And our expert team updates the 70-410 Test Questions Fee study guide frequently to let the clients practice more. So the quality of our 70-410 Test Questions Fee practice materials is very high and we can guarantee to you that you will have few difficulties to pass the exam. To let the clients be familiar with the atmosphere and pace of the real 70-410 Test Questions Fee exam we provide the function of stimulating the exam. We have installed the most advanced operation system in our company which can assure you the fastest delivery speed on our 70-410 Test Questions Fee learning guide, you can get immediately our 70-410 Test Questions Fee training materials only within five to ten minutes after purchase after payment. At the same time, there is really no need for you to worry about your personal information if you choose to buy the 70-410 Test Questions Fee exam practice from our company. Such a startling figure --99% pass rate is not common in this field, but we have made it with our endless efforts.
Windows Server 2012 70-410 Action always speaks louder than words.
If you are satisfied with our 70-410 - Installing and Configuring Windows Server 2012 Test Questions Fee training guide, come to choose and purchase. As you know, it is troublesome to get the 70-410 Download Democertificate. Now, you are fortunate enough to come across our 70-410 Download Demo exam guide.
All experts and professors of our company have been trying their best to persist in innovate and developing the 70-410 Test Questions Fee test training materials all the time in order to provide the best products for all people and keep competitive in the global market. We believe that the study materials will keep the top selling products. We sincerely hope that you can pay more attention to our 70-410 Test Questions Fee study questions.
Microsoft 70-410 Test Questions Fee - Life is full of ups and downs.
Although a lot of products are cheap, but the quality is poor, perhaps users have the same concern for our latest 70-410 Test Questions Fee exam dump. Here, we solemnly promise to users that our product error rate is zero. Everything that appears in our products has been inspected by experts. In our 70-410 Test Questions Fee practice materials, users will not even find a small error, such as spelling errors or grammatical errors. It is believed that no one is willing to buy defective products, so, the 70-410 Test Questions Fee study guide has established a strict quality control system. The entire compilation and review process for latest 70-410 Test Questions Fee exam dump has its own set of normative systems, and the 70-410 Test Questions Fee practice materials have a professional proofreader to check all content. Only through our careful inspection, the study material can be uploaded to our platform. So, please believe us, 0 error rate is our commitment.
You just need to pay the relevant money for the 70-410 Test Questions Fee practice materials. Our system will never deduct extra money from your debit cards.
70-410 PDF DEMO:
QUESTION NO: 1
Your network contains an Active Directory domain named contoso.com. The domain contains
100 servers.
The servers are contained in an organizational unit (OU) named Servers OU.
You need to create a group named Group1 on all of the servers in the domain. You must ensure that
Group1 is added only to the servers.
What should you configure?
A. a Local Users and Groups preferences setting in a Group Policy linked to the Domain Controllers
OU
B. a Restricted Groups setting in a Group Policy linked to the domain
C. a Local Users and Groups preferences setting in a Group Policy linked to ServersOU
D. a Restricted Groups setting in a Group Policy linked to Servers OU
Answer: C
Explanation
A. This would add the group to the wrong OU
B. This would affect the whole domain and would effect member of the group
C. allows you to centrally manage local users and groups on domain member computers and is this is the correct OU for the GPO change
D. Restricted Groups defines what member or groups should exist as part of a group Why use Group
Policy preferences?
Unlike Group Policy settings, which App1y to both local computer policy and Active Directory policy,
Group Policy preferences only App1y to Active Directory policy.
You use preferences to configure many areas of the OS, including:
System devices, such as USB ports, floppy drives and removable media Network shares and mapping network shares to drive letters System and user environment variables User and group accounts for the local computer VPN and dial-up networking connections Printer configuration and mapping
Registry settings, schedule tasks and system services Settings for Folder Options, Internet Options and Regional and Language Options Settings for power schemes and power management Start Menu properties and menu items
QUESTION NO: 2
You have three servers named Server1, Server2, and DC1 that run Windows Server 2012 R2.
IPv6 addresses and configurations are assigned to all of the servers by using DHCPv6.
The IPv6 routing on Server1 is shown in the following table.
You verify that Server2 can ping the IPv6 address of DC1.
You need to ensure that Server1 can ping the IPv6 address of DC1.
What command should you run on Server1? (To answer, select the appropriate options in the answer area.)
Answer:
Explanation
Before a routing table is used, the destination cache is checked for an entry matching the destination address in the packet being forwarded. If the destination cache does not contain an entry for the destination address, the routing table is used to determine:
The next-hop address - For a direct delivery (in which the destination is on a local link), the next-hop address is the destination address in the packet. For an indirect delivery (in which the destination is not on a local link), the next-hop address is the address of a router.
The next-hop interface - The interface identifies the physical or logical interface that is used to forward the packet either to its destination or to the next router.
Reference: http://technet.microsoft.com/en-us/library/dd379520%28v=WS.10%29.aspx
QUESTION NO: 3
You have a Hyper-V host named Server1 that runs Windows Server 2012 R2. Server1 hosts 40 virtual machines that run Windows Server 2008 R2. The virtual machines connect to a private virtual switch.
You have a file that you want to copy to all of the virtual machines.
You need to identify to which servers you can copy files by using the Copy-VmFile cmdlet.
What command should you run? To answer, select the appropriate options in the answer area.
Answer:
Explanation
QUESTION NO: 4
Your network contains an Active Directory domain named contoso.com. The domain contains a server named Server1. Server1 runs Windows Server 2012 R2.
You need to create a 3-TB virtual hard disk (VHD) on Server1.
Which tool should you use?
A. Computer Management
B. Server Manager
C. Share and Storage Management
D. New-VirtualDisk
Answer: A
Explanation
For other questions to create a VHD (file) you can use computer management.
- Share and storage management (2008 only)
- New-storagesubsystemVirtualDisk (this is a virtual disk, NOT a virtual hard disk)
- Server Manager (you would use this to create virtual disks, not virtual hard disks)
QUESTION NO: 5
In an isolated test environment, you deploy a server named Server1 that runs a Server Core
Installation of Windows Server 2012 R2. The test environment does not have Active Directory
Domain Services (AD DS) installed.
You install the Active Directory Domain Services server role on Server1.
You need to configure Server1 as a domain controller.
Which cmdlet should you run?
A. Install-ADDSDomainController
B. Install-ADDSDomain
C. Install-ADDSForest
D. Install-WindowsFeature
Answer: C
Explanation
Install-ADDSDomainController - Installs a domain controller in Active Directory.
Install-ADDSDomain - Installs a new Active Directory domain configuration.
Install-ADDSForest - Installs a new Active Directory forest configuration.
Install-WindowsFeature - Installs one or more Windows Server roles, role services, or features on either the local or a specified remote server that is running Windows Server 2012 R2. This cmdlet is equivalent to and replaces Add-WindowsFeature, the cmdlet that was used to install roles, role services, and features.
C:\PS>Install-ADDSForest -DomainName corp.contoso.com -CreateDNSDelegation DomainMode
Win2008 - ForestMode Win 2008 R2 -DatabasePath "d:\NTDS" -SysvolPath "d:\SYSVOL" -LogPath
"e:\Logs"Installs a new forest named corp.contoso.com, creates a DNS delegation in the contoso.com domain, sets domain functional level to Windows Server 2008 R2 and sets forest functional level to
Windows Server 2008,installs the Active Directory database and SYSVOL on the D:\ drive, installs the log files on the E:\ drive and has the server automatically restart after AD DS installation is complete and prompts the user to provide and confirm the Directory Services Restore Mode (DSRM) password.
In general, users can only wait about 5-10 minutes to receive our Microsoft MB-280 learning material, and if there are any problems with the reception, users may contact our staff at any time. Based on the statistics, prepare the exams under the guidance of our Microsoft AZ-104-KR practice materials, the user's pass rate is up to 98% to 100%, And they only need to practice latest Microsoft AZ-104-KR exam dump to hours. Juniper JN0-252 - In the current market, there are too many products of the same type. SAP C-DBADM-2404 - According to different audience groups, our products for the examination of the teaching content of a careful division, so that every user can find a suitable degree of learning materials. Someone around you must be using our Fortinet NSE7_EFW-7.2 exam questions.
Updated: May 28, 2022