When you suspect your level of knowledge, and cramming before the exam, do you think of how to pass the Microsoft 70-410 Latest Test Review exam with confidence? Do not worry, Omgzlook is the only provider of training materials that can help you to pass the exam. Our training materials, including questions and answers, the pass rate can reach 100%. With Omgzlook Microsoft 70-410 Latest Test Review exam training materials, you can begin your first step forward. Our 70-410 Latest Test Review practice guide well received by the general public for immediately after you have made a purchase for our 70-410 Latest Test Review exam prep, you can download our 70-410 Latest Test Review study materials to make preparations for the exams. It is universally acknowledged that time is a key factor in terms of the success of exams. The SOFT version simulates the real exam which will give you more realistic feeling.
Windows Server 2012 70-410 It is unmarched high as 98% to 100%.
Windows Server 2012 70-410 Latest Test Review - Installing and Configuring Windows Server 2012 Chance favors the prepared mind. To ensure that you have a more comfortable experience before you choose to purchase our Exam 70-410 Sims exam quiz, we provide you with a trial experience service. Once you decide to purchase our Exam 70-410 Sims learning materials, we will also provide you with all-day service.
Before you try to attend the 70-410 Latest Test Review practice exam, you need to look for best learning materials to easily understand the key points of 70-410 Latest Test Review exam prep. There are 70-410 Latest Test Review real questions available for our candidates with accurate answers and detailed explanations. We are ready to show you the most reliable 70-410 Latest Test Review pdf vce and the current exam information for your preparation of the test.
The way to pass the Microsoft 70-410 Latest Test Review actual test is diverse.
In order to meet the requirements of our customers, Our 70-410 Latest Test Review test questions carefully designed the automatic correcting system for customers. It is known to us that practicing the incorrect questions is very important for everyone, so our 70-410 Latest Test Review exam question provide the automatic correcting system to help customers understand and correct the errors. If you want to improve your correct rates of exam, we believe the best method is inscribed according to the fault namely this in appearing weak sports, specific aim ground consolidates knowledge is nodded. Our 70-410 Latest Test Review guide torrent will help you establish the error sets. We believe that it must be very useful for you to take your exam, and it is necessary for you to use our 70-410 Latest Test Review test questions.
70-410 Latest Test Review online test engine can simulate the actual test, which will help you familiar with the environment of the 70-410 Latest Test Review real test. The 70-410 Latest Test Review self-assessment features can bring you some convenience.
70-410 PDF DEMO:
QUESTION NO: 1
Your network contains a server named Server1 that runs Windows Server 2012 R2. Server1 has the Hyper-V server role installed.
Server1 hosts four virtual machines named VM1, VM2, VM3, and VM4.
Server1 is configured as shown in the following table.
VM2 sends and receives large amounts of data over the network.
You need to ensure that the network traffic of VM2 bypasses the virtual switches of the parent partition.
What should you configure?
A. NUMA topology
B. Resource control
C. resource metering
D. virtual Machine Chimney
E. The VLAN ID
F. Processor Compatibility
G. The startup order
H. Automatic Start Action
I. Integration Services
J. Port mirroring
K. Single-root I/O virtualization
Answer: K
Explanation
Single-root I/O virtualization -capable network adapters can be assigned directly to a virtual machine to maximize network throughput while minimizing network latency and the CPU overhead required for processing network traffic.
References: http://technet.microsoft.com/en-us/library/cc766320(v=ws.10).aspx
http://technet.microsoft.com/en-us/library/hh831410.aspx
Exam Ref 70-410, Installing and Configuring Windows Server 2012 R2, Chapter 3: Configure Hyper-V,
Objective 3.1: Create and Configure virtual machine settings, p.144 Training Guide: Installing and
Configuring Windows Server 2012 R2: Chapter 7: Hyper-V Virtualization, Lesson 2: Deploying and configuring virtual machines, p.335
QUESTION NO: 2
You have a Hyper-V host named Server1 that runs Windows Server 2012 R2.
Server1 hosts several virtual machines. Each virtual machine has two network adapters. Server1 contains several virtual switches.
On Server1, you create a NIC team that has two network adapters.
You discover that the NIC team is set to Static Teaming mode.
You need to modify the NIC teaming mode to Switch Independent.
Which cmdlet should you use?
A. Set-VMNetworkAdapter
B. Set-NetLbfoTeam
C. Set-NetLbfoTeamNic
D. Set-VMSwitch
Answer: B
Explanation
The Set-NetLbfoTeam cmdlet sets the TeamingMode or LoadBalancingAlgorithm parameters on the specified NIC team.
Example: Set the teaming mode
This command sets the teaming mode of the team named Team1 to LACP.
Windows PowerShell
PS C:\> Set-NetLbfoTeam -Name Team1 -TeamingMode LACP
Reference: Set-NetLbfoTeam
https://technet.microsoft.com/en-us/library/jj130844(v=wps.630).aspx
QUESTION NO: 3
You have a server named Server1 that runs Windows Server 2012 R2. Server1 has the Hyper-V server role installed. Server1 has 8 GB of RAM.
Server1 hosts five virtual machines that run Windows Server 2012 R2.
The settings of a virtual machine named Server3 are configured as shown in the exhibit. (Click the
Exhibit button.)
You need to ensure that when Server1 restarts, Server3 automatically resumes without intervention.
The solution must prevent data loss.
Which settings should you modify?
A. BIOS
B. Automatic Start Action
C. Automatic Stop Action
D. Integration Services
Answer: C
Explanation
The Automatic Stop Action setting should be modified because it will allow you to configure:
"Save the virtual machine state" option instructs Hyper-V Virtual Machine Management Service to save the virtual machine state on the local disk when the Hyper-V Server shuts down.
OR "Turn Off the virtual machine" is used by the Hyper-V Management Service (VMMS.exe) to gracefully turn off the virtual machine.
OR "Shut down the guest operating system" is successful only if the "Hyper-V Shutdown" guest service is running in the virtual machine. The guest service is required to be running in the virtual machine as the Hyper-V VMMS.EXE process will trigger Windows Exit message which is received by the service. Once the message is received by the guest service, it takes the necessary actions to shut down the virtual machine.
Reference: http://www.altaro.com/hyper-v/hyper-v-automatic-start-and-stop-action/
QUESTION NO: 4
You work as an administrator at Contoso.com. The Contoso.com network consists of a single domain named Contoso.com.
Contoso.com has a Windows Server 2012 R2 domain controller, named ENSUREPASS-DC01, which has the Domain Naming master and the Schema master roles installed. Contoso.com also has a
Windows Server 2008 R2 domain controller, named ENSUREPASS-DC02, which has the PDC Emulator,
RID master, and Infrastructure master roles installed.
You have deployed a new Windows Server 2012 server, which belongs to a workgroup, in
Contoso.com's perimeter network.
You then executed the djoin.exe command.
Which of the following is the purpose of the djoin.exe command?
A. It sets up a computer account in a domain and requests an offline domain join when a computer restarts.
B. It sets up a user account in a domain and requests an online domain join when a computer restarts.
C. It sets up a computer account in a domain and requests an offline domain join immediately.
D. It sets up a computer account in a domain and requests an online domain join immediately.
Answer: A
QUESTION NO: 5
Your network contains one Active Directory domain named contoso.com. The domain contains
10 domain controllers and a read-only domain controller (RODC) named RODC01.
You plan to replace a domain controller named DC1. DC1 has the schema operations master role.
You need to transfer the schema master role to another domain controller named DC10 before you remove Active Directory from DC1.
Which tool should you use?
A. the ntdsutil command
B. the Set-ADDomain cmdlet
C. the Install-ADDSDomain cmdlet
D. the dsadd command
E. the dsamain command
F. the dsmgmt command
G. the net user command
H. the Set-ADForest cmdlet
Answer: A
Explanation
To transfer the schema master role using the command line:
* Open Command Prompt.
* Type:
ntdsutil
* At the ntdsutil command prompt, type:
roles
* At the fsmo maintenance command prompt, type:
connection
* At the server connections command prompt, type:
connect to serverDomainController
* At the server connections command prompt, type:
quit
* At the fsmo maintenance command prompt, type:
transfer schema master
Reference: Transfer the schema master role
All IBM C1000-101-KR training engine can cater to each type of exam candidates’ preferences. Microsoft Fortinet NSE5_FSM-6.3 certification exam is a high demand exam tests in IT field because it proves your ability and professional technology. VMware 3V0-31.24 - We are willing to help you solve your all problem. Salesforce B2C-Commerce-Architect - It is so cool even to think about it. And you are lucky to find us for we are the most popular vendor in this career and have a strong strength on providing the best SAP C_BW4H_2404 study materials.
Updated: May 28, 2022