If you buy our RH-202 Test Braindumps preparation questions, you can use our RH-202 Test Braindumps practice engine for study in anytime and anywhere. If you feel that you always suffer from procrastination and cannot make full use of your spare time, maybe our RH-202 Test Braindumps study materials can help you solve your problem. We are willing to recommend you to try the RH-202 Test Braindumps learning guide from our company. In order to cater to the different needs of people from different countries in the international market, we have prepared three kinds of versions of our RH-202 Test Braindumps learning questions in this website. And we can assure you that you will get the latest version of our RH-202 Test Braindumps training materials for free from our company in the whole year after payment on RH-202 Test Braindumps practice quiz. Most of them give us feedback that they have learned a lot from our RH-202 Test Braindumps exam guide and think it has a lifelong benefit.
Red Hat Certification RH-202 This is a fair principle.
By browsing this website, all there versions of our RH-202 - Redhat Certified Technician on Redhat Enterprise Linux 5 (Labs) Test Braindumps pratice engine can be chosen according to your taste or preference. On the other hand, our RH-202 Test Preparation test guides also focus on key knowledge and points that are difficult to understand to help customers better absorb knowledge. Only when you personally experience our RH-202 Test Preparation qualification test can you better feel the benefits of our products.
Though the content of these three versions of our RH-202 Test Braindumps study questions is the same, their displays are totally different. And you can be surprised to find that our RH-202 Test Braindumps learning quiz is developed with the latest technologies as well. Up to now, there are three versions of RH-202 Test Braindumps exam materials for your choice.
RedHat RH-202 Test Braindumps - You must make a decision as soon as possible!
If we waste a little bit of time, we will miss a lot of opportunities. If we miss the opportunity, we will accomplish nothing. Then, life becomes meaningless. Our RH-202 Test Braindumps preparation exam have taken this into account, so in order to save our customer’s precious time, the experts in our company did everything they could to prepare our RH-202 Test Braindumps study materials for those who need to improve themselves quickly in a short time to pass the exam to get the RH-202 Test Braindumps certification.
If you follow the steps of our RH-202 Test Braindumps exam questions, you can easily and happily learn and ultimately succeed in the ocean of learning. Next, I will detail the relevant information of our learning materials so that you can have a better understanding of our RH-202 Test Braindumps guide training.
RH-202 PDF DEMO:
QUESTION NO: 1
swapon /dev/hda? To enable the Swap space from partition.
QUESTION NO: 2
free -m Verify Either Swap is enabled or not.
QUESTION NO: 3
mkswap /dev/hda? To create Swap File system on partition.
QUESTION NO: 4
Verify by mounting on current Sessions also:
mount /dev/hda? /data
5. You are new System Administrator and from now you are going to handle the system and your main task is Network monitoring, Backup and Restore. But you don't know the root password. Change the root password to redhat and login in default Runlevel.
Answer and Explanation:
When you Boot the System, it starts on default Runlevel specified in /etc/inittab: Id:?:initdefault:
When System Successfully boot, it will ask for username and password. But you don't know the root's password. To change the root password you need to boot the system into single user mode. You can pass the kernel arguments from the boot loader.
1. Restart the System.
2. You will get the boot loader GRUB screen.
3. Press a and type 1 or s for single mode ro root=LABEL=/ rhgb queit s
4. System will boot on Single User mode.
5. Use passwd command to change.
6. Press ctrl+d
6. There are more then 400 Computers in your Office. You are appointed as a System Administrator. But you don't have Router. So, you are going to use your One Linux Server as a Router. How will you enable
IP packets forward?
Answer and Explanation:
1. /proc is the virtual filesystem, we use /proc to modify the kernel parameters at running time.
# echo "1" >/proc/sys/net/ipv4/ip_forward
2. /etc/sysctl.conf when System Reboot on next time, /etc/rc.d/rc.sysinit scripts reads the file
/etc/sysctl.conf. To enable the IP forwarding on next reboot also you need to set the parameter. net.ipv4.ip_forward=1
Here 0 means disable, 1 means enable.
7. You Completely Install the Redhat Enterprise Linux ES 4 on your System. While start the system, it's giving error to load X window System. How will you fix that problem and make boot successfully run X
Window System.
Answer and Explanation:
Think while Problems occurred on booting System on Runlevel 5 (X Window).
1. /tmp is full or not
2. Quota is already reached
3. Video card or resolution or monitor is misconfigured.
4. xfs service is running or not.
Do These:
1. df -h /tmp /tmp is full remove the unnecessary file
2. quota username if quota is already reached remove unnecessary file from home directory.
3. Boot the System in runlevel 3. you can pass the Kernel Argument from boot loader.
4. Use command: system-config-display It will display a dialog to configure the monitor, Video card, resolution etc.
5. Set the Default Runlevel 5 in /etc/inittab id:5:initdefault:
6. Reboot the System you will get the GUI login Screen.
8. There are two different networks, 192.168.0.0/24 and 192.168.1.0/24. Your System is in 192.168.0.0/24
Network. One RHEL 4 Installed System is going to use as a Router. All required configuration is already done on Linux Server. Where 192.168.0.254 and 192.168.1.254 IP Address are assigned on that Server.
How will make successfully ping to 192.168.1.0/24 Network's Host?
Answer:
1. vi /etc/sysconfig/network
GATEWAY=192.168.0.254
OR
vi /etc/sysconf/network-scripts/ifcfg-eth0
DEVICE=eth0
BOOTPROTO=static
ONBOOT=yes
IPADDR=192.168.0.?
NETMASK=255.255.255.0
GATEWAY=192.168.0.254
2. service network restart
Explanation: Gateway defines the way to exit the packets. According to question System working as a router for two networks have IP Address 192.168.0.254 and 192.168.1.254. To get the hosts on
192.168.1.0/24 should go through 192.168.0.254.
9. Make a swap partition having 100MB. Make Automatically Usable at System Boot Time.
Answer and Explanation:
1. Use fdisk /dev/hda To create new partition.
2. Type n For New partition
3. It will ask for Logical or Primary Partitions. Press l for logical.
4. It will ask for the Starting Cylinder: Use the Default by pressing Enter Key.
5. Type the Size: +100M You can Specify either Last cylinder of Size here.
6. Press P to verify the partitions lists and remember the partitions name.
Default System ID is 83 that means Linux Native.
7. Type t to change the System ID of partition.
8. Type Partition Number
9. Type 82 that means Linux Swap.
10. Press w to write on partitions table.
11. Either Reboot or use partprobe command.
QUESTION NO: 5
vi /etc/fstab
Write:
/dev/hda? /data ext3 defaults 1 2
Fortinet NSE5_FSM-6.3 - The clients can use the shortest time to prepare the exam and the learning only costs 20-30 hours. Microsoft MS-102 - We just want to provide you with the best service. Once their classmates or colleagues need to prepare an exam, they will soon introduce them to choose our Microsoft PL-500-CN study materials. Huawei H19-402_V1.0 - We are reliable and trustable in this career for more than ten years. But our Google Cloud-Digital-Leader study guide will offer you the most professional guidance.
Updated: May 27, 2022