You can take the 70-762 Exam Vce Free training materials and pass it without any difficulty. Now is not the time to be afraid to take any more difficult 70-762 Exam Vce Free certification exams. Our 70-762 Exam Vce Free learning quiz can relieve you of the issue within limited time. The 70-762 Exam Vce Free test torrent also offer a variety of learning modes for users to choose from, which can be used for multiple clients of computers and mobile phones to study online, as well as to print and print data for offline consolidation. Our product is affordable and good, if you choose our products, we can promise that our 70-762 Exam Vce Free exam torrent will not let you down. Of course, if you encounter any problems during free trialing, feel free to contact us and we will help you to solve all problems on the 70-762 Exam Vce Free practice engine.
Come to study our 70-762 Exam Vce Free learning materials.
Once it is time to submit your exercises, the system of the 70-762 - Developing SQL Databases Exam Vce Free preparation exam will automatically finish your operation. As you know, it is troublesome to get the Reliable 70-762 Practice Questions Pptcertificate. Now, you are fortunate enough to come across our Reliable 70-762 Practice Questions Ppt exam guide.
We sincerely hope that you can pay more attention to our 70-762 Exam Vce Free study questions. Although our company has designed the best and most suitable 70-762 Exam Vce Free learn prep, we also do not stop our step to do research about the study materials. All experts and professors of our company have been trying their best to persist in innovate and developing the 70-762 Exam Vce Free test training materials all the time in order to provide the best products for all people and keep competitive in the global market.
Microsoft 70-762 Exam Vce Free - Life is full of ups and downs.
Although a lot of products are cheap, but the quality is poor, perhaps users have the same concern for our latest 70-762 Exam Vce Free exam dump. Here, we solemnly promise to users that our product error rate is zero. Everything that appears in our products has been inspected by experts. In our 70-762 Exam Vce Free practice materials, users will not even find a small error, such as spelling errors or grammatical errors. It is believed that no one is willing to buy defective products, so, the 70-762 Exam Vce Free study guide has established a strict quality control system. The entire compilation and review process for latest 70-762 Exam Vce Free exam dump has its own set of normative systems, and the 70-762 Exam Vce Free practice materials have a professional proofreader to check all content. Only through our careful inspection, the study material can be uploaded to our platform. So, please believe us, 0 error rate is our commitment.
Our payment system will automatically delete your payment information once you finish paying money for our 70-762 Exam Vce Free exam questions. Our company has built the culture of integrity from our establishment.
70-762 PDF DEMO:
QUESTION NO: 1
You manage a database with tables named Invoice and InvoiceDetails. Each invoice may have multiple records.
Users update the InvoiceDetails table by using a .NET web application. The application retrieves records from both tables and updates the tables by running an inline update statement.
Users experience slow performance when updating records in the application. The solution must meet the following requirements:
* Must use a stored procedure.
* Must not use inline update statements
* Must use a table-valued parameter.
* Must call the stored procedure to update all records.
You need to optimize performance.
Which three actions should you perform in sequence? To answer, move the appropriate actions from the list of actions to the answer area and arrange them in the correct order.
Answer:
Explanation
Box 1: Create a user-defined table type...
Table-valued parameters are declared by using user-defined table types. You can use table-valued parameters to send multiple rows of data to a Transact-SQL statement or a routine, such as a stored procedure or function, without creating a temporary table or many parameters.
Box 2: ..read-only input parameter.
Table-valued parameters must be passed as input READONLY parameters to Transact-SQL routines.
Box 3:
Example
The following example uses Transact-SQL and shows you how to create a table-valued parameter type, declare a variable to reference it, fill the parameter list, and then pass the values to a stored procedure.
USE AdventureWorks2012;
/* Create a table type. */
CREATE TYPE LocationTableType AS TABLE
( LocationName VARCHAR(50)
, CostRate INT );
GO
/* Create a procedure to receive data for the table-valued parameter. */ CREATE PROCEDURE dbo.
usp_InsertProductionLocation
@TVP LocationTableType READONLY
Etc.
/* Declare a variable that references the type. */
DECLARE @LocationTVP AS LocationTableType;
/* Add data to the table variable. */
INSERT INTO @LocationTVP (LocationName, CostRate)
SELECT Name, 0.00
FROM AdventureWorks2012.Person.StateProvince;
/* Pass the table variable data to a stored procedure. */
EXEC usp_InsertProductionLocation @LocationTVP;
GO
References:
https://docs.microsoft.com/en-us/sql/relational-databases/tables/use-table-valued-parameters- database-engine?vie
QUESTION NO: 2
Note: This question is part of a series of questions that use the same scenario. For your convenience, the scenario is repeated in each question. Each question presents a different goal and answer choices, but the text of the scenario is exactly the same in each question in the series.
You have a database named Sales that contains the following database tables. Customer, Order, and
Products.
The Products table and the order table shown in the following diagram.
The Customer table includes a column that stores the date for the last order that the customer placed.
You plan to create a table named Leads. The Leads table is expected to contain approximately 20,000 records.
Storage requirements for the Leads table must be minimized.
You need to begin to modify the table design to adhere to third normal form.
Which column should you remove for each table? To answer? drag the appropriate column names to the correct locations. Each column name may be used once, more than once, or not at all. You may need to drag the split bar between panes or scroll to view content.
Answer:
Explanation
In the Products table the SupplierName is dependent on the SupplierID, not on the ProductID.
In the Orders table the ProductName is dependent on the ProductID, not on the OrderID.
Note:
A table is in third normal form when the following conditions are met:
* It is in second normal form.
* All non-primary fields are dependent on the primary key.
Second normal form states that it should meet all the rules for First 1Normnal Form and there must be no partial dependencies of any of the columns on the primary key.
First normal form (1NF) sets the very basic rules for an organized database:
* Define the data items required, because they become the columns in a table. Place related data items in a table.
* Ensure that there are no repeating groups of data.
* Ensure that there is a primary key.
References: https://www.tutorialspoint.com/sql/third-normal-form.htm
QUESTION NO: 3
You create tables by using the following Transact-SQL statements:
Each customer may have multiple addresses but only one is the primary address.
You must plan a solution that meets the following requirements:
* Return both customers and address information.
* Return only the primary address of the customer.
* Allow updates of all customer information and address details with the exception of the identity columns and the IsActive column.
Which three actions should you perform is sequence? To answer, move the appropriate actions from the list of actions to the answer area and arrange them in the correct order.
Answer:
QUESTION NO: 4
You have a reporting application that uses a table named Table1. You deploy a new batch update process to perform updates to Table1.
The environment is configured with the following properties:
* The database is configured with the default isolation setting.
* The application and process use the default transaction handling.
You observe the application cannot access any rows that are in use by the process.
You have the following requirements:
* Ensure the application is not blocked by the process.
* Ensure the application has a consistent view of the data
* Ensure the application does not read dirty data.
You need to resolve the issue and meet the requirements with the least amount of administrative effort.
What should you do?
A. Enable the database for the READ_COMITTED_SNAPSHOT isolation level.
B. Enable the database for the ALLOW_SNAPSHOT_ISOLATION isolation level. Modify the application and the update process for the SNAPSHOT isolation level.
C. Enable the database for the ALLOW_SNAPSHOT_ISOLATION isolation level. Modify the application for the SERIALIZABLE isolation level.
D. Enable the application for the WITH (NOLOCK) hint.
Answer: A
Explanation
Snapshot isolation must be enabled by setting the ALLOW_SNAPSHOT_ISOLATION ON database option before it is used in transactions. This activates the mechanism for storing row versions in the temporary database (tempdb).
READ COMMITTED is the default isolation level for SQL Server. It prevents dirty reads by specifying that statements cannot read data values that have been modified but not yet committed by other transactions. Other transactions can still modify, insert, or delete data between executions of individual statements within the current transaction, resulting in non-repeatable reads, or "phantom" data.
QUESTION NO: 5
You are reviewing the execution plans in the query plan cache. You observe the following:
- There are a large number of single use plans.
- There are a large number of simple execution plans that use multiple CPU cores.
You need to configure the server to optimize query plan execution.
Which two setting should you modify on the properties page for the Microsoft SQL Server instance?
To answer, select the appropriate settings in the answer area.
Answer:
Explanation
* Optimize for ad hoc workloads
The optimize for ad hoc workloads option is used to improve the efficiency of the plan cache for workloads that contain many single use ad hoc batches. When this option is set to 1, the Database
Engine stores a small compiled plan stub in the plan cache when a batch is compiled for the first time, instead of the full compiled plan. This helps to relieve memory pressure by not allowing the plan cache to become filled with compiled plans that are not reused.
* Cost Threshold for Parallelism
Use the cost threshold for parallelism option to specify the threshold at which Microsoft SQL Server creates and runs parallel plans for queries. SQL Server creates and runs a parallel plan for a query only when the estimated cost to run a serial plan for the same query is higher than the value set in cost threshold for parallelism. The cost refers to an estimated elapsed time in seconds required to run the serial plan on a specific hardware configuration.
5 means 5 seconds, but is is 5 seconds on a machine internal to Microsoft from some time in the
1990s.
There's no way to relate it to execution time on your current machine, so we treat it as a pure number now.
Raising it to 50 is a common suggestion nowadays, so that more of your simpler queries run on a single thread.
In general, users can only wait about 5-10 minutes to receive our EMC D-PE-OE-23 learning material, and if there are any problems with the reception, users may contact our staff at any time. Therefore, the effect of the user using the latest CIW 1D0-724 exam dump is the only standard for proving the effectiveness and usefulness of our products. Our trial version of our SAP C-ARSUM-2404 study materials can be a good solution to this problem. NAHP NRCMA - This may be the best chance to climb the top of your life. VMware 3V0-61.24 - We can confidently say that our products are leading in the products of the same industry.
Updated: May 28, 2022