Our products have a cost-effective, and provide one year free update. Our certification training materials are all readily available. Our website is a leading supplier of the answers to dump. There is no doubt they are clear-cut and easy to understand to fulfill your any confusion about the exam. Our Redhat Certified Technician on Redhat Enterprise Linux 5 (Labs) exam question is applicable to all kinds of exam candidates who eager to pass the exam. The Omgzlook RedHat RH-202 Test Blueprint exam questions and answers is the real exam challenges, and help you change your mindset.
Red Hat Certification RH-202 The strength of Omgzlook is embodied in it.
Red Hat Certification RH-202 Test Blueprint - Redhat Certified Technician on Redhat Enterprise Linux 5 (Labs) Our experts have many years’ experience in this particular line of business, together with meticulous and professional attitude towards jobs. We can help you pass the RedHat Latest RH-202 Exam Questions exam smoothly. In order not to let success pass you by, do it quickly.
And we can always give you the most professional services on our RH-202 Test Blueprint training guide. Our RH-202 Test Blueprint practice questions enjoy great popularity in this line. We provide our RH-202 Test Blueprint exam braindumps on the superior quality and being confident that they will help you expand your horizon of knowledge of the exam.
RedHat RH-202 Test Blueprint - At last, you will not regret your choice.
we can give you 100% pass rate guarantee. RH-202 Test Blueprint practice quiz is equipped with a simulated examination system with timing function, allowing you to examine your RH-202 Test Blueprint learning results at any time, keep checking for defects, and improve your strength. Besides, during the period of using RH-202 Test Blueprint learning guide, we also provide you with 24 hours of free online services, which help to solve any problem for you at any time and sometimes mean a lot to our customers.
Through our short-term special training You can quickly grasp IT professional knowledge, and then have a good preparation for your exam. We promise that we will do our best to help you pass the RedHat certification RH-202 Test Blueprint exam.
RH-202 PDF DEMO:
QUESTION NO: 1
Verify by mounting on current Sessions also:
mount /dev/hda? /data
5. You are new System Administrator and from now you are going to handle the system and your main task is Network monitoring, Backup and Restore. But you don't know the root password. Change the root password to redhat and login in default Runlevel.
Answer and Explanation:
When you Boot the System, it starts on default Runlevel specified in /etc/inittab: Id:?:initdefault:
When System Successfully boot, it will ask for username and password. But you don't know the root's password. To change the root password you need to boot the system into single user mode. You can pass the kernel arguments from the boot loader.
1. Restart the System.
2. You will get the boot loader GRUB screen.
3. Press a and type 1 or s for single mode ro root=LABEL=/ rhgb queit s
4. System will boot on Single User mode.
5. Use passwd command to change.
6. Press ctrl+d
6. There are more then 400 Computers in your Office. You are appointed as a System Administrator. But you don't have Router. So, you are going to use your One Linux Server as a Router. How will you enable
IP packets forward?
Answer and Explanation:
1. /proc is the virtual filesystem, we use /proc to modify the kernel parameters at running time.
# echo "1" >/proc/sys/net/ipv4/ip_forward
2. /etc/sysctl.conf when System Reboot on next time, /etc/rc.d/rc.sysinit scripts reads the file
/etc/sysctl.conf. To enable the IP forwarding on next reboot also you need to set the parameter. net.ipv4.ip_forward=1
Here 0 means disable, 1 means enable.
7. You Completely Install the Redhat Enterprise Linux ES 4 on your System. While start the system, it's giving error to load X window System. How will you fix that problem and make boot successfully run X
Window System.
Answer and Explanation:
Think while Problems occurred on booting System on Runlevel 5 (X Window).
1. /tmp is full or not
2. Quota is already reached
3. Video card or resolution or monitor is misconfigured.
4. xfs service is running or not.
Do These:
1. df -h /tmp /tmp is full remove the unnecessary file
2. quota username if quota is already reached remove unnecessary file from home directory.
3. Boot the System in runlevel 3. you can pass the Kernel Argument from boot loader.
4. Use command: system-config-display It will display a dialog to configure the monitor, Video card, resolution etc.
5. Set the Default Runlevel 5 in /etc/inittab id:5:initdefault:
6. Reboot the System you will get the GUI login Screen.
8. There are two different networks, 192.168.0.0/24 and 192.168.1.0/24. Your System is in 192.168.0.0/24
Network. One RHEL 4 Installed System is going to use as a Router. All required configuration is already done on Linux Server. Where 192.168.0.254 and 192.168.1.254 IP Address are assigned on that Server.
How will make successfully ping to 192.168.1.0/24 Network's Host?
Answer:
1. vi /etc/sysconfig/network
GATEWAY=192.168.0.254
OR
vi /etc/sysconf/network-scripts/ifcfg-eth0
DEVICE=eth0
BOOTPROTO=static
ONBOOT=yes
IPADDR=192.168.0.?
NETMASK=255.255.255.0
GATEWAY=192.168.0.254
2. service network restart
Explanation: Gateway defines the way to exit the packets. According to question System working as a router for two networks have IP Address 192.168.0.254 and 192.168.1.254. To get the hosts on
192.168.1.0/24 should go through 192.168.0.254.
9. Make a swap partition having 100MB. Make Automatically Usable at System Boot Time.
Answer and Explanation:
1. Use fdisk /dev/hda To create new partition.
2. Type n For New partition
3. It will ask for Logical or Primary Partitions. Press l for logical.
4. It will ask for the Starting Cylinder: Use the Default by pressing Enter Key.
5. Type the Size: +100M You can Specify either Last cylinder of Size here.
6. Press P to verify the partitions lists and remember the partitions name.
Default System ID is 83 that means Linux Native.
7. Type t to change the System ID of partition.
8. Type Partition Number
9. Type 82 that means Linux Swap.
10. Press w to write on partitions table.
11. Either Reboot or use partprobe command.
QUESTION NO: 2
vi /etc/fstab
Write:
/dev/hda? /data ext3 defaults 1 2
QUESTION NO: 3
Use mkfs -t ext3 /dev/hda?
Or
mke2fs -j /dev/hda? To create ext3 filesystem.
QUESTION NO: 4
mkswap /dev/hda? To create Swap File system on partition.
QUESTION NO: 5
Either Reboot or use partprobe command.
Google Cloud-Digital-Leader - By clearing different RedHat exams, you can easily land your dream job. Huawei H12-621_V1.0 - We will provide one year free update service for those customers who choose Omgzlook's products. Our Microsoft MB-910 exam questions zre up to date, and we provide user-friendly Microsoft MB-910 practice test software for the Microsoft MB-910 exam. Microsoft SC-100 - As most of our exam questions are updated monthly, you will get the best resources with market-fresh quality and reliability assurance. They provide you a swift understanding of the key points of Huawei H11-851_V4.0 covered under the syllabus contents.
Updated: May 27, 2022