A good AZ-102 Valid Dumps Ebook certification must be supported by a good AZ-102 Valid Dumps Ebook exam practice, which will greatly improve your learning ability and effectiveness. Our study materials have the advantage of short time, high speed and high pass rate. You only take 20 to 30 hours to practice our AZ-102 Valid Dumps Ebook guide materials and then you can take the exam. You can browse our official websites to check our sales volumes. At the same time, many people pass the exam for the first time under the guidance of our AZ-102 Valid Dumps Ebook practice exam. Our passing rate of AZ-102 Valid Dumps Ebook study tool is very high and you needn’t worry that you have spent money and energy on them but you gain nothing.
Microsoft Azure AZ-102 How diligent they are!
At this time, you will stand out in the interview among other candidates with the AZ-102 - Microsoft Azure Administrator Certification Transition Valid Dumps Ebook certification. Once it is time to submit your exercises, the system of the Online AZ-102 Tests preparation exam will automatically finish your operation. After a several time, you will get used to finish your test on time.
Once they need to prepare an exam, our AZ-102 Valid Dumps Ebook study materials are their first choice. As you know, it is troublesome to get the AZ-102 Valid Dumps Ebookcertificate. Now, you are fortunate enough to come across our AZ-102 Valid Dumps Ebook exam guide.
Microsoft AZ-102 Valid Dumps Ebook - And you can choose the favorite one.
If you are clueless about the oncoming exam, our AZ-102 Valid Dumps Ebook guide materials are trustworthy materials for your information. More than tens of thousands of exam candidate coincide to choose our AZ-102 Valid Dumps Ebookpractice materials and passed their exam with satisfied scores, a lot of them even got full marks. According to the data that are proved and tested by our loyal customers, the pass rate of our AZ-102 Valid Dumps Ebook exam questions is high as 98% to 100%.
Many exam candidates are uninformed about the fact that our AZ-102 Valid Dumps Ebook preparation materials can help them with higher chance of getting success than others. It is all about efficiency and accuracy.
AZ-102 PDF DEMO:
QUESTION NO: 1
You plan to grant the member of a new Azure AD group named crop 75099086 the right to delegate administrative access to any resource in the resource group named 7509086.
You need to create the Azure AD group and then to assign the correct to e to the group. The solution must use the principle of least privilege and minimize the number of role assignments.
What should you do from the Azure portal?
Answer:
See explanation below.
Explanation
Step 1:
Click Resource groups from the menu of services to access the Resource Groups blade
Step 2:
Click Add (+) to create a new resource group. The Create Resource Group blade appears. Enter corp7509086 as the Resource group name, and click the Create button.
Step 3:
Select Create.
Your group is created and ready for you to add members.
Now we need to assign a role to this resource group scope.
Step 4:
Choose the newly created Resource group, and Access control (IAM) to see the current list of role assignments at the resource group scope. Click +Add to open the Add permissions pane.
Step 5:
In the Role drop-down list, select a role Delegate administration, and select Assign access to:
resource group corp7509086
References:
https://docs.microsoft.com/en-us/azure/role-based-access-control/role-assignments-portal
https://www.juniper.net/documentation/en_US/vsrx/topics/task/multi-task/security-vsrx-azure- marketplace-resou
QUESTION NO: 2
You have an Azure subscription named Subcription1 that contains a virtual network named
VNet1. VNet1 is in a resource group named RG1.
Subscription1 has a user named User1. User1 has the following roles:
* Reader
* Security Admin
* Security Reader
You need to ensure that User1 can assign the Reader role for VNet1 to other users.
What should you do?
A. Assign User1 the Owner role for VNet1
B. Assign User1 the Network Contributor role for VNet1.
C. Remove User1 from the Security Reader and Reader roles for Subscription.
D. Remove Used from the Security Reader and Reader roles for Subscription"). Assign User1 the
Contributor role for Subcription1.
Answer: A
Explanation
References:
https://docs.microsoft.com/en-us/azure/role-based-access-control/built-in-roles
QUESTION NO: 3
Overview
The following section of the exam is a lab. In this section, you will perform a set of tasks in a live environment. While most functionality will be available to you as it would be in a live environment, some functionality (e.g., copy and paste, ability to navigate to external websites) will not be possible by design.
Scoring is based on the outcome of performing the tasks stated in the lab. In other words, it doesn't matter how you accomplish the task, if you successfully perform it, you will earn credit for that task.
Labs are not timed separately, and this exam may have more than one lab that you must complete.
You can use as much time as you would like to complete each lab. But, you should manage your time appropriately to ensure that you are able to complete the lab(s) and all other sections of the exam in the time provided.
Please note that once you submit your work by clicking the Next button within a lab, you will NOT be able to return to the lab.
To start the lab
You may start the lab by clicking the Next button.
You plan to allow connections between the VNET01-USEA2 and VNET01-USWE2 virtual networks.
You need to ensure that virtual machines can communicate across both virtual networks by using their private IP address. The solution must NOT require any virtual network gateways.
What should you do from the Azure portal?
Answer:
See explanation below.
Explanation
Virtual network peering enables you to seamlessly connect two Azure virtual networks. Once peered, the virtual networks appear as one, for connectivity purposes.
Peer virtual networks
Step 1. In the Search box at the top of the Azure portal, begin typing VNET01-USEA2. When VNET01-
USEA2 appears in the search results, select it.
Step 2. Select Peerings, under SETTINGS, and then select + Add, as shown in the following picture:
Step 3. Enter, or select, the following information, accept the defaults for the remaining settings, and then select OK.
Name: myVirtualNetwork1-myVirtualNetwork2 (for example)
Subscription: elect your subscription.
Virtual network: VNET01-USWE2 - To select the VNET01-USWE2 virtual network, select Virtual network, then select VNET01-USWE2. You can select a virtual network in the same region or in a different region.
Now we need to repeat steps 1-3 for the other network VNET01-USWE2:
Step 4. In the Search box at the top of the Azure portal, begin typing VNET01- USEA2. When VNET01
- USEA2 appears in the search results, select it.
Step 5. Select Peerings, under SETTINGS, and then select + Add.
References:
https://docs.microsoft.com/en-us/azure/virtual-network/tutorial-connect-virtual-networks-portal
QUESTION NO: 4
You are troubleshooting a performance issue for an Azure Application Gateway.
You need to compare the total requests to the failed requests during the past six hours.
What should you use?
A. Connection monitor in Azure Network Watcher
B. Metrics in Application Gateway
C. NSG flow logs in Azure Network Watcher
D. Diagnostics logs in Application Gateway
Answer: B
Explanation
Application Gateway currently has seven metrics to view performance counters.
Metrics are a feature for certain Azure resources where you can view performance counters in the portal. For Application Gateway, the following metrics are available:
* Total Requests
* Failed Requests
* Current Connections
* Healthy Host Count
* Response Status
* Throughput
* Unhealthy Host count
You can filter on a per backend pool basis to show healthy/unhealthy hosts in a specific backend pool
References: https://docs.microsoft.com/en-us/azure/application-gateway/application- gatewaydiagnostics# Metrics
QUESTION NO: 5
You have an Azure subscription that is used by four departments in your company. The subscription contains
10 resource groups. Each department uses resources in several resource groups.
You need to send a report to the finance department. The report must detail the costs for each department.
Which three actions should you perform in sequence? To answer, move the appropriate actions from the list of actions to the answer area and arrange them in the correct order.
Answer:
Explanation
Box 1: Assign a tag to each resource.
You apply tags to your Azure resources giving metadata to logically organize them into a taxonomy.
After you apply tags, you can retrieve all the resources in your subscription with that tag name and value. Each resource or resource group can have a maximum of 15 tag name/value pairs. Tags applied to the resource group are not inherited by the resources in that resource group.
Box 2: From the Cost analysis blade, filter the view by tag
After you get your services running, regularly check how much they're costing you. You can see the current spend and burn rate in Azure portal.
* Visit the Subscriptions blade in Azure portal and select a subscription.
* You should see the cost breakdown and burn rate in the popup blade.
* Click Cost analysis in the list to the left to see the cost breakdown by resource. Wait 24 hours after you add a service for the data to populate.
* You can filter by different properties like tags, resource group, and timespan. Click Apply to confirm the filters and Download if you want to export the view to a Comma-Separated Values (.csv) file.
Box 3: Download the usage report
References:
https://docs.microsoft.com/en-us/azure/azure-resource-manager/resource-group-using-tags
https://docs.microsoft.com/en-us/azure/billing/billing-getting-started
After years of hard work, the experts finally developed a set of perfect learning materials Hitachi HQT-4420 practice materials that would allow the students to pass the exam easily. All intricate points of our CIW 1D0-720 study guide will not be challenging anymore. Dell D-ISAZ-A-01 study guide not only apply to students, but also apply to office workers; not only apply to veterans in the workplace, but also apply to newly recruited newcomers. So our Esri EJSA_2024 latest dumps are highly effective to make use of. Due to lots of same products in the market, maybe you have difficulty in choosing the Dell D-RPVM-A-01 guide test.
Updated: May 28, 2022