our company is determined to help provide the most accurate 70-762 New Study Guide exam questions and help more people get the 70-762 New Study Guide certificate successfully. Our company has a long history of 10 years in designing 70-762 New Study Guide study materials and enjoys a good reputation across the globe. Now we can be the leader in this exam field and have a large number of regular customers from different countries. There will be our customer service agents available 24/7 for your supports; any request for further assistance or information about 70-762 New Study Guide exam torrent will receive our immediate attention. Our 70-762 New Study Guide test prep attaches great importance to a skilled, trained and motivated workforce as well as the company’s overall performance. The numerous feedbacks from our clients proved our influence and charisma.
MCP 70-762 It is very easy and convenient to use and find.
As the employment situation becoming more and more rigorous, it’s necessary for people to acquire more 70-762 - Developing SQL Databases New Study Guide skills and knowledge when they are looking for a job. Our experts are constantly looking for creative way to immortalize our Valid 70-762 Exam Bootcamp Materials actual exam in this line. Their masterpieces are instrumental to offer help and improve your performance in the real exam.
There is an old saying goes, good memory is inferior to sodden ability to write, so we believe that it is a highly productive way for you to memory the knowledge point and review the reference books more effectively. Besides our 70-762 New Study Guide exam torrent support free demo download, as we mentioned before, it is an ideal way for you to be fully aware of our 70-762 New Study Guide prep guide and then purchasing them if suitable and satisfactory. There is no doubt that among our three different versions of 70-762 New Study Guide guide torrent, the most prevalent one is PDF version, and this is particularly suitable and welcomed by youngsters.
Our Microsoft 70-762 New Study Guide exam questions are often in short supply.
At this time, you will stand out in the interview among other candidates with the 70-762 New Study Guide certification. Constant improvement is significant to your career development. Your current achievements cannot represent your future success. Never stop advancing. Come to study our 70-762 New Study Guide learning materials. Stick to the end, victory is at hand. Action always speaks louder than words. With the help of our 70-762 New Study Guide study questions, you can reach your dream in the least time.
Once it is time to submit your exercises, the system of the 70-762 New Study Guide preparation exam will automatically finish your operation. After a several time, you will get used to finish your test on time.
70-762 PDF DEMO:
QUESTION NO: 1
You manage a database with tables named Invoice and InvoiceDetails. Each invoice may have multiple records.
Users update the InvoiceDetails table by using a .NET web application. The application retrieves records from both tables and updates the tables by running an inline update statement.
Users experience slow performance when updating records in the application. The solution must meet the following requirements:
* Must use a stored procedure.
* Must not use inline update statements
* Must use a table-valued parameter.
* Must call the stored procedure to update all records.
You need to optimize performance.
Which three actions should you perform in sequence? To answer, move the appropriate actions from the list of actions to the answer area and arrange them in the correct order.
Answer:
Explanation
Box 1: Create a user-defined table type...
Table-valued parameters are declared by using user-defined table types. You can use table-valued parameters to send multiple rows of data to a Transact-SQL statement or a routine, such as a stored procedure or function, without creating a temporary table or many parameters.
Box 2: ..read-only input parameter.
Table-valued parameters must be passed as input READONLY parameters to Transact-SQL routines.
Box 3:
Example
The following example uses Transact-SQL and shows you how to create a table-valued parameter type, declare a variable to reference it, fill the parameter list, and then pass the values to a stored procedure.
USE AdventureWorks2012;
/* Create a table type. */
CREATE TYPE LocationTableType AS TABLE
( LocationName VARCHAR(50)
, CostRate INT );
GO
/* Create a procedure to receive data for the table-valued parameter. */ CREATE PROCEDURE dbo.
usp_InsertProductionLocation
@TVP LocationTableType READONLY
Etc.
/* Declare a variable that references the type. */
DECLARE @LocationTVP AS LocationTableType;
/* Add data to the table variable. */
INSERT INTO @LocationTVP (LocationName, CostRate)
SELECT Name, 0.00
FROM AdventureWorks2012.Person.StateProvince;
/* Pass the table variable data to a stored procedure. */
EXEC usp_InsertProductionLocation @LocationTVP;
GO
References:
https://docs.microsoft.com/en-us/sql/relational-databases/tables/use-table-valued-parameters- database-engine?vie
QUESTION NO: 2
Note: This question is part of a series of questions that use the same scenario. For your convenience, the scenario is repeated in each question. Each question presents a different goal and answer choices, but the text of the scenario is exactly the same in each question in the series.
You have a database named Sales that contains the following database tables. Customer, Order, and
Products.
The Products table and the order table shown in the following diagram.
The Customer table includes a column that stores the date for the last order that the customer placed.
You plan to create a table named Leads. The Leads table is expected to contain approximately 20,000 records.
Storage requirements for the Leads table must be minimized.
You need to begin to modify the table design to adhere to third normal form.
Which column should you remove for each table? To answer? drag the appropriate column names to the correct locations. Each column name may be used once, more than once, or not at all. You may need to drag the split bar between panes or scroll to view content.
Answer:
Explanation
In the Products table the SupplierName is dependent on the SupplierID, not on the ProductID.
In the Orders table the ProductName is dependent on the ProductID, not on the OrderID.
Note:
A table is in third normal form when the following conditions are met:
* It is in second normal form.
* All non-primary fields are dependent on the primary key.
Second normal form states that it should meet all the rules for First 1Normnal Form and there must be no partial dependencies of any of the columns on the primary key.
First normal form (1NF) sets the very basic rules for an organized database:
* Define the data items required, because they become the columns in a table. Place related data items in a table.
* Ensure that there are no repeating groups of data.
* Ensure that there is a primary key.
References: https://www.tutorialspoint.com/sql/third-normal-form.htm
QUESTION NO: 3
You create tables by using the following Transact-SQL statements:
Each customer may have multiple addresses but only one is the primary address.
You must plan a solution that meets the following requirements:
* Return both customers and address information.
* Return only the primary address of the customer.
* Allow updates of all customer information and address details with the exception of the identity columns and the IsActive column.
Which three actions should you perform is sequence? To answer, move the appropriate actions from the list of actions to the answer area and arrange them in the correct order.
Answer:
QUESTION NO: 4
You have a reporting application that uses a table named Table1. You deploy a new batch update process to perform updates to Table1.
The environment is configured with the following properties:
* The database is configured with the default isolation setting.
* The application and process use the default transaction handling.
You observe the application cannot access any rows that are in use by the process.
You have the following requirements:
* Ensure the application is not blocked by the process.
* Ensure the application has a consistent view of the data
* Ensure the application does not read dirty data.
You need to resolve the issue and meet the requirements with the least amount of administrative effort.
What should you do?
A. Enable the database for the READ_COMITTED_SNAPSHOT isolation level.
B. Enable the database for the ALLOW_SNAPSHOT_ISOLATION isolation level. Modify the application and the update process for the SNAPSHOT isolation level.
C. Enable the database for the ALLOW_SNAPSHOT_ISOLATION isolation level. Modify the application for the SERIALIZABLE isolation level.
D. Enable the application for the WITH (NOLOCK) hint.
Answer: A
Explanation
Snapshot isolation must be enabled by setting the ALLOW_SNAPSHOT_ISOLATION ON database option before it is used in transactions. This activates the mechanism for storing row versions in the temporary database (tempdb).
READ COMMITTED is the default isolation level for SQL Server. It prevents dirty reads by specifying that statements cannot read data values that have been modified but not yet committed by other transactions. Other transactions can still modify, insert, or delete data between executions of individual statements within the current transaction, resulting in non-repeatable reads, or "phantom" data.
QUESTION NO: 5
You are reviewing the execution plans in the query plan cache. You observe the following:
- There are a large number of single use plans.
- There are a large number of simple execution plans that use multiple CPU cores.
You need to configure the server to optimize query plan execution.
Which two setting should you modify on the properties page for the Microsoft SQL Server instance?
To answer, select the appropriate settings in the answer area.
Answer:
Explanation
* Optimize for ad hoc workloads
The optimize for ad hoc workloads option is used to improve the efficiency of the plan cache for workloads that contain many single use ad hoc batches. When this option is set to 1, the Database
Engine stores a small compiled plan stub in the plan cache when a batch is compiled for the first time, instead of the full compiled plan. This helps to relieve memory pressure by not allowing the plan cache to become filled with compiled plans that are not reused.
* Cost Threshold for Parallelism
Use the cost threshold for parallelism option to specify the threshold at which Microsoft SQL Server creates and runs parallel plans for queries. SQL Server creates and runs a parallel plan for a query only when the estimated cost to run a serial plan for the same query is higher than the value set in cost threshold for parallelism. The cost refers to an estimated elapsed time in seconds required to run the serial plan on a specific hardware configuration.
5 means 5 seconds, but is is 5 seconds on a machine internal to Microsoft from some time in the
1990s.
There's no way to relate it to execution time on your current machine, so we treat it as a pure number now.
Raising it to 50 is a common suggestion nowadays, so that more of your simpler queries run on a single thread.
As you know, it is troublesome to get the SAP C-TS422-2023certificate. We sincerely hope that you can pay more attention to our Fortinet FCP_WCS_AD-7.4 study questions. We believe that you will pass your exam and get the related certification with SAP C_ARCIG_2404 study dump. Citrix 1Y0-204 - Life is full of ups and downs. Salesforce Salesforce-MuleSoft-Developer-II - Only through our careful inspection, the study material can be uploaded to our platform.
Updated: May 28, 2022