Our questions and answers are based on the real exam and conform to the popular trend in the industry. You only need 20-30 hours to learn Redhat Certified Technician on Redhat Enterprise Linux 5 (Labs) exam torrent and prepare the exam. Many people, especially the in-service staff, are busy in their jobs, learning, family lives and other important things and have little time and energy to learn and prepare the exam. Our latest training material about RedHat certification RH-202 Test Dumps Sheet exam is developed by Omgzlook's professional team's constantly study the outline. It can help a lot of people achieve their dream. To some extent, these RH-202 Test Dumps Sheet certificates may determine your future.
Red Hat Certification RH-202 A bold attempt is half success.
We can make sure that all employees in our company have wide experience and advanced technologies in designing the RH-202 - Redhat Certified Technician on Redhat Enterprise Linux 5 (Labs) Test Dumps Sheet study dump. Using Valid Dumps RH-202 Book real questions will not only help you clear exam with less time and money but also bring you a bright future. We are looking forward to your join.
Our RH-202 Test Dumps Sheet study materials can have such a high pass rate, and it is the result of step by step that all members uphold the concept of customer first. If you use a trial version of RH-202 Test Dumps Sheet training prep, you can find that our study materials have such a high passing rate and so many users support it. After using the trial version, we believe that you will be willing to choose RH-202 Test Dumps Sheet exam questions.
RedHat RH-202 Test Dumps Sheet - So you can take a best preparation for the exam.
Every detail of our RH-202 Test Dumps Sheet exam guide is going through professional evaluation and test. Other workers are also dedicated to their jobs. Even the proofreading works of the RH-202 Test Dumps Sheet study materials are complex and difficult. They still attentively accomplish their tasks. Please have a try and give us an opportunity. Our RH-202 Test Dumps Sheet preparation quide will totally amaze you and bring you good luck. And it deserves you to have a try!
Omgzlook's training tool has strong pertinence, which can help you save a lot of valuable time and energy to pass IT certification exam. Our exercises and answers and are very close true examination questions.
RH-202 PDF DEMO:
QUESTION NO: 1
free -m Verify Either Swap is enabled or not.
QUESTION NO: 2
swapon /dev/hda? To enable the Swap space from partition.
QUESTION NO: 3
mkswap /dev/hda? To create Swap File system on partition.
QUESTION NO: 4
vi /etc/fstab /dev/hda? swap swap defaults 0 0
QUESTION NO: 5
Verify by mounting on current Sessions also:
mount /dev/hda? /data
5. You are new System Administrator and from now you are going to handle the system and your main task is Network monitoring, Backup and Restore. But you don't know the root password. Change the root password to redhat and login in default Runlevel.
Answer and Explanation:
When you Boot the System, it starts on default Runlevel specified in /etc/inittab: Id:?:initdefault:
When System Successfully boot, it will ask for username and password. But you don't know the root's password. To change the root password you need to boot the system into single user mode. You can pass the kernel arguments from the boot loader.
1. Restart the System.
2. You will get the boot loader GRUB screen.
3. Press a and type 1 or s for single mode ro root=LABEL=/ rhgb queit s
4. System will boot on Single User mode.
5. Use passwd command to change.
6. Press ctrl+d
6. There are more then 400 Computers in your Office. You are appointed as a System Administrator. But you don't have Router. So, you are going to use your One Linux Server as a Router. How will you enable
IP packets forward?
Answer and Explanation:
1. /proc is the virtual filesystem, we use /proc to modify the kernel parameters at running time.
# echo "1" >/proc/sys/net/ipv4/ip_forward
2. /etc/sysctl.conf when System Reboot on next time, /etc/rc.d/rc.sysinit scripts reads the file
/etc/sysctl.conf. To enable the IP forwarding on next reboot also you need to set the parameter. net.ipv4.ip_forward=1
Here 0 means disable, 1 means enable.
7. You Completely Install the Redhat Enterprise Linux ES 4 on your System. While start the system, it's giving error to load X window System. How will you fix that problem and make boot successfully run X
Window System.
Answer and Explanation:
Think while Problems occurred on booting System on Runlevel 5 (X Window).
1. /tmp is full or not
2. Quota is already reached
3. Video card or resolution or monitor is misconfigured.
4. xfs service is running or not.
Do These:
1. df -h /tmp /tmp is full remove the unnecessary file
2. quota username if quota is already reached remove unnecessary file from home directory.
3. Boot the System in runlevel 3. you can pass the Kernel Argument from boot loader.
4. Use command: system-config-display It will display a dialog to configure the monitor, Video card, resolution etc.
5. Set the Default Runlevel 5 in /etc/inittab id:5:initdefault:
6. Reboot the System you will get the GUI login Screen.
8. There are two different networks, 192.168.0.0/24 and 192.168.1.0/24. Your System is in 192.168.0.0/24
Network. One RHEL 4 Installed System is going to use as a Router. All required configuration is already done on Linux Server. Where 192.168.0.254 and 192.168.1.254 IP Address are assigned on that Server.
How will make successfully ping to 192.168.1.0/24 Network's Host?
Answer:
1. vi /etc/sysconfig/network
GATEWAY=192.168.0.254
OR
vi /etc/sysconf/network-scripts/ifcfg-eth0
DEVICE=eth0
BOOTPROTO=static
ONBOOT=yes
IPADDR=192.168.0.?
NETMASK=255.255.255.0
GATEWAY=192.168.0.254
2. service network restart
Explanation: Gateway defines the way to exit the packets. According to question System working as a router for two networks have IP Address 192.168.0.254 and 192.168.1.254. To get the hosts on
192.168.1.0/24 should go through 192.168.0.254.
9. Make a swap partition having 100MB. Make Automatically Usable at System Boot Time.
Answer and Explanation:
1. Use fdisk /dev/hda To create new partition.
2. Type n For New partition
3. It will ask for Logical or Primary Partitions. Press l for logical.
4. It will ask for the Starting Cylinder: Use the Default by pressing Enter Key.
5. Type the Size: +100M You can Specify either Last cylinder of Size here.
6. Press P to verify the partitions lists and remember the partitions name.
Default System ID is 83 that means Linux Native.
7. Type t to change the System ID of partition.
8. Type Partition Number
9. Type 82 that means Linux Swap.
10. Press w to write on partitions table.
11. Either Reboot or use partprobe command.
Our CIW 1D0-671 study materials absolutely can add more pleasure to your life. SAP C_S4CPB_2408 - If these training products do not help you pass the exam, we guarantee to refund the full purchase cost. If you attach great importance to the protection of personal information and want to choose a very high security product, Microsoft MB-230 real exam is definitely your first choice. SAP C_S4CS_2408 - So you have no reason not to choose it. Huawei H12-621_V1.0 - Each of us is dreaming of being the best, but only a few people take that crucial step.
Updated: May 27, 2022