We know the certificate of 70-410 Reliable Study Guide Ppt exam guide is useful and your prospective employer wants to see that you can do the job with strong prove, so our 70-410 Reliable Study Guide Ppt study materials could be your opportunity. Our 70-410 Reliable Study Guide Ppt practice dumps are sensational from the time they are published for the importance of 70-410 Reliable Study Guide Ppt exam as well as the efficiency of our 70-410 Reliable Study Guide Ppt training engine. And we can help you get success and satisfy your eager for the certificate. With so many methods can boost individual competitiveness, people may be confused, which can really bring them a glamorous work or brighter future? We are here to tell you that a 70-410 Reliable Study Guide Ppt certification definitively has everything to gain and nothing to lose for everyone. As everybody knows, competitions appear ubiquitously in current society. Before getting ready for your exam, having the ability to choose the best 70-410 Reliable Study Guide Ppt practice materials is the manifestation of wisdom.
70-410 Reliable Study Guide Ppt had a deeper impact on our work.
Windows Server 2012 70-410 Reliable Study Guide Ppt - Installing and Configuring Windows Server 2012 Our product boosts many advantages and it is worthy for you to buy it. However, the exam is very difficult for a lot of people. Especially if you do not choose the correct study materials and find a suitable way, it will be more difficult for you to pass the exam and get the New 70-410 Exam Forum related certification.
Our 70-410 Reliable Study Guide Ppt test questions will help customers learn the important knowledge about exam. If you buy our products, it will be very easy for you to have the mastery of a core set of knowledge in the shortest time, at the same time, our 70-410 Reliable Study Guide Ppt test torrent can help you avoid falling into rote learning habits. You just need to spend 20 to 30 hours on study, and then you can take your exam.
Microsoft 70-410 Reliable Study Guide Ppt - So you can take a best preparation for the exam.
Every detail of our 70-410 Reliable Study Guide Ppt exam guide is going through professional evaluation and test. Other workers are also dedicated to their jobs. Even the proofreading works of the 70-410 Reliable Study Guide Ppt study materials are complex and difficult. They still attentively accomplish their tasks. Please have a try and give us an opportunity. Our 70-410 Reliable Study Guide Ppt preparation quide will totally amaze you and bring you good luck. And it deserves you to have a try!
Omgzlook's training tool has strong pertinence, which can help you save a lot of valuable time and energy to pass IT certification exam. Our exercises and answers and are very close true examination questions.
70-410 PDF DEMO:
QUESTION NO: 1
Your network contains a file server named Server1 that runs Windows Server 2012 R2. All client computers run Windows 8. Server1 contains a folder named Folder1. Folder1 contains the installation files for the company's desktop applications. A network technician shares Folder1 as
Share 1.
You need to ensure that the share for Folder1 is not visible when users browse the network.
What should you do?
A. From the properties of Folder1, deny the List Folder Contents permission for the Everyone group.
B. From the properties of Folder1, remove Share1, and then share Folder1 as Share1$.
C. From the properties of Folder1, configure the hidden attribute.
D. From the properties of Share1, configure access-based enumeration
Answer: B
QUESTION NO: 2
You have a server named Server1 that runs Windows Server 2012 R2. Server1 has the Hyper-V server role installed. Server1 has 8 GB of RAM.
Server1 hosts five virtual machines that run Windows Server 2012 R2.
The settings of a virtual machine named Server3 are configured as shown in the exhibit. (Click the
Exhibit button.)
You need to ensure that when Server1 restarts, Server3 automatically resumes without intervention.
The solution must prevent data loss.
Which settings should you modify?
A. BIOS
B. Automatic Start Action
C. Automatic Stop Action
D. Integration Services
Answer: C
Explanation
The Automatic Stop Action setting should be modified because it will allow you to configure:
"Save the virtual machine state" option instructs Hyper-V Virtual Machine Management Service to save the virtual machine state on the local disk when the Hyper-V Server shuts down.
OR "Turn Off the virtual machine" is used by the Hyper-V Management Service (VMMS.exe) to gracefully turn off the virtual machine.
OR "Shut down the guest operating system" is successful only if the "Hyper-V Shutdown" guest service is running in the virtual machine. The guest service is required to be running in the virtual machine as the Hyper-V VMMS.EXE process will trigger Windows Exit message which is received by the service. Once the message is received by the guest service, it takes the necessary actions to shut down the virtual machine.
Reference: http://www.altaro.com/hyper-v/hyper-v-automatic-start-and-stop-action/
QUESTION NO: 3
Your network contains a server named Server1 that runs Windows Server 2012 R2. Server1 has the Hyper-V server role installed.
Server1 hosts four virtual machines named VM1, VM2, VM3, and VM4.
Server1 is configured as shown in the following table.
VM2 sends and receives large amounts of data over the network.
You need to ensure that the network traffic of VM2 bypasses the virtual switches of the parent partition.
What should you configure?
A. NUMA topology
B. Resource control
C. resource metering
D. virtual Machine Chimney
E. The VLAN ID
F. Processor Compatibility
G. The startup order
H. Automatic Start Action
I. Integration Services
J. Port mirroring
K. Single-root I/O virtualization
Answer: K
Explanation
Single-root I/O virtualization -capable network adapters can be assigned directly to a virtual machine to maximize network throughput while minimizing network latency and the CPU overhead required for processing network traffic.
References: http://technet.microsoft.com/en-us/library/cc766320(v=ws.10).aspx
http://technet.microsoft.com/en-us/library/hh831410.aspx
Exam Ref 70-410, Installing and Configuring Windows Server 2012 R2, Chapter 3: Configure Hyper-V,
Objective 3.1: Create and Configure virtual machine settings, p.144 Training Guide: Installing and
Configuring Windows Server 2012 R2: Chapter 7: Hyper-V Virtualization, Lesson 2: Deploying and configuring virtual machines, p.335
QUESTION NO: 4
You have a Hyper-V host named Server1 that runs Windows Server 2012 R2.
Server1 hosts several virtual machines. Each virtual machine has two network adapters. Server1 contains several virtual switches.
On Server1, you create a NIC team that has two network adapters.
You discover that the NIC team is set to Static Teaming mode.
You need to modify the NIC teaming mode to Switch Independent.
Which cmdlet should you use?
A. Set-VMNetworkAdapter
B. Set-NetLbfoTeam
C. Set-NetLbfoTeamNic
D. Set-VMSwitch
Answer: B
Explanation
The Set-NetLbfoTeam cmdlet sets the TeamingMode or LoadBalancingAlgorithm parameters on the specified NIC team.
Example: Set the teaming mode
This command sets the teaming mode of the team named Team1 to LACP.
Windows PowerShell
PS C:\> Set-NetLbfoTeam -Name Team1 -TeamingMode LACP
Reference: Set-NetLbfoTeam
https://technet.microsoft.com/en-us/library/jj130844(v=wps.630).aspx
QUESTION NO: 5
You work as an administrator at Contoso.com. The Contoso.com network consists of a single domain named Contoso.com.
Contoso.com has a Windows Server 2012 R2 domain controller, named ENSUREPASS-DC01, which has the Domain Naming master and the Schema master roles installed. Contoso.com also has a
Windows Server 2008 R2 domain controller, named ENSUREPASS-DC02, which has the PDC Emulator,
RID master, and Infrastructure master roles installed.
You have deployed a new Windows Server 2012 server, which belongs to a workgroup, in
Contoso.com's perimeter network.
You then executed the djoin.exe command.
Which of the following is the purpose of the djoin.exe command?
A. It sets up a computer account in a domain and requests an offline domain join when a computer restarts.
B. It sets up a user account in a domain and requests an online domain join when a computer restarts.
C. It sets up a computer account in a domain and requests an offline domain join immediately.
D. It sets up a computer account in a domain and requests an online domain join immediately.
Answer: A
Our SAP C-THR96-2405 study materials absolutely can add more pleasure to your life. Fortinet NSE7_LED-7.0 - These training products to help you pass the exam, we guarantee to refund the full purchase cost. If you attach great importance to the protection of personal information and want to choose a very high security product, EMC D-PSC-MN-01 real exam is definitely your first choice. Some of the test data on the site is free, but more importantly is that it provides a realistic simulation exercises that can help you to pass the Microsoft SAP C_HRHFC_2405 exam. Cisco 500-490 - Each of us is dreaming of being the best, but only a few people take that crucial step.
Updated: May 28, 2022