Do you want to pass RH-202 Practice Test Online exam and get the related certification within the minimum time and effort? If you would like to give me a positive answer, you really should keep a close eye on our website since you can find the best RH-202 Practice Test Online study material in here--our RH-202 Practice Test Online training materials. We have helped millions of thousands of candidates to prepare for the RH-202 Practice Test Online exam and all of them have got a fruitful outcome, we believe you will be the next winner as long as you join in us! You must be very clear about what this social opportunity means! In other words, RH-202 Practice Test Online study materials can help you gain a higher status and salary. With RH-202 Practice Test Online training prep, you only need to spend 20 to 30 hours of practice before you take the RH-202 Practice Test Online exam.
Red Hat Certification RH-202 Also it is good for releasing pressure.
We think of providing the best services of RH-202 - Redhat Certified Technician on Redhat Enterprise Linux 5 (Labs) Practice Test Online exam questions as our obligation. The Valid RH-202 Real Test Questions practice test content is very easy and simple to understand. We offer money back guarantee if anyone fails but that doesn’t happen if one use our Valid RH-202 Real Test Questions dumps.
Good practice materials like our Redhat Certified Technician on Redhat Enterprise Linux 5 (Labs) study question can educate exam candidates with the most knowledge. Do not make your decisions now will be a pity for good. It is a popular belief that only processional experts can be the leading one to do some adept job.
Our RedHat RH-202 Practice Test Online exam materials have plenty of advantages.
The software version of our RH-202 Practice Test Online study engine is designed to simulate a real exam situation. You can install it to as many computers as you need as long as the computer is in Windows system. And our software of the RH-202 Practice Test Online training material also allows different users to study at the same time. It's economical for a company to buy it for its staff. Friends or workmates can also buy and learn with our RH-202 Practice Test Online practice guide together.
Repeated attempts will sharpen your minds. Maybe our RH-202 Practice Test Online learning quiz is suitable for you.
RH-202 PDF DEMO:
QUESTION NO: 1
vi /etc/fstab /dev/hda? swap swap defaults 0 0
QUESTION NO: 2
free -m Verify Either Swap is enabled or not.
QUESTION NO: 3
swapon /dev/hda? To enable the Swap space from partition.
QUESTION NO: 4
mkswap /dev/hda? To create Swap File system on partition.
QUESTION NO: 5
Verify by mounting on current Sessions also:
mount /dev/hda? /data
5. You are new System Administrator and from now you are going to handle the system and your main task is Network monitoring, Backup and Restore. But you don't know the root password. Change the root password to redhat and login in default Runlevel.
Answer and Explanation:
When you Boot the System, it starts on default Runlevel specified in /etc/inittab: Id:?:initdefault:
When System Successfully boot, it will ask for username and password. But you don't know the root's password. To change the root password you need to boot the system into single user mode. You can pass the kernel arguments from the boot loader.
1. Restart the System.
2. You will get the boot loader GRUB screen.
3. Press a and type 1 or s for single mode ro root=LABEL=/ rhgb queit s
4. System will boot on Single User mode.
5. Use passwd command to change.
6. Press ctrl+d
6. There are more then 400 Computers in your Office. You are appointed as a System Administrator. But you don't have Router. So, you are going to use your One Linux Server as a Router. How will you enable
IP packets forward?
Answer and Explanation:
1. /proc is the virtual filesystem, we use /proc to modify the kernel parameters at running time.
# echo "1" >/proc/sys/net/ipv4/ip_forward
2. /etc/sysctl.conf when System Reboot on next time, /etc/rc.d/rc.sysinit scripts reads the file
/etc/sysctl.conf. To enable the IP forwarding on next reboot also you need to set the parameter. net.ipv4.ip_forward=1
Here 0 means disable, 1 means enable.
7. You Completely Install the Redhat Enterprise Linux ES 4 on your System. While start the system, it's giving error to load X window System. How will you fix that problem and make boot successfully run X
Window System.
Answer and Explanation:
Think while Problems occurred on booting System on Runlevel 5 (X Window).
1. /tmp is full or not
2. Quota is already reached
3. Video card or resolution or monitor is misconfigured.
4. xfs service is running or not.
Do These:
1. df -h /tmp /tmp is full remove the unnecessary file
2. quota username if quota is already reached remove unnecessary file from home directory.
3. Boot the System in runlevel 3. you can pass the Kernel Argument from boot loader.
4. Use command: system-config-display It will display a dialog to configure the monitor, Video card, resolution etc.
5. Set the Default Runlevel 5 in /etc/inittab id:5:initdefault:
6. Reboot the System you will get the GUI login Screen.
8. There are two different networks, 192.168.0.0/24 and 192.168.1.0/24. Your System is in 192.168.0.0/24
Network. One RHEL 4 Installed System is going to use as a Router. All required configuration is already done on Linux Server. Where 192.168.0.254 and 192.168.1.254 IP Address are assigned on that Server.
How will make successfully ping to 192.168.1.0/24 Network's Host?
Answer:
1. vi /etc/sysconfig/network
GATEWAY=192.168.0.254
OR
vi /etc/sysconf/network-scripts/ifcfg-eth0
DEVICE=eth0
BOOTPROTO=static
ONBOOT=yes
IPADDR=192.168.0.?
NETMASK=255.255.255.0
GATEWAY=192.168.0.254
2. service network restart
Explanation: Gateway defines the way to exit the packets. According to question System working as a router for two networks have IP Address 192.168.0.254 and 192.168.1.254. To get the hosts on
192.168.1.0/24 should go through 192.168.0.254.
9. Make a swap partition having 100MB. Make Automatically Usable at System Boot Time.
Answer and Explanation:
1. Use fdisk /dev/hda To create new partition.
2. Type n For New partition
3. It will ask for Logical or Primary Partitions. Press l for logical.
4. It will ask for the Starting Cylinder: Use the Default by pressing Enter Key.
5. Type the Size: +100M You can Specify either Last cylinder of Size here.
6. Press P to verify the partitions lists and remember the partitions name.
Default System ID is 83 that means Linux Native.
7. Type t to change the System ID of partition.
8. Type Partition Number
9. Type 82 that means Linux Swap.
10. Press w to write on partitions table.
11. Either Reboot or use partprobe command.
OCEG GRCA exam questions promise that if you fail to pass the exam successfully after purchasing our product, we are willing to provide you with a 100% full refund. SAP C-THR89-2405 - It is time for you to plan your life carefully. We will send our ServiceNow CIS-CSM exam question in 5-10 minutes after their payment. EMC D-ISM-FN-23-KR - Please make a decision quickly. CIW 1D0-671 - Today, in an era of fierce competition, how can we occupy a place in a market where talent is saturated? The answer is a certificate.
Updated: May 27, 2022