As you can see, our products are absolutely popular in the market. And the pass rate of our AZ-220 Valid Test Materials training guide is high as 98% to 100%. Just buy it and you will love it! Come to study our AZ-220 Valid Test Materials learning materials. Stick to the end, victory is at hand. Once it is time to submit your exercises, the system of the AZ-220 Valid Test Materials preparation exam will automatically finish your operation.
Microsoft Certified: Azure IoT Developer Specialty AZ-220 And you can choose the favorite one.
According to the data that are proved and tested by our loyal customers, the pass rate of our AZ-220 - Microsoft Azure IoT Developer Valid Test Materials exam questions is high as 98% to 100%. Many exam candidates are uninformed about the fact that our AZ-220 Latest Exam Question preparation materials can help them with higher chance of getting success than others. It is all about efficiency and accuracy.
With our study materials, you only need 20-30 hours of study to successfully pass the exam and reach the peak of your career. What are you waiting for? Come and buy it now. With the improvement of people’s living standards, there are more and more highly educated people.
Microsoft AZ-220 Valid Test Materials - Omgzlook guarantee 100% success.
Nowadays, online shopping has been greatly developed, but because of the fear of some uncontrollable problems after payment, there are still many people don't trust to buy things online, especially electronic products. But you don't have to worry about this when buying our AZ-220 Valid Test Materials actual exam. Not only will we fully consider for customers before and during the purchase on our AZ-220 Valid Test Materials practice guide, but we will also provide you with warm and thoughtful service on the AZ-220 Valid Test Materials training guide.
If you find any quality problems of our AZ-220 Valid Test Materials or you do not pass the exam, we will unconditionally full refund. Omgzlook is professional site that providing Microsoft AZ-220 Valid Test Materials questions and answers , it covers almost the AZ-220 Valid Test Materials full knowledge points.
AZ-220 PDF DEMO:
QUESTION NO: 1
You have an Azure IoT solution that includes an Azure IoT hub.
You receive a root certification authority (CA) certificate from the security department at your company.
You need to configure the IoT hub to use the root CA certificate.
Which four actions should you perform in sequence? To answer, move the appropriate actions from the list of actions to the answer area and arrange them in the correct order.
Answer:
Reference:
https://docs.microsoft.com/bs-latn-ba/azure/iot-hub/iot-hub-security-x509-get-started
QUESTION NO: 2
You have an instance of Azure Time Series Insights and an Azure IoT hub that receives streaming telemetry from IoT devices.
You need to configure Time Series Insights to receive telemetry from the devices.
Which three actions should you perform in sequence? To answer, move the appropriate actions from the list of actions to the answer area and arrange them in the correct order.
Answer:
Explanation:
Step 1: Create a dedicated consumer group..
Add a consumer group to your IoT hub.
Applications use consumer groups to pull data from Azure IoT Hub. To reliably read data from your
IoT hub, provide a dedicated consumer group that's used only by this Time Series Insights environment.
Step 2: Add a new Time Series Insights event source.
Add a new event source
Sign in to the Azure portal.
In the left menu, select All resources. Select your Time Series Insights environment.
Under Settings, select Event Sources, and then select Add.
In the New event source pane, for Event source name, enter a name that's unique to this Time Series
Insights environment. For example, enter event-stream.
Step 3: Configure the Time Series event source to connect to an existing IOT hub Step 4: For Source, select IoT Hub.
Step 5: Select a value for Import option:
If you already have an IoT hub in one of your subscriptions, select Use IoT Hub from available subscriptions. This option is the easiest approach.
Reference:
https://docs.microsoft.com/en-us/azure/time-series-insights/time-series-insights-how-to-add-an- event-source-iothub
QUESTION NO: 3
You have an Azure IoT hub that is being taken from prototype to production.
You plan to connect IoT devices to the IoT hub. The devices have hardware security modules (HSMs).
You need to use the most secure authentication method between the devices and the IoT hub.
Company policy prohibits the use of internally generated certificates.
Which authentication method should you use?
A. a symmetric key
B. An X.509 certificate signed by a root certification authority (CA).
C. an X.509 self-signed certificate
D. a certificate thumbprint
Answer: B
Explanation:
Purchase X.509 certificates from a root certificate authority (CA). This method is recommended for production environments.
The hardware security module, or HSM, is used for secure, hardware-based storage of device secrets, and is the most secure form of secret storage. Both X.509 certificates and SAS tokens can be stored in the HSM Reference:
https://docs.microsoft.com/en-us/azure/iot-dps/concepts-security
QUESTION NO: 4
You need to configure Stream Analytics to meet the POV requirements.
What are two ways to achieve the goal? Each Answer presents a complete solution.
NOTE: Each correct selection is worth one point.
A. Route telemetry to an Azure Blob storage custom endpoint, and then configure the Blob storage as a reference input for Stream Analytics.
B. Create an input in Stream Analytics that uses the built-in events endpoint of IoT Hub as the source.
C. From IoT Hub, create a custom event hub endpoint, and then configure the endpoint as an input to Stream Analytics.
D. Create a Stream Analytics module, and then deploy the module to all IoT Edge devices in the fleet.
Answer: B,C
Explanation:
QUESTION NO: 5
Your company is creating a new camera security system that will use Azure IoT Hub.
You plan to use an Azure IoT Edge device that will run Ubuntu Server 18.04.
You need to configure the IoT Edge device.
Which three actions should you perform in sequence? To answer, move the appropriate actions from the list of actions to the answer area and arrange them in the correct order.
Answer:
Explanation:
Step 1: Run the following commands
Install the container runtime.
Azure IoT Edge relies on an OCI-compatible container runtime. For production scenarios, we recommended that you use the Moby-based engine provided below. The Moby engine is the only container engine officially supported with Azure IoT Edge. Docker CE/EE container images are compatible with the Moby runtime.
Install the Moby engine.
sudo apt-get install moby-engine
Install the Moby command-line interface (CLI). The CLI is useful for development but optional for production deployments.
sudo apt-get install moby-cli
Install the security daemon. The package is installed at /etc/iotedge/.
sudo apt-get install iotedge
Step 2: From IotHub,create an IoT Edge device registry entry.
Note: In your IoT Hub in the Azure portal, IoT Edge devices are created and managed separately from
IOT devices that are not edge enabled.
Sign in to the Azure portal and navigate to your IoT hub.
In the left pane, select IoT Edge from the menu.
Select Add an IoT Edge device.
Provide a descriptive device ID. Use the default settings to auto-generate authentication keys and connect the new device to your hub.
Select Save.
Retrieve the connection string in the Azure portal
1. When you're ready to set up your device, you need the connection string that links your physical device with its identity in the IoT hub.
2. From the IoT Edge page in the portal, click on the device ID from the list of IoT Edge devices.
3. Copy the value of either Primary Connection String or Secondary Connection String.
Step 3: Add the connection string to..
To manually provision a device, you need to provide it with a device connection string that you can create by registering a new device in your IoT hub.
Open the configuration file.
sudo nano /etc/iotedge/config.yaml
Find the provisioning configurations of the file and uncomment the Manual provisioning configuration section. Update the value of device_connection_string with the connection string from your IoT Edge device.
Save and close the file.
After entering the provisioning information in the configuration file, restart the daemon:
sudosystemctl restart iotedge
Reference:
https://docs.microsoft.com/en-us/azure/iot-edge/how-to-install-iot-edge-linux
Perhaps you know nothing about our ISM CORe study guide. SAP C_S4FCF_2023 - Omgzlook has been to make the greatest efforts to provide the best and most convenient service for our candidates. ISTQB CT-AI - Then after deliberate considerations, you can directly purchase the most suitable one for yourself. Omgzlook's Microsoft Microsoft AI-900-CN exam training materials is a very good training materials. SAP C_TS422_2023 - Although we might come across many difficulties during pursuing our dreams, we should never give up.
Updated: May 28, 2022