Our Microsoft 70-410 Exam Dumps Free test braindump will be definitely useful for your test and 100% valid. Money Back Guaranteed! A bold attempt is half success. Now we would like to share the advantages of our 70-410 Exam Dumps Free study dump to you, we hope you can spend several minutes on reading our introduction; you will benefit a lot from it. Our Installing and Configuring Windows Server 2012 exam questions are designed by a reliable and reputable company and our company has rich experience in doing research about the study materials. Our 70-410 Exam Dumps Free vce dumps offer you the best exam preparation materials which are updated regularly to keep the latest exam requirement.
70-410 Exam Dumps Free study material is suitable for all people.
Besides, our company's website purchase process holds security guarantee, so you needn’t be anxious about download and install our 70-410 - Installing and Configuring Windows Server 2012 Exam Dumps Free exam questions. So a wise and diligent person should absorb more knowledge when they are still young. At present, our 70-410 Test Prep study prep has gained wide popularity among different age groups.
Considering all customers’ sincere requirements, 70-410 Exam Dumps Free test question persist in the principle of “Quality First and Clients Supreme” all along and promise to our candidates with plenty of high-quality products, considerate after-sale services as well as progressive management ideas. Numerous advantages of 70-410 Exam Dumps Free training materials are well-recognized, such as 99% pass rate in the exam, free trial before purchasing, secure privacy protection and so forth. From the customers’ point of view, our 70-410 Exam Dumps Free test question put all candidates’ demands as the top priority.
Microsoft 70-410 Exam Dumps Free - So you can take a best preparation for the exam.
Every detail of our 70-410 Exam Dumps Free exam guide is going through professional evaluation and test. Other workers are also dedicated to their jobs. Even the proofreading works of the 70-410 Exam Dumps Free study materials are complex and difficult. They still attentively accomplish their tasks. Please have a try and give us an opportunity. Our 70-410 Exam Dumps Free preparation quide will totally amaze you and bring you good luck. And it deserves you to have a try!
Omgzlook's training tool has strong pertinence, which can help you save a lot of valuable time and energy to pass IT certification exam. Our exercises and answers and are very close true examination questions.
70-410 PDF DEMO:
QUESTION NO: 1
You have a server named Server1 that runs Windows Server 2012 R2. Server1 has the Hyper-V server role installed. Server1 has 8 GB of RAM.
Server1 hosts five virtual machines that run Windows Server 2012 R2.
The settings of a virtual machine named Server3 are configured as shown in the exhibit. (Click the
Exhibit button.)
You need to ensure that when Server1 restarts, Server3 automatically resumes without intervention.
The solution must prevent data loss.
Which settings should you modify?
A. BIOS
B. Automatic Start Action
C. Automatic Stop Action
D. Integration Services
Answer: C
Explanation
The Automatic Stop Action setting should be modified because it will allow you to configure:
"Save the virtual machine state" option instructs Hyper-V Virtual Machine Management Service to save the virtual machine state on the local disk when the Hyper-V Server shuts down.
OR "Turn Off the virtual machine" is used by the Hyper-V Management Service (VMMS.exe) to gracefully turn off the virtual machine.
OR "Shut down the guest operating system" is successful only if the "Hyper-V Shutdown" guest service is running in the virtual machine. The guest service is required to be running in the virtual machine as the Hyper-V VMMS.EXE process will trigger Windows Exit message which is received by the service. Once the message is received by the guest service, it takes the necessary actions to shut down the virtual machine.
Reference: http://www.altaro.com/hyper-v/hyper-v-automatic-start-and-stop-action/
QUESTION NO: 2
Your network contains a server named Server1 that runs Windows Server 2012 R2. Server1 has the Hyper-V server role installed.
Server1 hosts four virtual machines named VM1, VM2, VM3, and VM4.
Server1 is configured as shown in the following table.
VM2 sends and receives large amounts of data over the network.
You need to ensure that the network traffic of VM2 bypasses the virtual switches of the parent partition.
What should you configure?
A. NUMA topology
B. Resource control
C. resource metering
D. virtual Machine Chimney
E. The VLAN ID
F. Processor Compatibility
G. The startup order
H. Automatic Start Action
I. Integration Services
J. Port mirroring
K. Single-root I/O virtualization
Answer: K
Explanation
Single-root I/O virtualization -capable network adapters can be assigned directly to a virtual machine to maximize network throughput while minimizing network latency and the CPU overhead required for processing network traffic.
References: http://technet.microsoft.com/en-us/library/cc766320(v=ws.10).aspx
http://technet.microsoft.com/en-us/library/hh831410.aspx
Exam Ref 70-410, Installing and Configuring Windows Server 2012 R2, Chapter 3: Configure Hyper-V,
Objective 3.1: Create and Configure virtual machine settings, p.144 Training Guide: Installing and
Configuring Windows Server 2012 R2: Chapter 7: Hyper-V Virtualization, Lesson 2: Deploying and configuring virtual machines, p.335
QUESTION NO: 3
You have a Hyper-V host named Server1 that runs Windows Server 2012 R2.
Server1 hosts several virtual machines. Each virtual machine has two network adapters. Server1 contains several virtual switches.
On Server1, you create a NIC team that has two network adapters.
You discover that the NIC team is set to Static Teaming mode.
You need to modify the NIC teaming mode to Switch Independent.
Which cmdlet should you use?
A. Set-VMNetworkAdapter
B. Set-NetLbfoTeam
C. Set-NetLbfoTeamNic
D. Set-VMSwitch
Answer: B
Explanation
The Set-NetLbfoTeam cmdlet sets the TeamingMode or LoadBalancingAlgorithm parameters on the specified NIC team.
Example: Set the teaming mode
This command sets the teaming mode of the team named Team1 to LACP.
Windows PowerShell
PS C:\> Set-NetLbfoTeam -Name Team1 -TeamingMode LACP
Reference: Set-NetLbfoTeam
https://technet.microsoft.com/en-us/library/jj130844(v=wps.630).aspx
QUESTION NO: 4
You work as an administrator at Contoso.com. The Contoso.com network consists of a single domain named Contoso.com.
Contoso.com has a Windows Server 2012 R2 domain controller, named ENSUREPASS-DC01, which has the Domain Naming master and the Schema master roles installed. Contoso.com also has a
Windows Server 2008 R2 domain controller, named ENSUREPASS-DC02, which has the PDC Emulator,
RID master, and Infrastructure master roles installed.
You have deployed a new Windows Server 2012 server, which belongs to a workgroup, in
Contoso.com's perimeter network.
You then executed the djoin.exe command.
Which of the following is the purpose of the djoin.exe command?
A. It sets up a computer account in a domain and requests an offline domain join when a computer restarts.
B. It sets up a user account in a domain and requests an online domain join when a computer restarts.
C. It sets up a computer account in a domain and requests an offline domain join immediately.
D. It sets up a computer account in a domain and requests an online domain join immediately.
Answer: A
QUESTION NO: 5
Your network contains one Active Directory domain named contoso.com. The domain contains
10 domain controllers and a read-only domain controller (RODC) named RODC01.
You plan to replace a domain controller named DC1. DC1 has the schema operations master role.
You need to transfer the schema master role to another domain controller named DC10 before you remove Active Directory from DC1.
Which tool should you use?
A. the ntdsutil command
B. the Set-ADDomain cmdlet
C. the Install-ADDSDomain cmdlet
D. the dsadd command
E. the dsamain command
F. the dsmgmt command
G. the net user command
H. the Set-ADForest cmdlet
Answer: A
Explanation
To transfer the schema master role using the command line:
* Open Command Prompt.
* Type:
ntdsutil
* At the ntdsutil command prompt, type:
roles
* At the fsmo maintenance command prompt, type:
connection
* At the server connections command prompt, type:
connect to serverDomainController
* At the server connections command prompt, type:
quit
* At the fsmo maintenance command prompt, type:
transfer schema master
Reference: Transfer the schema master role
Our ISACA CISM-CN study materials absolutely can add more pleasure to your life. Microsoft AZ-104-KR - These training products to help you pass the exam, we guarantee to refund the full purchase cost. If you attach great importance to the protection of personal information and want to choose a very high security product, Lpi 300-300 real exam is definitely your first choice. ServiceNow CIS-VR - But they need a lot of time to participate in the certification exam training courses. SAP C-HRHFC-2405 - Each of us is dreaming of being the best, but only a few people take that crucial step.
Updated: May 28, 2022