http://technet.microsoft.com/en-us/library/cc766320(v=ws.10).aspx
http://technet.microsoft.com/en-us/library/hh831410.aspx
Exam Ref 70-410, Installing and Configuring Windows Server 2012 R2, Chapter 3: Configure Hyper-V,
Objective 3.1: Create and Configure virtual machine settings, p.144 Training Guide: Installing and
Configuring Windows Server 2012 R2: Chapter 7: Hyper-V Virtualization, Lesson 2: Deploying and configuring virtual machines, p.335
QUESTION NO: 2
You have a server named Server1 that runs Windows Server 2012 R2. Server1 has the Hyper-V server role installed. Server1 has 8 GB of RAM.
Server1 hosts five virtual machines that run Windows Server 2012 R2.
The settings of a virtual machine named Server3 are configured as shown in the exhibit. (Click the
Exhibit button.)
You need to ensure that when Server1 restarts, Server3 automatically resumes without intervention.
The solution must prevent data loss.
Which settings should you modify?
A. BIOS
B. Automatic Start Action
C. Automatic Stop Action
D. Integration Services
Answer: C
Explanation
The Automatic Stop Action setting should be modified because it will allow you to configure:
"Save the virtual machine state" option instructs Hyper-V Virtual Machine Management Service to save the virtual machine state on the local disk when the Hyper-V Server shuts down.
OR "Turn Off the virtual machine" is used by the Hyper-V Management Service (VMMS.exe) to gracefully turn off the virtual machine.
OR "Shut down the guest operating system" is successful only if the "Hyper-V Shutdown" guest service is running in the virtual machine. The guest service is required to be running in the virtual machine as the Hyper-V VMMS.EXE process will trigger Windows Exit message which is received by the service. Once the message is received by the guest service, it takes the necessary actions to shut down the virtual machine.
Reference: http://www.altaro.com/hyper-v/hyper-v-automatic-start-and-stop-action/
QUESTION NO: 3
You have a Hyper-V host named Server1 that runs Windows Server 2012 R2.
Server1 hosts several virtual machines. Each virtual machine has two network adapters. Server1 contains several virtual switches.
On Server1, you create a NIC team that has two network adapters.
You discover that the NIC team is set to Static Teaming mode.
You need to modify the NIC teaming mode to Switch Independent.
Which cmdlet should you use?
A. Set-VMNetworkAdapter
B. Set-NetLbfoTeam
C. Set-NetLbfoTeamNic
D. Set-VMSwitch
Answer: B
Explanation
The Set-NetLbfoTeam cmdlet sets the TeamingMode or LoadBalancingAlgorithm parameters on the specified NIC team.
Example: Set the teaming mode
This command sets the teaming mode of the team named Team1 to LACP.
Windows PowerShell
PS C:\> Set-NetLbfoTeam -Name Team1 -TeamingMode LACP
Reference: Set-NetLbfoTeam
https://technet.microsoft.com/en-us/library/jj130844(v=wps.630).aspx
QUESTION NO: 4
You work as an administrator at Contoso.com. The Contoso.com network consists of a single domain named Contoso.com.
Contoso.com has a Windows Server 2012 R2 domain controller, named ENSUREPASS-DC01, which has the Domain Naming master and the Schema master roles installed. Contoso.com also has a
Windows Server 2008 R2 domain controller, named ENSUREPASS-DC02, which has the PDC Emulator,
RID master, and Infrastructure master roles installed.
You have deployed a new Windows Server 2012 server, which belongs to a workgroup, in
Contoso.com's perimeter network.
You then executed the djoin.exe command.
Which of the following is the purpose of the djoin.exe command?
A. It sets up a computer account in a domain and requests an offline domain join when a computer restarts.
B. It sets up a user account in a domain and requests an online domain join when a computer restarts.
C. It sets up a computer account in a domain and requests an offline domain join immediately.
D. It sets up a computer account in a domain and requests an online domain join immediately.
Answer: A
QUESTION NO: 5
Your network contains one Active Directory domain named contoso.com. The domain contains
10 domain controllers and a read-only domain controller (RODC) named RODC01.
You plan to replace a domain controller named DC1. DC1 has the schema operations master role.
You need to transfer the schema master role to another domain controller named DC10 before you remove Active Directory from DC1.
Which tool should you use?
A. the ntdsutil command
B. the Set-ADDomain cmdlet
C. the Install-ADDSDomain cmdlet
D. the dsadd command
E. the dsamain command
F. the dsmgmt command
G. the net user command
H. the Set-ADForest cmdlet
Answer: A
Explanation
To transfer the schema master role using the command line:
* Open Command Prompt.
* Type:
ntdsutil
* At the ntdsutil command prompt, type:
roles
* At the fsmo maintenance command prompt, type:
connection
* At the server connections command prompt, type:
connect to serverDomainController
* At the server connections command prompt, type:
quit
* At the fsmo maintenance command prompt, type:
transfer schema master
Reference: Transfer the schema master role
All experts and professors of our company have been trying their best to persist in innovate and developing the VMware 2V0-32.24 test training materials all the time in order to provide the best products for all people and keep competitive in the global market. EMC D-PEXE-IN-A-00 - It is known to us that time is money, and all people hope that they can spend less time on the pass. Autodesk ACP-01101 - We cannot predicate what will happen in the future. It is believed that no one is willing to buy defective products, so, the Huawei H13-323_V1.0 study guide has established a strict quality control system. Our payment system will automatically delete your payment information once you finish paying money for our SAP C-TS462-2023 exam questions.
Updated: May 28, 2022