Our company can promise that the 70-410 Valid Exam Collection Sheet study materials from our company are best among global market. As is known to us, the 70-410 Valid Exam Collection Sheet certification guide from our company is the leading practice materials in this dynamic market. All study materials from our company are designed by a lot of experts and professors. You can save much time and money to do other things what meaningful. You will no longer feel tired because of your studies, if you decide to choose and practice our 70-410 Valid Exam Collection Sheettest answers. Finally, the transfer can be based on the 70-410 Valid Exam Collection Sheet valid practice questions report to develop a learning plan that meets your requirements.
Windows Server 2012 70-410 We can receive numerous warm feedbacks every day.
And we will give you 100% success guaranteed on the 70-410 - Installing and Configuring Windows Server 2012 Valid Exam Collection Sheet training guide. When you want to correct the answer after you finish learning, the correct answer for our Exam 70-410 Prep test prep is below each question, and you can correct it based on the answer. In addition, we design small buttons, which can also show or hide the Exam 70-410 Prep exam torrent, and you can flexibly and freely choose these two modes according to your habit.
Once you choose our learning materials, your dream that you have always been eager to get Microsoft certification which can prove your abilities will realized. You will have more competitive advantages than others to find a job that is decent. We are convinced that our 70-410 Valid Exam Collection Sheet exam questions can help you gain the desired social status and thus embrace success.
But our Microsoft 70-410 Valid Exam Collection Sheet exam questions have made it.
By browsing this website, all there versions of 70-410 Valid Exam Collection Sheet training materials can be chosen according to your taste or preference. In addition, we provide free updates to users for one year long after your purchase. If the user finds anything unclear in the 70-410 Valid Exam Collection Sheet exam questions exam, we will send email to fix it, and our team will answer all of your questions related to the 70-410 Valid Exam Collection Sheet actual exam. So as long as you have any question, just contact us!
Every page is carefully arranged by our experts with clear layout and helpful knowledge to remember. Our 70-410 Valid Exam Collection Sheet exam questions just focus on what is important and help you achieve your goal.
70-410 PDF DEMO:
QUESTION NO: 1
Your network contains an Active Directory domain named contoso.com. The domain contains
100 servers.
The servers are contained in an organizational unit (OU) named Servers OU.
You need to create a group named Group1 on all of the servers in the domain. You must ensure that
Group1 is added only to the servers.
What should you configure?
A. a Local Users and Groups preferences setting in a Group Policy linked to the Domain Controllers
OU
B. a Restricted Groups setting in a Group Policy linked to the domain
C. a Local Users and Groups preferences setting in a Group Policy linked to ServersOU
D. a Restricted Groups setting in a Group Policy linked to Servers OU
Answer: C
Explanation
A. This would add the group to the wrong OU
B. This would affect the whole domain and would effect member of the group
C. allows you to centrally manage local users and groups on domain member computers and is this is the correct OU for the GPO change
D. Restricted Groups defines what member or groups should exist as part of a group Why use Group
Policy preferences?
Unlike Group Policy settings, which App1y to both local computer policy and Active Directory policy,
Group Policy preferences only App1y to Active Directory policy.
You use preferences to configure many areas of the OS, including:
System devices, such as USB ports, floppy drives and removable media Network shares and mapping network shares to drive letters System and user environment variables User and group accounts for the local computer VPN and dial-up networking connections Printer configuration and mapping
Registry settings, schedule tasks and system services Settings for Folder Options, Internet Options and Regional and Language Options Settings for power schemes and power management Start Menu properties and menu items
QUESTION NO: 2
You have three servers named Server1, Server2, and DC1 that run Windows Server 2012 R2.
IPv6 addresses and configurations are assigned to all of the servers by using DHCPv6.
The IPv6 routing on Server1 is shown in the following table.
You verify that Server2 can ping the IPv6 address of DC1.
You need to ensure that Server1 can ping the IPv6 address of DC1.
What command should you run on Server1? (To answer, select the appropriate options in the answer area.)
Answer:
Explanation
Before a routing table is used, the destination cache is checked for an entry matching the destination address in the packet being forwarded. If the destination cache does not contain an entry for the destination address, the routing table is used to determine:
The next-hop address - For a direct delivery (in which the destination is on a local link), the next-hop address is the destination address in the packet. For an indirect delivery (in which the destination is not on a local link), the next-hop address is the address of a router.
The next-hop interface - The interface identifies the physical or logical interface that is used to forward the packet either to its destination or to the next router.
Reference: http://technet.microsoft.com/en-us/library/dd379520%28v=WS.10%29.aspx
QUESTION NO: 3
Your network contains an Active Directory domain named contoso.com. The domain contains a server named Server1. Server1 runs Windows Server 2012 R2.
You need to create a 3-TB virtual hard disk (VHD) on Server1.
Which tool should you use?
A. Computer Management
B. Server Manager
C. Share and Storage Management
D. New-VirtualDisk
Answer: A
Explanation
For other questions to create a VHD (file) you can use computer management.
- Share and storage management (2008 only)
- New-storagesubsystemVirtualDisk (this is a virtual disk, NOT a virtual hard disk)
- Server Manager (you would use this to create virtual disks, not virtual hard disks)
QUESTION NO: 4
In an isolated test environment, you deploy a server named Server1 that runs a Server Core
Installation of Windows Server 2012 R2. The test environment does not have Active Directory
Domain Services (AD DS) installed.
You install the Active Directory Domain Services server role on Server1.
You need to configure Server1 as a domain controller.
Which cmdlet should you run?
A. Install-ADDSDomainController
B. Install-ADDSDomain
C. Install-ADDSForest
D. Install-WindowsFeature
Answer: C
Explanation
Install-ADDSDomainController - Installs a domain controller in Active Directory.
Install-ADDSDomain - Installs a new Active Directory domain configuration.
Install-ADDSForest - Installs a new Active Directory forest configuration.
Install-WindowsFeature - Installs one or more Windows Server roles, role services, or features on either the local or a specified remote server that is running Windows Server 2012 R2. This cmdlet is equivalent to and replaces Add-WindowsFeature, the cmdlet that was used to install roles, role services, and features.
C:\PS>Install-ADDSForest -DomainName corp.contoso.com -CreateDNSDelegation DomainMode
Win2008 - ForestMode Win 2008 R2 -DatabasePath "d:\NTDS" -SysvolPath "d:\SYSVOL" -LogPath
"e:\Logs"Installs a new forest named corp.contoso.com, creates a DNS delegation in the contoso.com domain, sets domain functional level to Windows Server 2008 R2 and sets forest functional level to
Windows Server 2008,installs the Active Directory database and SYSVOL on the D:\ drive, installs the log files on the E:\ drive and has the server automatically restart after AD DS installation is complete and prompts the user to provide and confirm the Directory Services Restore Mode (DSRM) password.
QUESTION NO: 5
Your network contains an Active Directory domain named contoso.com. The domain contains
500 servers that run Windows Server 2012 R2.
You have a written security policy that states the following:
* Only required ports must be open on the servers.
* All of the servers must have Windows Firewall enabled.
* Client computers used by administrators must be allowed to access all of the ports on all of the servers.
* Client computers used by the administrators must be authenticated before the client computers can access the servers.
You have a client computer named Computer1 that runs Windows 8.
You need to ensure that you can use Computer1 to access all of the ports on all of the servers successfully. The solution must adhere to the security policy.
Which three actions should you perform? (Each correct answer presents part of the solution. Choose three.)
A. On Computer1, create a connection security rule.
B. On all of the servers, create an outbound rule and select the Allow the connection if it is secure option.
C. On all of the servers, create an inbound rule and select the Allow the connection if it is secure option.
D. On Computer1, create an inbound rule and select the Allow the connection if it is secure option.
E. On Computer1, create an outbound rule and select the Allow the connection if it is secure option.
F. On all of the servers, create a connection security rule.
Answer: A C F
Explanation
Unlike firewall rules, which operate unilaterally, connection security rules require that both communicating computers have a policy with connection security rules or another compatible IPsec policy.
Traffic that matches a firewall rule that uses the Allow connection if it is secure setting bypasses
Windows Firewall. The rule can filter the traffic by IP address, port, or protocol. This method is supported on Windows Vista or Windows Server 2008.
References:
http://technet.microsoft.com/en-us/library/cc772017.aspx
http://technet.microsoft.com/en-us/library/cc753463.aspx
You can just look at the data about the hot hit on the EMC D-PCR-DY-23 study braindumps everyday, and you will know that how popular our EMC D-PCR-DY-23 learning guide is. So our EMC D-MN-OE-23practice materials have great brand awareness in the market. The promotion or acceptance of our SAP C-CPE-16 exam questions will be easy. Our Linux Foundation FOCP study questions have simplified the complicated notions and add the instances, the stimulation and the diagrams to explain any hard-to-explain contents. The services provided by our EMC D-PWF-DS-23 test questions are quite specific and comprehensive.
Updated: May 28, 2022