70-410 Exam Camp Free & 70-410 Reliable New Exam Format - New 70-410 Practice Exam Online - Omgzlook

About the upcoming 70-410 Exam Camp Free exam, do you have mastered the key parts which the exam will test up to now? Everyone is conscious of the importance and only the smart one with smart way can make it. Maybe you are unfamiliar with our 70-410 Exam Camp Free latest material, but our 70-410 Exam Camp Free real questions are applicable to this exam with high passing rate up to 98 percent and over. Our experts generalize the knowledge of the exam into our 70-410 Exam Camp Free exam materials showing in three versions. PDF version of 70-410 Exam Camp Free study questions - support customers' printing request, and allow you to have a print and practice in papers. If you are clueless about the oncoming exam, our 70-410 Exam Camp Free guide materials are trustworthy materials for your information.

Windows Server 2012 70-410 It is all about efficiency and accuracy.

Windows Server 2012 70-410 Exam Camp Free - Installing and Configuring Windows Server 2012 With our study materials, you only need 20-30 hours of study to successfully pass the exam and reach the peak of your career. All intricate points of our Reliable Study Questions 70-410 Free study guide will not be challenging anymore. They are harbingers of successful outcomes.

70-410 Exam Camp Free study guide not only apply to students, but also apply to office workers; not only apply to veterans in the workplace, but also apply to newly recruited newcomers. 70-410 Exam Camp Free guide torrent uses a very simple and understandable language, to ensure that all people can read and understand. Are you still feeling distressed for expensive learning materials? Are you still struggling with complicated and difficult explanations in textbooks? Do you still hesitate in numerous tutorial materials? 70-410 Exam Camp Free study guide can help you to solve all these questions.

Microsoft 70-410 Exam Camp Free - Omgzlook guarantee 100% success.

Nowadays, online shopping has been greatly developed, but because of the fear of some uncontrollable problems after payment, there are still many people don't trust to buy things online, especially electronic products. But you don't have to worry about this when buying our 70-410 Exam Camp Free actual exam. Not only will we fully consider for customers before and during the purchase on our 70-410 Exam Camp Free practice guide, but we will also provide you with warm and thoughtful service on the 70-410 Exam Camp Free training guide.

If you find any quality problems of our 70-410 Exam Camp Free or you do not pass the exam, we will unconditionally full refund. Omgzlook is professional site that providing Microsoft 70-410 Exam Camp Free questions and answers , it covers almost the 70-410 Exam Camp Free full knowledge points.

70-410 PDF DEMO:

QUESTION NO: 1
Your network contains a file server named Server1 that runs Windows Server 2012 R2. All client computers run Windows 8. Server1 contains a folder named Folder1. Folder1 contains the installation files for the company's desktop applications. A network technician shares Folder1 as
Share 1.
You need to ensure that the share for Folder1 is not visible when users browse the network.
What should you do?
A. From the properties of Folder1, deny the List Folder Contents permission for the Everyone group.
B. From the properties of Folder1, remove Share1, and then share Folder1 as Share1$.
C. From the properties of Folder1, configure the hidden attribute.
D. From the properties of Share1, configure access-based enumeration
Answer: B

QUESTION NO: 2
You have a server named Server1 that runs Windows Server 2012 R2. Server1 has the Hyper-V server role installed. Server1 has 8 GB of RAM.
Server1 hosts five virtual machines that run Windows Server 2012 R2.
The settings of a virtual machine named Server3 are configured as shown in the exhibit. (Click the
Exhibit button.)
You need to ensure that when Server1 restarts, Server3 automatically resumes without intervention.
The solution must prevent data loss.
Which settings should you modify?
A. BIOS
B. Automatic Start Action
C. Automatic Stop Action
D. Integration Services
Answer: C
Explanation
The Automatic Stop Action setting should be modified because it will allow you to configure:
"Save the virtual machine state" option instructs Hyper-V Virtual Machine Management Service to save the virtual machine state on the local disk when the Hyper-V Server shuts down.
OR "Turn Off the virtual machine" is used by the Hyper-V Management Service (VMMS.exe) to gracefully turn off the virtual machine.
OR "Shut down the guest operating system" is successful only if the "Hyper-V Shutdown" guest service is running in the virtual machine. The guest service is required to be running in the virtual machine as the Hyper-V VMMS.EXE process will trigger Windows Exit message which is received by the service. Once the message is received by the guest service, it takes the necessary actions to shut down the virtual machine.
Reference: http://www.altaro.com/hyper-v/hyper-v-automatic-start-and-stop-action/

QUESTION NO: 3
Your network contains a server named Server1 that runs Windows Server 2012 R2. Server1 has the Hyper-V server role installed.
Server1 hosts four virtual machines named VM1, VM2, VM3, and VM4.
Server1 is configured as shown in the following table.
VM2 sends and receives large amounts of data over the network.
You need to ensure that the network traffic of VM2 bypasses the virtual switches of the parent partition.
What should you configure?
A. NUMA topology
B. Resource control
C. resource metering
D. virtual Machine Chimney
E. The VLAN ID
F. Processor Compatibility
G. The startup order
H. Automatic Start Action
I. Integration Services
J. Port mirroring
K. Single-root I/O virtualization
Answer: K
Explanation
Single-root I/O virtualization -capable network adapters can be assigned directly to a virtual machine to maximize network throughput while minimizing network latency and the CPU overhead required for processing network traffic.
References: http://technet.microsoft.com/en-us/library/cc766320(v=ws.10).aspx
http://technet.microsoft.com/en-us/library/hh831410.aspx
Exam Ref 70-410, Installing and Configuring Windows Server 2012 R2, Chapter 3: Configure Hyper-V,
Objective 3.1: Create and Configure virtual machine settings, p.144 Training Guide: Installing and
Configuring Windows Server 2012 R2: Chapter 7: Hyper-V Virtualization, Lesson 2: Deploying and configuring virtual machines, p.335

QUESTION NO: 4
You have a Hyper-V host named Server1 that runs Windows Server 2012 R2.
Server1 hosts several virtual machines. Each virtual machine has two network adapters. Server1 contains several virtual switches.
On Server1, you create a NIC team that has two network adapters.
You discover that the NIC team is set to Static Teaming mode.
You need to modify the NIC teaming mode to Switch Independent.
Which cmdlet should you use?
A. Set-VMNetworkAdapter
B. Set-NetLbfoTeam
C. Set-NetLbfoTeamNic
D. Set-VMSwitch
Answer: B
Explanation
The Set-NetLbfoTeam cmdlet sets the TeamingMode or LoadBalancingAlgorithm parameters on the specified NIC team.
Example: Set the teaming mode
This command sets the teaming mode of the team named Team1 to LACP.
Windows PowerShell
PS C:\> Set-NetLbfoTeam -Name Team1 -TeamingMode LACP
Reference: Set-NetLbfoTeam
https://technet.microsoft.com/en-us/library/jj130844(v=wps.630).aspx

QUESTION NO: 5
You work as an administrator at Contoso.com. The Contoso.com network consists of a single domain named Contoso.com.
Contoso.com has a Windows Server 2012 R2 domain controller, named ENSUREPASS-DC01, which has the Domain Naming master and the Schema master roles installed. Contoso.com also has a
Windows Server 2008 R2 domain controller, named ENSUREPASS-DC02, which has the PDC Emulator,
RID master, and Infrastructure master roles installed.
You have deployed a new Windows Server 2012 server, which belongs to a workgroup, in
Contoso.com's perimeter network.
You then executed the djoin.exe command.
Which of the following is the purpose of the djoin.exe command?
A. It sets up a computer account in a domain and requests an offline domain join when a computer restarts.
B. It sets up a user account in a domain and requests an online domain join when a computer restarts.
C. It sets up a computer account in a domain and requests an offline domain join immediately.
D. It sets up a computer account in a domain and requests an online domain join immediately.
Answer: A

Our free demos of our EMC D-PCM-DY-23 learning questions will help you know our study materials comprehensively. SASInstitute A00-415 - Omgzlook has been to make the greatest efforts to provide the best and most convenient service for our candidates. EMC D-PEMX-DY-23 - We have shown the rest two versions on our website. ATLASSIAN ACP-120 - Never say you can not do it. Just have a try on our GAQM CSCM-001 practice guide, then you will know you can succeed.

Updated: May 28, 2022