Because many users are first taking part in the exams, so for the exam and test time distribution of the above lack certain experience, and thus prone to the confusion in the examination place, time to grasp, eventually led to not finish the exam totally. In order to avoid the occurrence of this phenomenon, the Microsoft Azure Administrator study question have corresponding products to each exam simulation test environment, users log on to their account on the platform, at the same time to choose what they want to attend the exam simulation questions, the AZ-104 Study Questions Ppt exam questions are automatically for the user presents the same as the actual test environment simulation test system, the software built-in timer function can help users better control over time, so as to achieve the systematic, keep up, as well as to improve the user's speed to solve the problem from the side with our AZ-104 Study Questions Ppt test guide. Our Microsoft AZ-104 Study Questions Ppt study material offers you high-quality training material and helps you have a good knowledge of the AZ-104 Study Questions Ppt actual test. The team members of Omgzlook work with a passion to guarantee your success and make you prosperous. After you pass the AZ-104 Study Questions Ppt test you will enjoy the benefits the certificate brings to you such as you will be promoted by your boss in a short time and your wage will surpass your colleagues.
Microsoft Azure Administrator Associate AZ-104 It doesn’t matter.
Microsoft Azure Administrator Associate AZ-104 Study Questions Ppt - Microsoft Azure Administrator If you are urgent to pass exam our exam materials will be suitable for you. There is no doubt that the certification has become more and more important for a lot of people, especial these people who are looking for a good job, and it has been a general trend. More and more workers have to spend a lot of time on meeting the challenge of gaining the Valid AZ-104 Guide Files certification by sitting for an exam.
Please totally trust the accuracy of questions and answers. Attending Omgzlook, you will have best exam dumps for the certification of AZ-104 Study Questions Ppt exam tests. We offer you the most accurate AZ-104 Study Questions Ppt exam answers that will be your key to pass the certification exam in your first try.
Microsoft AZ-104 Study Questions Ppt - You can take advantage of the certification.
Our AZ-104 Study Questions Ppt exam review contains the latest test questions and accurate answers along with the professional explanations. A little attention to prepare AZ-104 Study Questions Ppt practice test will improve your skills to clear exam with high passing score. For most busy IT workers, AZ-104 Study Questions Ppt dumps pdf is the best alternative to your time and money to secure the way of success in the IT filed.
Our AZ-104 Study Questions Ppt study materials allow you to improve your competitiveness in a short period of time. With the help of our AZ-104 Study Questions Ppt guide prep, you will be the best star better than others.
AZ-104 PDF DEMO:
QUESTION NO: 1
Note: This question is part of a series of questions that present the same scenario. Each question in the series contains a unique solution that might meet the stated goals. Some question sets might have more than one correct solution, while others might not have a correct solution.
After you answer a question in this section, you will NOT be able to return to it. As a result, these questions will not appear in the review screen.
You have an Azure subscription that contains the following resources:
* A virtual network that has a subnet named Subnet1
* Two network security groups (NSGs) named NSG-VM1 and NSG-Subnet1
* A virtual machine named VM1 that has the required Windows Server configurations to allow
Remote Desktop connections NSG-Subnet1 has the default inbound security rules only.
NSG-VM1 has the default inbound security rules and the following custom inbound security rule:
* Priority: 100
* Source: Any
* Source port range: *
* Destination: *
* Destination port range: 3389
* Protocol: UDP
* Action: Allow
VM1 connects to Subnet1. NSG1-VM1 is associated to the network interface of VM1. NSG-Subnet1 is associated to Subnet1.
You need to be able to establish Remote Desktop connections from the internet to VM1.
Solution: You add an inbound security rule to NSG-Subnet1 that allows connections from the Internet source to the VirtualNetwork destination for port range 3389 and uses the UDP protocol.
Does this meet the goal?
A. No
B. Yes
Answer: A
QUESTION NO: 2
You need to use Azure Automation State Configuration to manage the ongoing consistency of virtual machine configurations.
Which five actions should you perform in sequence? To answer, move the appropriate action from the list of actions to the answer area and arrange them in the correct order.
NOTE: More than one order of answer choices is correct. You will receive credit for any of the correct orders you select.
Answer:
Explanation:
Step 1: Upload a configuration to Azure Automation State Configuration.
Import the configuration into the Automation account.
Step 2: Compile a configuration into a node configuration.
A DSC configuration defining that state must be compiled into one or more node configurations (MOF document), and placed on the Automation DSC Pull Server.
Step 3: Onboard the virtual machines to Azure Automation State Configuration.
Onboard the Azure VM for management with Azure Automation State Configuration Step 4: Assign the node configuration Step 5: Check the compliance status of the node Each time Azure Automation
State Configuration performs a consistency check on a managed node, the node sends a status report back to the pull server. You can view these reports on the page for that node.
On the blade for an individual report, you can see the following status information for the corresponding consistency check:
The report status - whether the node is "Compliant", the configuration "Failed", or the node is "Not
Compliant" References:
https://docs.microsoft.com/en-us/azure/automation/automation-dsc-getting-started
QUESTION NO: 3
You have the Azure virtual machines shown in the following table.
A DNS service is install on VM1.
You configure the DNS server settings for each virtual network as shown in the following exhibit.
You need 10 ensure that all the virtual machines can resolve DNS names by using the DNS service on
VM1. What should you do?
A. Add service endpoints on VNET2 and VNET3.
B. Add service endpoints on VNET1.
C. Configure peering between VNE11, VNETT2, and VNET3.
D. Configure a conditional forwarder on VM1
Answer: D
Reference:
https://docs.microsoft.com/en-us/azure/virtual-network/virtual-networks-name-resolution-for-vms- and-role-instances
QUESTION NO: 4
You have an Azure subscription that contains an Azure Availability Set named WEBPROD-AS-
USE2 as shown in the following exhibit.
You add 14 virtual machines to WEBPROD-AS-USE2.
Use the drop-down menus to select the answer choice that completes each statement based on the information presented in the graphic.
NOTE: Each correct selection is worth one point.
Answer:
QUESTION NO: 5
Note: This question is part of a series of questions that present the same scenario. Each question in the series contains a unique solution that might meet the stated goals. Some question sets might have more than one correct solution, while others might not have a correct solution.
After you answer a question in this section, you will NOT be able to return to it. As a result, these questions will not appear in the review screen.
You have an Azure subscription that contains the following resources:
* A virtual network that has a subnet named Subnet1
* Two network security groups (NSGs) named NSG-VM1 and NSG-Subnet1
* A virtual machine named VM1 that has the required Windows Server configurations to allow
Remote Desktop connections NSG-Subnet1 has the default inbound security rules only.
NSG-VM1 has the default inbound security rules and the following custom inbound security rule:
* Priority: 100
* Source: Any
* Source port range: *
* Destination: *
* Destination port range: 3389
* Protocol: UDP
* Action: Allow
VM1 connects to Subnet1. NSG1-VM1 is associated to the network interface of VM1. NSG-Subnet1 is associated to Subnet1.
You need to be able to establish Remote Desktop connections from the internet to VM1.
Solution: You add an inbound security rule to NSG-Subnet1 and NSG-VM1 that allows connections from the internet source to the VirtualNetwork destination for port range 3389 and uses the TCP protocol.
Does this meet the goal?
A. No
B. Yes
Answer: B
Explanation:
The default port for RDP is TCP port 3389. A rule to permit RDP traffic must be created automatically when you create your VM.
Note on NSG-Subnet1: Azure routes network traffic between all subnets in a virtual network, by default.
References:
https://docs.microsoft.com/en-us/azure/virtual-machines/troubleshooting/troubleshoot-rdp- connection
You can find latest SAP C_THR12_2311 test answers and questions in our pass guide and the detailed explanations will help you understand the content easier. In order to facilitate the user real-time detection of the learning process, we Blue Prism AD01 exam material provideds by the questions and answers are all in the past.it is closely associated, as our experts in constantly update products every day to ensure the accuracy of the problem, so all Blue Prism AD01 practice materials are high accuracy. As the questions of our PECB ISO-IEC-27001-Lead-Implementer exam dumps are involved with heated issues and customers who prepare for the PECB ISO-IEC-27001-Lead-Implementer exams must haven’t enough time to keep trace of PECB ISO-IEC-27001-Lead-Implementer exams all day long. Our study materials can let users the most closed to the actual test environment simulation training, let the user valuable practice effectively on CompTIA CS0-003 practice guide, thus through the day-to-day practice, for users to develop the confidence to pass the exam. Microsoft DP-300 - The high quality and high pass rate has bbecome a reason for thousand of candidates to choose.
Updated: May 28, 2022