Our 70-410 New Test Camp Materials study braindumps are so popular in the market and among the candidates that is because that not only our 70-410 New Test Camp Materials learning guide has high quality, but also our 70-410 New Test Camp Materials practice quiz is priced reasonably, so we do not overcharge you at all. Meanwhile, our exam materials are demonstrably high effective to help you get the essence of the knowledge which was convoluted. As long as you study with our 70-410 New Test Camp Materials exam questions for 20 to 30 hours, you will pass the exam for sure. Because all questions in the actual test are included in Omgzlook practice test dumps which provide you with the adequate explanation that let you understand these questions well. As long as you master these questions and answers, you will sail through the exam you want to attend. If you are accustomed to using the printed version of the material, we have a PDF version of the 70-410 New Test Camp Materials study tool for you to download and print, so that you can view the learning materials as long as you have free time.
Windows Server 2012 70-410 Omgzlook will never disappoint you.
Windows Server 2012 70-410 New Test Camp Materials - Installing and Configuring Windows Server 2012 APP version can not only simulate the real test scene but also point out your mistakes and notice you to practice many times. So you have nothing to worry about, only to study with our Reliable 70-410 Test Collection Free exam questions with full attention. And as we have been in this career for over ten years, our Reliable 70-410 Test Collection Free learning materials have became famous as a pass guarantee.
Omgzlook will help you with its valid and high quality 70-410 New Test Camp Materials prep torrent. 70-410 New Test Camp Materials questions & answers are compiled by our senior experts who with rich experience. Besides, we check the update about 70-410 New Test Camp Materials training pdf every day.
Microsoft 70-410 New Test Camp Materials - .
If you want to through the Microsoft 70-410 New Test Camp Materials certification exam to make a stronger position in today's competitive IT industry, then you need the strong expertise knowledge and the accumulated efforts. And pass the Microsoft 70-410 New Test Camp Materials exam is not easy. Perhaps through Microsoft 70-410 New Test Camp Materials exam you can promote yourself to the IT industry. But it is not necessary to spend a lot of time and effort to learn the expertise. You can choose Omgzlook's Microsoft 70-410 New Test Camp Materials exam training materials. This is training product that specifically made for IT exam. With it you can pass the difficult Microsoft 70-410 New Test Camp Materials exam effortlessly.
You never know what you can get till you try. It is universally acknowledged that mock examination is of great significance for those who are preparing for the exam since candidates can find deficiencies of their knowledge as well as their shortcomings in the practice test, so that they can enrich their knowledge before the real 70-410 New Test Camp Materials exam.
70-410 PDF DEMO:
QUESTION NO: 1
Your network contains a file server named Server1 that runs Windows Server 2012 R2. All client computers run Windows 8. Server1 contains a folder named Folder1. Folder1 contains the installation files for the company's desktop applications. A network technician shares Folder1 as
Share 1.
You need to ensure that the share for Folder1 is not visible when users browse the network.
What should you do?
A. From the properties of Folder1, deny the List Folder Contents permission for the Everyone group.
B. From the properties of Folder1, remove Share1, and then share Folder1 as Share1$.
C. From the properties of Folder1, configure the hidden attribute.
D. From the properties of Share1, configure access-based enumeration
Answer: B
QUESTION NO: 2
You have a server named Server1 that runs Windows Server 2012 R2. Server1 has the Hyper-V server role installed. Server1 has 8 GB of RAM.
Server1 hosts five virtual machines that run Windows Server 2012 R2.
The settings of a virtual machine named Server3 are configured as shown in the exhibit. (Click the
Exhibit button.)
You need to ensure that when Server1 restarts, Server3 automatically resumes without intervention.
The solution must prevent data loss.
Which settings should you modify?
A. BIOS
B. Automatic Start Action
C. Automatic Stop Action
D. Integration Services
Answer: C
Explanation
The Automatic Stop Action setting should be modified because it will allow you to configure:
"Save the virtual machine state" option instructs Hyper-V Virtual Machine Management Service to save the virtual machine state on the local disk when the Hyper-V Server shuts down.
OR "Turn Off the virtual machine" is used by the Hyper-V Management Service (VMMS.exe) to gracefully turn off the virtual machine.
OR "Shut down the guest operating system" is successful only if the "Hyper-V Shutdown" guest service is running in the virtual machine. The guest service is required to be running in the virtual machine as the Hyper-V VMMS.EXE process will trigger Windows Exit message which is received by the service. Once the message is received by the guest service, it takes the necessary actions to shut down the virtual machine.
Reference: http://www.altaro.com/hyper-v/hyper-v-automatic-start-and-stop-action/
QUESTION NO: 3
Your network contains a server named Server1 that runs Windows Server 2012 R2. Server1 has the Hyper-V server role installed.
Server1 hosts four virtual machines named VM1, VM2, VM3, and VM4.
Server1 is configured as shown in the following table.
VM2 sends and receives large amounts of data over the network.
You need to ensure that the network traffic of VM2 bypasses the virtual switches of the parent partition.
What should you configure?
A. NUMA topology
B. Resource control
C. resource metering
D. virtual Machine Chimney
E. The VLAN ID
F. Processor Compatibility
G. The startup order
H. Automatic Start Action
I. Integration Services
J. Port mirroring
K. Single-root I/O virtualization
Answer: K
Explanation
Single-root I/O virtualization -capable network adapters can be assigned directly to a virtual machine to maximize network throughput while minimizing network latency and the CPU overhead required for processing network traffic.
References: http://technet.microsoft.com/en-us/library/cc766320(v=ws.10).aspx
http://technet.microsoft.com/en-us/library/hh831410.aspx
Exam Ref 70-410, Installing and Configuring Windows Server 2012 R2, Chapter 3: Configure Hyper-V,
Objective 3.1: Create and Configure virtual machine settings, p.144 Training Guide: Installing and
Configuring Windows Server 2012 R2: Chapter 7: Hyper-V Virtualization, Lesson 2: Deploying and configuring virtual machines, p.335
QUESTION NO: 4
You have a Hyper-V host named Server1 that runs Windows Server 2012 R2.
Server1 hosts several virtual machines. Each virtual machine has two network adapters. Server1 contains several virtual switches.
On Server1, you create a NIC team that has two network adapters.
You discover that the NIC team is set to Static Teaming mode.
You need to modify the NIC teaming mode to Switch Independent.
Which cmdlet should you use?
A. Set-VMNetworkAdapter
B. Set-NetLbfoTeam
C. Set-NetLbfoTeamNic
D. Set-VMSwitch
Answer: B
Explanation
The Set-NetLbfoTeam cmdlet sets the TeamingMode or LoadBalancingAlgorithm parameters on the specified NIC team.
Example: Set the teaming mode
This command sets the teaming mode of the team named Team1 to LACP.
Windows PowerShell
PS C:\> Set-NetLbfoTeam -Name Team1 -TeamingMode LACP
Reference: Set-NetLbfoTeam
https://technet.microsoft.com/en-us/library/jj130844(v=wps.630).aspx
QUESTION NO: 5
You work as an administrator at Contoso.com. The Contoso.com network consists of a single domain named Contoso.com.
Contoso.com has a Windows Server 2012 R2 domain controller, named ENSUREPASS-DC01, which has the Domain Naming master and the Schema master roles installed. Contoso.com also has a
Windows Server 2008 R2 domain controller, named ENSUREPASS-DC02, which has the PDC Emulator,
RID master, and Infrastructure master roles installed.
You have deployed a new Windows Server 2012 server, which belongs to a workgroup, in
Contoso.com's perimeter network.
You then executed the djoin.exe command.
Which of the following is the purpose of the djoin.exe command?
A. It sets up a computer account in a domain and requests an offline domain join when a computer restarts.
B. It sets up a user account in a domain and requests an online domain join when a computer restarts.
C. It sets up a computer account in a domain and requests an offline domain join immediately.
D. It sets up a computer account in a domain and requests an online domain join immediately.
Answer: A
WGU Organizational-Behaviors-and-Leadership - But God forced me to keep moving. Juniper JN0-223 - We will tailor services to different individuals and help them take part in their aimed exams after only 20-30 hours practice and training. IAPP CIPT - Most candidates are preparing for IT certification exam while they working, which is a painstaking, laborious process. So many our customers have benefited form our SAP C_THR70_2404 preparation quiz, so will you! EMC D-VXR-DY-01 - These real questions and answers can lead to some really great things.
Updated: May 28, 2022