All contents of RH-202 Sample Online training prep are made by elites in this area rather than being fudged by laymen. Let along the reasonable prices of our RH-202 Sample Online exam materials which attracted tens of thousands of exam candidates mesmerized by their efficiency by proficient helpers of our company. Any difficult posers will be solved by our RH-202 Sample Online quiz guide. Within one year, we will send the latest version to your mailbox with no charge if we have a new version of RH-202 Sample Online learning materials. We will also provide some discount for your updating after a year if you are satisfied with our RH-202 Sample Online exam questions. Whenever you encounter any RH-202 Sample Online problems in the learning process, you can email us and we will help you to solve them immediately.
Red Hat Certification RH-202 Nowadays, it is hard to find a desirable job.
Red Hat Certification RH-202 Sample Online - Redhat Certified Technician on Redhat Enterprise Linux 5 (Labs) It is more and more important for us to keep pace with the changeable world and improve ourselves for the beautiful life. Luckily, we are going to tell you a good new that the demo of the RH-202 Valid Exam Pattern study materials are easily available in our company. If you buy the study materials from our company, we are glad to offer you with the best demo of our study materials.
Why not have a try? Our RH-202 Sample Online exam questions are related to test standards and are made in the form of actual tests. Whether you are newbie or experienced exam candidates, our RH-202 Sample Online study guide will relieve you of tremendous pressure and help you conquer the difficulties with efficiency.
RedHat RH-202 Sample Online - You must make a decision as soon as possible!
If we waste a little bit of time, we will miss a lot of opportunities. If we miss the opportunity, we will accomplish nothing. Then, life becomes meaningless. Our RH-202 Sample Online preparation exam have taken this into account, so in order to save our customer’s precious time, the experts in our company did everything they could to prepare our RH-202 Sample Online study materials for those who need to improve themselves quickly in a short time to pass the exam to get the RH-202 Sample Online certification.
If you are agonizing about how to pass the exam and to get the RedHat certificate, now you can try our learning materials. Our reputation is earned by high-quality of our learning materials.
RH-202 PDF DEMO:
QUESTION NO: 1
swapon /dev/hda? To enable the Swap space from partition.
QUESTION NO: 2
mkswap /dev/hda? To create Swap File system on partition.
QUESTION NO: 3
Verify by mounting on current Sessions also:
mount /dev/hda? /data
5. You are new System Administrator and from now you are going to handle the system and your main task is Network monitoring, Backup and Restore. But you don't know the root password. Change the root password to redhat and login in default Runlevel.
Answer and Explanation:
When you Boot the System, it starts on default Runlevel specified in /etc/inittab: Id:?:initdefault:
When System Successfully boot, it will ask for username and password. But you don't know the root's password. To change the root password you need to boot the system into single user mode. You can pass the kernel arguments from the boot loader.
1. Restart the System.
2. You will get the boot loader GRUB screen.
3. Press a and type 1 or s for single mode ro root=LABEL=/ rhgb queit s
4. System will boot on Single User mode.
5. Use passwd command to change.
6. Press ctrl+d
6. There are more then 400 Computers in your Office. You are appointed as a System Administrator. But you don't have Router. So, you are going to use your One Linux Server as a Router. How will you enable
IP packets forward?
Answer and Explanation:
1. /proc is the virtual filesystem, we use /proc to modify the kernel parameters at running time.
# echo "1" >/proc/sys/net/ipv4/ip_forward
2. /etc/sysctl.conf when System Reboot on next time, /etc/rc.d/rc.sysinit scripts reads the file
/etc/sysctl.conf. To enable the IP forwarding on next reboot also you need to set the parameter. net.ipv4.ip_forward=1
Here 0 means disable, 1 means enable.
7. You Completely Install the Redhat Enterprise Linux ES 4 on your System. While start the system, it's giving error to load X window System. How will you fix that problem and make boot successfully run X
Window System.
Answer and Explanation:
Think while Problems occurred on booting System on Runlevel 5 (X Window).
1. /tmp is full or not
2. Quota is already reached
3. Video card or resolution or monitor is misconfigured.
4. xfs service is running or not.
Do These:
1. df -h /tmp /tmp is full remove the unnecessary file
2. quota username if quota is already reached remove unnecessary file from home directory.
3. Boot the System in runlevel 3. you can pass the Kernel Argument from boot loader.
4. Use command: system-config-display It will display a dialog to configure the monitor, Video card, resolution etc.
5. Set the Default Runlevel 5 in /etc/inittab id:5:initdefault:
6. Reboot the System you will get the GUI login Screen.
8. There are two different networks, 192.168.0.0/24 and 192.168.1.0/24. Your System is in 192.168.0.0/24
Network. One RHEL 4 Installed System is going to use as a Router. All required configuration is already done on Linux Server. Where 192.168.0.254 and 192.168.1.254 IP Address are assigned on that Server.
How will make successfully ping to 192.168.1.0/24 Network's Host?
Answer:
1. vi /etc/sysconfig/network
GATEWAY=192.168.0.254
OR
vi /etc/sysconf/network-scripts/ifcfg-eth0
DEVICE=eth0
BOOTPROTO=static
ONBOOT=yes
IPADDR=192.168.0.?
NETMASK=255.255.255.0
GATEWAY=192.168.0.254
2. service network restart
Explanation: Gateway defines the way to exit the packets. According to question System working as a router for two networks have IP Address 192.168.0.254 and 192.168.1.254. To get the hosts on
192.168.1.0/24 should go through 192.168.0.254.
9. Make a swap partition having 100MB. Make Automatically Usable at System Boot Time.
Answer and Explanation:
1. Use fdisk /dev/hda To create new partition.
2. Type n For New partition
3. It will ask for Logical or Primary Partitions. Press l for logical.
4. It will ask for the Starting Cylinder: Use the Default by pressing Enter Key.
5. Type the Size: +100M You can Specify either Last cylinder of Size here.
6. Press P to verify the partitions lists and remember the partitions name.
Default System ID is 83 that means Linux Native.
7. Type t to change the System ID of partition.
8. Type Partition Number
9. Type 82 that means Linux Swap.
10. Press w to write on partitions table.
11. Either Reboot or use partprobe command.
QUESTION NO: 4
vi /etc/fstab
Write:
/dev/hda? /data ext3 defaults 1 2
QUESTION NO: 5
free -m Verify Either Swap is enabled or not.
IBM C1000-180 - Commonly speaking, people like the in-service staff or the students are busy and don’t have enough time to prepare the exam. Huawei H19-431_V1.0 - We just want to provide you with the best service. Our Microsoft AZ-900-KR training guide has been well known in the market. We understand you can have more chances getting higher salary or acceptance instead of preparing for the ISACA CISA-KR exam. But our HP HPE7-A01 study guide will offer you the most professional guidance.
Updated: May 27, 2022