Our RH-202 Latest Real Exam training quiz will be your best teacher who helps you to find the key and difficulty of the exam, so that you no longer feel confused when review. Our RH-202 Latest Real Exam study materials will be your best learning partner and will accompany you through every day of the review. Our RH-202 Latest Real Exam exam quiz will help you to deal with all the difficulties you have encountered in the learning process and make you walk more easily and happily on the road of studying. RedHat RH-202 Latest Real Exam exam cram PDF will be great helper for your coming exam definitely. The secret of success is constancy to purpose. With the rapid development of the economy, the demands of society on us are getting higher and higher.
Red Hat Certification RH-202 Omgzlook will never disappoint you.
If you are not satisfied with the function of PDF version which just only provide you the questions and answers, the APP version of RH-202 - Redhat Certified Technician on Redhat Enterprise Linux 5 (Labs) Latest Real Exam exam cram materials can offer you more. So you have nothing to worry about, only to study with our Practice RH-202 Test exam questions with full attention. And as we have been in this career for over ten years, our Practice RH-202 Test learning materials have became famous as a pass guarantee.
Omgzlook will help you with its valid and high quality RH-202 Latest Real Exam prep torrent. RH-202 Latest Real Exam questions & answers are compiled by our senior experts who with rich experience. Besides, we check the update about RH-202 Latest Real Exam training pdf every day.
RedHat RH-202 Latest Real Exam - It is enough to help you to easily pass the exam.
The whole world of RH-202 Latest Real Exam preparation materials has changed so fast in the recent years because of the development of internet technology. We have benefited a lot from those changes. In order to keep pace with the development of the society, we also need to widen our knowledge. If you are a diligent person, we strongly advise you to try our RH-202 Latest Real Exam real test. You will be attracted greatly by our RH-202 Latest Real Exam practice engine. .
But it is not necessary to spend a lot of time and effort to learn the expertise. You can choose Omgzlook's RedHat RH-202 Latest Real Exam exam training materials.
RH-202 PDF DEMO:
QUESTION NO: 1
Use mkfs -t ext3 /dev/hda?
Or
mke2fs -j /dev/hda? To create ext3 filesystem.
QUESTION NO: 2
vi /etc/fstab
Write:
/dev/hda? /data ext3 defaults 1 2
QUESTION NO: 3
Either Reboot or use partprobe command.
QUESTION NO: 4
Verify by mounting on current Sessions also:
mount /dev/hda? /data
5. You are new System Administrator and from now you are going to handle the system and your main task is Network monitoring, Backup and Restore. But you don't know the root password. Change the root password to redhat and login in default Runlevel.
Answer and Explanation:
When you Boot the System, it starts on default Runlevel specified in /etc/inittab: Id:?:initdefault:
When System Successfully boot, it will ask for username and password. But you don't know the root's password. To change the root password you need to boot the system into single user mode. You can pass the kernel arguments from the boot loader.
1. Restart the System.
2. You will get the boot loader GRUB screen.
3. Press a and type 1 or s for single mode ro root=LABEL=/ rhgb queit s
4. System will boot on Single User mode.
5. Use passwd command to change.
6. Press ctrl+d
6. There are more then 400 Computers in your Office. You are appointed as a System Administrator. But you don't have Router. So, you are going to use your One Linux Server as a Router. How will you enable
IP packets forward?
Answer and Explanation:
1. /proc is the virtual filesystem, we use /proc to modify the kernel parameters at running time.
# echo "1" >/proc/sys/net/ipv4/ip_forward
2. /etc/sysctl.conf when System Reboot on next time, /etc/rc.d/rc.sysinit scripts reads the file
/etc/sysctl.conf. To enable the IP forwarding on next reboot also you need to set the parameter. net.ipv4.ip_forward=1
Here 0 means disable, 1 means enable.
7. You Completely Install the Redhat Enterprise Linux ES 4 on your System. While start the system, it's giving error to load X window System. How will you fix that problem and make boot successfully run X
Window System.
Answer and Explanation:
Think while Problems occurred on booting System on Runlevel 5 (X Window).
1. /tmp is full or not
2. Quota is already reached
3. Video card or resolution or monitor is misconfigured.
4. xfs service is running or not.
Do These:
1. df -h /tmp /tmp is full remove the unnecessary file
2. quota username if quota is already reached remove unnecessary file from home directory.
3. Boot the System in runlevel 3. you can pass the Kernel Argument from boot loader.
4. Use command: system-config-display It will display a dialog to configure the monitor, Video card, resolution etc.
5. Set the Default Runlevel 5 in /etc/inittab id:5:initdefault:
6. Reboot the System you will get the GUI login Screen.
8. There are two different networks, 192.168.0.0/24 and 192.168.1.0/24. Your System is in 192.168.0.0/24
Network. One RHEL 4 Installed System is going to use as a Router. All required configuration is already done on Linux Server. Where 192.168.0.254 and 192.168.1.254 IP Address are assigned on that Server.
How will make successfully ping to 192.168.1.0/24 Network's Host?
Answer:
1. vi /etc/sysconfig/network
GATEWAY=192.168.0.254
OR
vi /etc/sysconf/network-scripts/ifcfg-eth0
DEVICE=eth0
BOOTPROTO=static
ONBOOT=yes
IPADDR=192.168.0.?
NETMASK=255.255.255.0
GATEWAY=192.168.0.254
2. service network restart
Explanation: Gateway defines the way to exit the packets. According to question System working as a router for two networks have IP Address 192.168.0.254 and 192.168.1.254. To get the hosts on
192.168.1.0/24 should go through 192.168.0.254.
9. Make a swap partition having 100MB. Make Automatically Usable at System Boot Time.
Answer and Explanation:
1. Use fdisk /dev/hda To create new partition.
2. Type n For New partition
3. It will ask for Logical or Primary Partitions. Press l for logical.
4. It will ask for the Starting Cylinder: Use the Default by pressing Enter Key.
5. Type the Size: +100M You can Specify either Last cylinder of Size here.
6. Press P to verify the partitions lists and remember the partitions name.
Default System ID is 83 that means Linux Native.
7. Type t to change the System ID of partition.
8. Type Partition Number
9. Type 82 that means Linux Swap.
10. Press w to write on partitions table.
11. Either Reboot or use partprobe command.
QUESTION NO: 5
Press w to write on partitions table.
SAP C-TS462-2023 - You never know what you can get till you try. Fortinet NSE7_EFW-7.2 - But God forced me to keep moving. Under the instruction of our Microsoft AZ-900-KR test prep, you are able to finish your task in a very short time and pass the exam without mistakes to obtain the RedHat certificate. Are you bothered by looking for good exam materials of RedHat Axis Communications CTS test? Don't worry. So many our customers have benefited form our Appian ACA100 preparation quiz, so will you!
Updated: May 27, 2022