Once it is time to submit your exercises, the system of the AZ-220 Practice Questions Sheet preparation exam will automatically finish your operation. After a several time, you will get used to finish your test on time. If you are satisfied with our AZ-220 Practice Questions Sheet training guide, come to choose and purchase. As you know, it is troublesome to get the AZ-220 Practice Questions Sheetcertificate. Now, you are fortunate enough to come across our AZ-220 Practice Questions Sheet exam guide. We sincerely hope that you can pay more attention to our AZ-220 Practice Questions Sheet study questions.
Microsoft Certified: Azure IoT Developer Specialty AZ-220 Life is full of ups and downs.
Microsoft Certified: Azure IoT Developer Specialty AZ-220 Practice Questions Sheet - Microsoft Azure IoT Developer Only through our careful inspection, the study material can be uploaded to our platform. Also, your payment information of the AZ-220 Vce Download study materials will be secret. No one will crack your passwords.
In general, users can only wait about 5-10 minutes to receive our AZ-220 Practice Questions Sheet learning material, and if there are any problems with the reception, users may contact our staff at any time. To sum up, our delivery efficiency is extremely high and time is precious, so once you receive our email, start your new learning journey. Our product backend port system is powerful, so it can be implemented even when a lot of people browse our website can still let users quickly choose the most suitable for his Microsoft Azure IoT Developer qualification question, and quickly completed payment.
Microsoft AZ-220 Practice Questions Sheet - You really don't have time to hesitate.
Omgzlook is a wonderful study platform that can transform your effective diligence in to your best rewards. By years of diligent work, our experts have collected the frequent-tested knowledge into our AZ-220 Practice Questions Sheet exam materials for your reference. So our AZ-220 Practice Questions Sheet practice questions are triumph of their endeavor. I can say that no one can know the AZ-220 Practice Questions Sheet study guide better than them and our quality of the AZ-220 Practice Questions Sheet learning quiz is the best.
I believe this will also be one of the reasons why you choose our AZ-220 Practice Questions Sheet study materials. After you use AZ-220 Practice Questions Sheet real exam，you will not encounter any problems with system .
AZ-220 PDF DEMO:
QUESTION NO: 1
You have an Azure IoT solution that includes an Azure IoT hub.
You receive a root certification authority (CA) certificate from the security department at your company.
You need to configure the IoT hub to use the root CA certificate.
Which four actions should you perform in sequence? To answer, move the appropriate actions from the list of actions to the answer area and arrange them in the correct order.
Answer:
Reference:
https://docs.microsoft.com/bs-latn-ba/azure/iot-hub/iot-hub-security-x509-get-started
QUESTION NO: 2
You have an instance of Azure Time Series Insights and an Azure IoT hub that receives streaming telemetry from IoT devices.
You need to configure Time Series Insights to receive telemetry from the devices.
Which three actions should you perform in sequence? To answer, move the appropriate actions from the list of actions to the answer area and arrange them in the correct order.
Answer:
Explanation:
Step 1: Create a dedicated consumer group..
Add a consumer group to your IoT hub.
Applications use consumer groups to pull data from Azure IoT Hub. To reliably read data from your
IoT hub, provide a dedicated consumer group that's used only by this Time Series Insights environment.
Step 2: Add a new Time Series Insights event source.
Add a new event source
Sign in to the Azure portal.
In the left menu, select All resources. Select your Time Series Insights environment.
Under Settings, select Event Sources, and then select Add.
In the New event source pane, for Event source name, enter a name that's unique to this Time Series
Insights environment. For example, enter event-stream.
Step 3: Configure the Time Series event source to connect to an existing IOT hub Step 4: For Source, select IoT Hub.
Step 5: Select a value for Import option:
If you already have an IoT hub in one of your subscriptions, select Use IoT Hub from available subscriptions. This option is the easiest approach.
Reference:
https://docs.microsoft.com/en-us/azure/time-series-insights/time-series-insights-how-to-add-an- event-source-iothub
QUESTION NO: 3
You have an Azure IoT hub that is being taken from prototype to production.
You plan to connect IoT devices to the IoT hub. The devices have hardware security modules (HSMs).
You need to use the most secure authentication method between the devices and the IoT hub.
Company policy prohibits the use of internally generated certificates.
Which authentication method should you use?
A. a symmetric key
B. An X.509 certificate signed by a root certification authority (CA).
C. an X.509 self-signed certificate
D. a certificate thumbprint
Answer: B
Explanation:
Purchase X.509 certificates from a root certificate authority (CA). This method is recommended for production environments.
The hardware security module, or HSM, is used for secure, hardware-based storage of device secrets, and is the most secure form of secret storage. Both X.509 certificates and SAS tokens can be stored in the HSM Reference:
https://docs.microsoft.com/en-us/azure/iot-dps/concepts-security
QUESTION NO: 4
You need to configure Stream Analytics to meet the POV requirements.
What are two ways to achieve the goal? Each Answer presents a complete solution.
NOTE: Each correct selection is worth one point.
A. Route telemetry to an Azure Blob storage custom endpoint, and then configure the Blob storage as a reference input for Stream Analytics.
B. Create an input in Stream Analytics that uses the built-in events endpoint of IoT Hub as the source.
C. From IoT Hub, create a custom event hub endpoint, and then configure the endpoint as an input to Stream Analytics.
D. Create a Stream Analytics module, and then deploy the module to all IoT Edge devices in the fleet.
Answer: B,C
Explanation:
QUESTION NO: 5
Your company is creating a new camera security system that will use Azure IoT Hub.
You plan to use an Azure IoT Edge device that will run Ubuntu Server 18.04.
You need to configure the IoT Edge device.
Which three actions should you perform in sequence? To answer, move the appropriate actions from the list of actions to the answer area and arrange them in the correct order.
Answer:
Explanation:
Step 1: Run the following commands
Install the container runtime.
Azure IoT Edge relies on an OCI-compatible container runtime. For production scenarios, we recommended that you use the Moby-based engine provided below. The Moby engine is the only container engine officially supported with Azure IoT Edge. Docker CE/EE container images are compatible with the Moby runtime.
Install the Moby engine.
sudo apt-get install moby-engine
Install the Moby command-line interface (CLI). The CLI is useful for development but optional for production deployments.
sudo apt-get install moby-cli
Install the security daemon. The package is installed at /etc/iotedge/.
sudo apt-get install iotedge
Step 2: From IotHub,create an IoT Edge device registry entry.
Note: In your IoT Hub in the Azure portal, IoT Edge devices are created and managed separately from
IOT devices that are not edge enabled.
Sign in to the Azure portal and navigate to your IoT hub.
In the left pane, select IoT Edge from the menu.
Select Add an IoT Edge device.
Provide a descriptive device ID. Use the default settings to auto-generate authentication keys and connect the new device to your hub.
Select Save.
Retrieve the connection string in the Azure portal
1. When you're ready to set up your device, you need the connection string that links your physical device with its identity in the IoT hub.
2. From the IoT Edge page in the portal, click on the device ID from the list of IoT Edge devices.
3. Copy the value of either Primary Connection String or Secondary Connection String.
Step 3: Add the connection string to..
To manually provision a device, you need to provide it with a device connection string that you can create by registering a new device in your IoT hub.
Open the configuration file.
sudo nano /etc/iotedge/config.yaml
Find the provisioning configurations of the file and uncomment the Manual provisioning configuration section. Update the value of device_connection_string with the connection string from your IoT Edge device.
Save and close the file.
After entering the provisioning information in the configuration file, restart the daemon:
sudosystemctl restart iotedge
Reference:
https://docs.microsoft.com/en-us/azure/iot-edge/how-to-install-iot-edge-linux
With all this reputation, our company still take customers first, the reason we become successful lies on the professional expert team we possess , who engage themselves in the research and development of our WGU Integrated-Physical-Sciences learning guide for many years. ARDMS SPI - What’s more, a sticky note can be used on your paper materials, which help your further understanding the knowledge and review what you have grasped from the notes. Salesforce Salesforce-Hyperautomation-Specialist - You can download our free demos and get to know synoptic outline before buying. You can choose the version of IBM C1000-112 training quiz according to your interests and habits. About the upcoming IBM S1000-007 exam, do you have mastered the key parts which the exam will test up to now? Everyone is conscious of the importance and only the smart one with smart way can make it.
Updated: May 28, 2022