So stop hesitation and buy our study materials. There are a lot of excellent experts and professors in our company. The high quality of the RH-202 Examcollection Questions Answers reference guide from our company resulted from their constant practice, hard work and their strong team spirit. Expert for one-year free updating of RH-202 Examcollection Questions Answers dumps pdf, we promise you full refund if you failed exam with our dumps. Preparing for the RH-202 Examcollection Questions Answers real exam is easier if you can select the right test questions and be sure of the answers. So you just need to memorize our correct questions and answers of the RH-202 Examcollection Questions Answers study materials.
Red Hat Certification RH-202 Come to try and you will be satisfied!
We believe you will also competent enough to cope with demanding and professorial work with competence with the help of our RH-202 - Redhat Certified Technician on Redhat Enterprise Linux 5 (Labs) Examcollection Questions Answers exam braindumps. The New RH-202 Test Online guide torrent is a tool that aimed to help every candidate to pass the exam. Our exam materials can installation and download set no limits for the amount of the computers and persons.
You can find the latest version of RH-202 Examcollection Questions Answers practice guide in our website and you can practice RH-202 Examcollection Questions Answers study materials in advance correctly and assuredly. The following passages are their advantages for your information If you try to free download the demos on the website, and you will be amazed by our excellent RH-202 Examcollection Questions Answers preparation engine.
Our RedHat RH-202 Examcollection Questions Answers exam materials have plenty of advantages.
The software version of our RH-202 Examcollection Questions Answers study engine is designed to simulate a real exam situation. You can install it to as many computers as you need as long as the computer is in Windows system. And our software of the RH-202 Examcollection Questions Answers training material also allows different users to study at the same time. It's economical for a company to buy it for its staff. Friends or workmates can also buy and learn with our RH-202 Examcollection Questions Answers practice guide together.
Repeated attempts will sharpen your minds. Maybe our RH-202 Examcollection Questions Answers learning quiz is suitable for you.
RH-202 PDF DEMO:
QUESTION NO: 1
vi /etc/fstab
Write:
/dev/hda? /data ext3 defaults 1 2
QUESTION NO: 2
Verify by mounting on current Sessions also:
mount /dev/hda? /data
5. You are new System Administrator and from now you are going to handle the system and your main task is Network monitoring, Backup and Restore. But you don't know the root password. Change the root password to redhat and login in default Runlevel.
Answer and Explanation:
When you Boot the System, it starts on default Runlevel specified in /etc/inittab: Id:?:initdefault:
When System Successfully boot, it will ask for username and password. But you don't know the root's password. To change the root password you need to boot the system into single user mode. You can pass the kernel arguments from the boot loader.
1. Restart the System.
2. You will get the boot loader GRUB screen.
3. Press a and type 1 or s for single mode ro root=LABEL=/ rhgb queit s
4. System will boot on Single User mode.
5. Use passwd command to change.
6. Press ctrl+d
6. There are more then 400 Computers in your Office. You are appointed as a System Administrator. But you don't have Router. So, you are going to use your One Linux Server as a Router. How will you enable
IP packets forward?
Answer and Explanation:
1. /proc is the virtual filesystem, we use /proc to modify the kernel parameters at running time.
# echo "1" >/proc/sys/net/ipv4/ip_forward
2. /etc/sysctl.conf when System Reboot on next time, /etc/rc.d/rc.sysinit scripts reads the file
/etc/sysctl.conf. To enable the IP forwarding on next reboot also you need to set the parameter. net.ipv4.ip_forward=1
Here 0 means disable, 1 means enable.
7. You Completely Install the Redhat Enterprise Linux ES 4 on your System. While start the system, it's giving error to load X window System. How will you fix that problem and make boot successfully run X
Window System.
Answer and Explanation:
Think while Problems occurred on booting System on Runlevel 5 (X Window).
1. /tmp is full or not
2. Quota is already reached
3. Video card or resolution or monitor is misconfigured.
4. xfs service is running or not.
Do These:
1. df -h /tmp /tmp is full remove the unnecessary file
2. quota username if quota is already reached remove unnecessary file from home directory.
3. Boot the System in runlevel 3. you can pass the Kernel Argument from boot loader.
4. Use command: system-config-display It will display a dialog to configure the monitor, Video card, resolution etc.
5. Set the Default Runlevel 5 in /etc/inittab id:5:initdefault:
6. Reboot the System you will get the GUI login Screen.
8. There are two different networks, 192.168.0.0/24 and 192.168.1.0/24. Your System is in 192.168.0.0/24
Network. One RHEL 4 Installed System is going to use as a Router. All required configuration is already done on Linux Server. Where 192.168.0.254 and 192.168.1.254 IP Address are assigned on that Server.
How will make successfully ping to 192.168.1.0/24 Network's Host?
Answer:
1. vi /etc/sysconfig/network
GATEWAY=192.168.0.254
OR
vi /etc/sysconf/network-scripts/ifcfg-eth0
DEVICE=eth0
BOOTPROTO=static
ONBOOT=yes
IPADDR=192.168.0.?
NETMASK=255.255.255.0
GATEWAY=192.168.0.254
2. service network restart
Explanation: Gateway defines the way to exit the packets. According to question System working as a router for two networks have IP Address 192.168.0.254 and 192.168.1.254. To get the hosts on
192.168.1.0/24 should go through 192.168.0.254.
9. Make a swap partition having 100MB. Make Automatically Usable at System Boot Time.
Answer and Explanation:
1. Use fdisk /dev/hda To create new partition.
2. Type n For New partition
3. It will ask for Logical or Primary Partitions. Press l for logical.
4. It will ask for the Starting Cylinder: Use the Default by pressing Enter Key.
5. Type the Size: +100M You can Specify either Last cylinder of Size here.
6. Press P to verify the partitions lists and remember the partitions name.
Default System ID is 83 that means Linux Native.
7. Type t to change the System ID of partition.
8. Type Partition Number
9. Type 82 that means Linux Swap.
10. Press w to write on partitions table.
11. Either Reboot or use partprobe command.
QUESTION NO: 3
Use mkfs -t ext3 /dev/hda?
Or
mke2fs -j /dev/hda? To create ext3 filesystem.
QUESTION NO: 4
mkswap /dev/hda? To create Swap File system on partition.
QUESTION NO: 5
Either Reboot or use partprobe command.
SAP C-S4CPR-2408 - Redhat Certified Technician on Redhat Enterprise Linux 5 (Labs) exam tests are a high-quality product recognized by hundreds of industry experts. EMC D-XTR-MN-A-24 - After all, you have to make money by yourself. Because the most clients may be busy in their jobs or other significant things, the time they can spare to learn our Microsoft PL-500 learning guide is limited and little. EMC D-ISM-FN-23-KR - Please make a decision quickly. What the certificate main? All kinds of the test PMI PMO-CP certification, prove you through all kinds of qualification certificate, it is not hard to find, more and more people are willing to invest time and effort on the PMI PMO-CP exam guide, because get the test PMI PMO-CP certification is not an easy thing, so, a lot of people are looking for an efficient learning method.
Updated: May 27, 2022