The operating system of RH-202 Reliable Exam Test exam practice has won the appreciation of many users around the world. Within five to ten minutes after your payment is successful, our operating system will send a link to RH-202 Reliable Exam Test training materials to your email address. After our RH-202 Reliable Exam Test study guide update, our operating system will also send you a timely message to ensure that you will not miss a single message. Their efficiency has far beyond your expectation! With our RH-202 Reliable Exam Test practice materials, and your persistence towards success, you can be optimistic about your RH-202 Reliable Exam Test real dumps. If you try on our RH-202 Reliable Exam Test exam braindumps, you will be very satisfied with its content and design.
Red Hat Certification RH-202 No company in the field can surpass us.
With high-quality RH-202 - Redhat Certified Technician on Redhat Enterprise Linux 5 (Labs) Reliable Exam Test guide materials and flexible choices of learning mode, they would bring about the convenience and easiness for you. Because, after all, Exam Questions And Answers RH-202 Fee is a very important certified exam of RedHat. But Exam Questions And Answers RH-202 Fee exam is not so simple.
Our RH-202 Reliable Exam Test learning materials are just staring points for exam candidates, and you may meet several challenging tasks or exams in the future about computer knowledge, we can still offer help. Need any help, please contact with us again! All time and energy you devoted to the RH-202 Reliable Exam Test preparation quiz is worthwhile.
RedHat RH-202 Reliable Exam Test - It can help a lot of people achieve their dream.
In this social-cultural environment, the RH-202 Reliable Exam Test certificates mean a lot especially for exam candidates like you. To some extent, these RH-202 Reliable Exam Test certificates may determine your future. With respect to your worries about the practice exam, we recommend our RH-202 Reliable Exam Test preparation materials which have a strong bearing on the outcomes dramatically. For a better understanding of their features, please follow our website and try on them.
There a galaxy of talents in the 21st century, but professional IT talents not so many. Society need a large number of professional IT talents.
RH-202 PDF DEMO:
QUESTION NO: 1
Use mkfs -t ext3 /dev/hda?
Or
mke2fs -j /dev/hda? To create ext3 filesystem.
QUESTION NO: 2
vi /etc/fstab
Write:
/dev/hda? /data ext3 defaults 1 2
QUESTION NO: 3
Either Reboot or use partprobe command.
QUESTION NO: 4
Verify by mounting on current Sessions also:
mount /dev/hda? /data
5. You are new System Administrator and from now you are going to handle the system and your main task is Network monitoring, Backup and Restore. But you don't know the root password. Change the root password to redhat and login in default Runlevel.
Answer and Explanation:
When you Boot the System, it starts on default Runlevel specified in /etc/inittab: Id:?:initdefault:
When System Successfully boot, it will ask for username and password. But you don't know the root's password. To change the root password you need to boot the system into single user mode. You can pass the kernel arguments from the boot loader.
1. Restart the System.
2. You will get the boot loader GRUB screen.
3. Press a and type 1 or s for single mode ro root=LABEL=/ rhgb queit s
4. System will boot on Single User mode.
5. Use passwd command to change.
6. Press ctrl+d
6. There are more then 400 Computers in your Office. You are appointed as a System Administrator. But you don't have Router. So, you are going to use your One Linux Server as a Router. How will you enable
IP packets forward?
Answer and Explanation:
1. /proc is the virtual filesystem, we use /proc to modify the kernel parameters at running time.
# echo "1" >/proc/sys/net/ipv4/ip_forward
2. /etc/sysctl.conf when System Reboot on next time, /etc/rc.d/rc.sysinit scripts reads the file
/etc/sysctl.conf. To enable the IP forwarding on next reboot also you need to set the parameter. net.ipv4.ip_forward=1
Here 0 means disable, 1 means enable.
7. You Completely Install the Redhat Enterprise Linux ES 4 on your System. While start the system, it's giving error to load X window System. How will you fix that problem and make boot successfully run X
Window System.
Answer and Explanation:
Think while Problems occurred on booting System on Runlevel 5 (X Window).
1. /tmp is full or not
2. Quota is already reached
3. Video card or resolution or monitor is misconfigured.
4. xfs service is running or not.
Do These:
1. df -h /tmp /tmp is full remove the unnecessary file
2. quota username if quota is already reached remove unnecessary file from home directory.
3. Boot the System in runlevel 3. you can pass the Kernel Argument from boot loader.
4. Use command: system-config-display It will display a dialog to configure the monitor, Video card, resolution etc.
5. Set the Default Runlevel 5 in /etc/inittab id:5:initdefault:
6. Reboot the System you will get the GUI login Screen.
8. There are two different networks, 192.168.0.0/24 and 192.168.1.0/24. Your System is in 192.168.0.0/24
Network. One RHEL 4 Installed System is going to use as a Router. All required configuration is already done on Linux Server. Where 192.168.0.254 and 192.168.1.254 IP Address are assigned on that Server.
How will make successfully ping to 192.168.1.0/24 Network's Host?
Answer:
1. vi /etc/sysconfig/network
GATEWAY=192.168.0.254
OR
vi /etc/sysconf/network-scripts/ifcfg-eth0
DEVICE=eth0
BOOTPROTO=static
ONBOOT=yes
IPADDR=192.168.0.?
NETMASK=255.255.255.0
GATEWAY=192.168.0.254
2. service network restart
Explanation: Gateway defines the way to exit the packets. According to question System working as a router for two networks have IP Address 192.168.0.254 and 192.168.1.254. To get the hosts on
192.168.1.0/24 should go through 192.168.0.254.
9. Make a swap partition having 100MB. Make Automatically Usable at System Boot Time.
Answer and Explanation:
1. Use fdisk /dev/hda To create new partition.
2. Type n For New partition
3. It will ask for Logical or Primary Partitions. Press l for logical.
4. It will ask for the Starting Cylinder: Use the Default by pressing Enter Key.
5. Type the Size: +100M You can Specify either Last cylinder of Size here.
6. Press P to verify the partitions lists and remember the partitions name.
Default System ID is 83 that means Linux Native.
7. Type t to change the System ID of partition.
8. Type Partition Number
9. Type 82 that means Linux Swap.
10. Press w to write on partitions table.
11. Either Reboot or use partprobe command.
QUESTION NO: 5
Press w to write on partitions table.
Besides, we are punctually meeting commitments to offer help on HP HPE2-T37 study materials. More and more people choose RedHat Nutanix NCSE-Core exam. If you require any further information about either our SAP C-HRHPC-2405 preparation exam or our corporation, please do not hesitate to let us know. Our RedHat OCEG GRCA exam training materials contains questions and answers. We assume all the responsibilities our CompTIA PT0-003 simulating practice may bring you foreseeable outcomes and you will not regret for believing in us assuredly.
Updated: May 27, 2022