Dear customers, if you are prepared to take the exam with the help of excellent RH-202 Study Plan learning materials on our website, the choice is made brilliant. Our RH-202 Study Plan training materials are your excellent choices, especially helpful for those who want to pass the exam without bountiful time and eager to get through it successfully. Let us take a try of our amazing RH-202 Study Plan exam questions and know the advantages first! There is considerate and concerted cooperation for your purchasing experience on our RH-202 Study Plan exam braindumpsaccompanied with patient staff with amity. You can find RH-202 Study Plan simulating questions on our official website, and we will deal with everything once your place your order. Advertisements can be faked, but the scores of the students cannot be falsified.
Red Hat Certification RH-202 As we all know, time and tide waits for no man.
With the high pass rate of our RH-202 - Redhat Certified Technician on Redhat Enterprise Linux 5 (Labs) Study Plan exam questions as 98% to 100% which is unbeatable in the market, we are proud to say that we have helped tens of thousands of our customers achieve their dreams and got their RH-202 - Redhat Certified Technician on Redhat Enterprise Linux 5 (Labs) Study Plan certifications. Excellent guidance is indispensable. If you urgently need help, come to buy our study materials.
Our RH-202 Study Plan certification questions are close to the real exam and the questions and answers of the test bank cover the entire syllabus of the real exam and all the important information about the exam. Our RH-202 Study Plan learning dump can stimulate the real exam’s environment to make the learners be personally on the scene and help the learners adjust the speed when they attend the real exam. To be convenient for the learners, our RH-202 Study Plan certification questions provide the test practice software to help the learners check their learning results at any time.
RedHat RH-202 Study Plan - You can spend more time doing other things.
our RH-202 Study Plan study materials will also save your time and energy in well-targeted learning as we are going to make everything done in order that you can stay focused in learning our RH-202 Study Plan study materials without worries behind. We are so honored and pleased to be able to read our detailed introduction and we will try our best to enable you a better understanding of our RH-202 Study Plan study materials better.
Most importantly, these continuously updated systems are completely free to users. As long as our RH-202 Study Plan learning material updated, users will receive the most recent information from our RH-202 Study Plan learning materials.
RH-202 PDF DEMO:
QUESTION NO: 1
free -m Verify Either Swap is enabled or not.
QUESTION NO: 2
swapon /dev/hda? To enable the Swap space from partition.
QUESTION NO: 3
mkswap /dev/hda? To create Swap File system on partition.
QUESTION NO: 4
Verify by mounting on current Sessions also:
mount /dev/hda? /data
5. You are new System Administrator and from now you are going to handle the system and your main task is Network monitoring, Backup and Restore. But you don't know the root password. Change the root password to redhat and login in default Runlevel.
Answer and Explanation:
When you Boot the System, it starts on default Runlevel specified in /etc/inittab: Id:?:initdefault:
When System Successfully boot, it will ask for username and password. But you don't know the root's password. To change the root password you need to boot the system into single user mode. You can pass the kernel arguments from the boot loader.
1. Restart the System.
2. You will get the boot loader GRUB screen.
3. Press a and type 1 or s for single mode ro root=LABEL=/ rhgb queit s
4. System will boot on Single User mode.
5. Use passwd command to change.
6. Press ctrl+d
6. There are more then 400 Computers in your Office. You are appointed as a System Administrator. But you don't have Router. So, you are going to use your One Linux Server as a Router. How will you enable
IP packets forward?
Answer and Explanation:
1. /proc is the virtual filesystem, we use /proc to modify the kernel parameters at running time.
# echo "1" >/proc/sys/net/ipv4/ip_forward
2. /etc/sysctl.conf when System Reboot on next time, /etc/rc.d/rc.sysinit scripts reads the file
/etc/sysctl.conf. To enable the IP forwarding on next reboot also you need to set the parameter. net.ipv4.ip_forward=1
Here 0 means disable, 1 means enable.
7. You Completely Install the Redhat Enterprise Linux ES 4 on your System. While start the system, it's giving error to load X window System. How will you fix that problem and make boot successfully run X
Window System.
Answer and Explanation:
Think while Problems occurred on booting System on Runlevel 5 (X Window).
1. /tmp is full or not
2. Quota is already reached
3. Video card or resolution or monitor is misconfigured.
4. xfs service is running or not.
Do These:
1. df -h /tmp /tmp is full remove the unnecessary file
2. quota username if quota is already reached remove unnecessary file from home directory.
3. Boot the System in runlevel 3. you can pass the Kernel Argument from boot loader.
4. Use command: system-config-display It will display a dialog to configure the monitor, Video card, resolution etc.
5. Set the Default Runlevel 5 in /etc/inittab id:5:initdefault:
6. Reboot the System you will get the GUI login Screen.
8. There are two different networks, 192.168.0.0/24 and 192.168.1.0/24. Your System is in 192.168.0.0/24
Network. One RHEL 4 Installed System is going to use as a Router. All required configuration is already done on Linux Server. Where 192.168.0.254 and 192.168.1.254 IP Address are assigned on that Server.
How will make successfully ping to 192.168.1.0/24 Network's Host?
Answer:
1. vi /etc/sysconfig/network
GATEWAY=192.168.0.254
OR
vi /etc/sysconf/network-scripts/ifcfg-eth0
DEVICE=eth0
BOOTPROTO=static
ONBOOT=yes
IPADDR=192.168.0.?
NETMASK=255.255.255.0
GATEWAY=192.168.0.254
2. service network restart
Explanation: Gateway defines the way to exit the packets. According to question System working as a router for two networks have IP Address 192.168.0.254 and 192.168.1.254. To get the hosts on
192.168.1.0/24 should go through 192.168.0.254.
9. Make a swap partition having 100MB. Make Automatically Usable at System Boot Time.
Answer and Explanation:
1. Use fdisk /dev/hda To create new partition.
2. Type n For New partition
3. It will ask for Logical or Primary Partitions. Press l for logical.
4. It will ask for the Starting Cylinder: Use the Default by pressing Enter Key.
5. Type the Size: +100M You can Specify either Last cylinder of Size here.
6. Press P to verify the partitions lists and remember the partitions name.
Default System ID is 83 that means Linux Native.
7. Type t to change the System ID of partition.
8. Type Partition Number
9. Type 82 that means Linux Swap.
10. Press w to write on partitions table.
11. Either Reboot or use partprobe command.
QUESTION NO: 5
vi /etc/fstab
Write:
/dev/hda? /data ext3 defaults 1 2
On Omgzlook website you can free download part of the exam questions and answers about RedHat certification Microsoft MB-335 exam to quiz our reliability. By visit our website, the user can obtain an experimental demonstration, free after the user experience can choose the most appropriate and most favorite Microsoft DP-100 exam questions download. EMC D-VXR-DS-00 - If you do not have participated in a professional specialized training course, you need to spend a lot of time and effort to prepare for the exam. USGBC LEED-AP-ND - Just image that you will have a lot of the opportunities to be employed by bigger and better company, and you will get a better position and a higher income. ACAMS CAMS-CN - If you choose Omgzlook, we promise that we will try our best to help you pass the exam and also provide you with one year free update service.
Updated: May 27, 2022