Passing a RH-202 Questions Ebook exam to get a certificate will help you to look for a better job and get a higher salary. If you are tired of finding a high quality study material, we suggest that you should try our RH-202 Questions Ebook exam prep. Because our materials not only has better quality than any other same learn products, but also can guarantee that you can pass the RH-202 Questions Ebook exam with ease. When you are preparing RH-202 Questions Ebook practice exam, it is necessary to grasp the overall knowledge points of real exam by using the latest RH-202 Questions Ebook pass guide. Our experts written the accurate RH-202 Questions Ebook test answers for exam preparation and created the study guideline for our candidates. You will love our RH-202 Questions Ebook exam questions as long as you have a try!
Red Hat Certification RH-202 There is no doubt that you can get a great grade.
You can also try the simulated exam environment with RH-202 - Redhat Certified Technician on Redhat Enterprise Linux 5 (Labs) Questions Ebook software on PC. So we have adamant attitude to offer help rather than perfunctory attitude. All RH-202 Valid Test Braindumps test prep is made without levity and the passing rate has up to 98 to 100 percent now.
In a word, our RH-202 Questions Ebook exam questions have built good reputation in the market. We sincerely hope that you can try our RH-202 Questions Ebook learning quiz. You will surely benefit from your correct choice.
RedHat RH-202 Questions Ebook - It is very easy and convenient to use and find.
As the employment situation becoming more and more rigorous, it’s necessary for people to acquire more RH-202 Questions Ebook skills and knowledge when they are looking for a job. Enterprises and institutions often raise high acquirement for massive candidates, and aim to get the best quality talents. Thus a high-quality RH-202 Questions Ebook certification will be an outstanding advantage, especially for the employees, which may double your salary, get you a promotion. So choose us, choose a brighter future.
Being dedicated to these practice materials painstakingly and pooling useful points into our RH-202 Questions Ebook exam materials with perfect arrangement and scientific compilation of messages, our RH-202 Questions Ebook practice materials can propel the exam candidates to practice with efficiency. Our experts are constantly looking for creative way to immortalize our RH-202 Questions Ebook actual exam in this line.
RH-202 PDF DEMO:
QUESTION NO: 1
vi /etc/fstab
Write:
/dev/hda? /data ext3 defaults 1 2
QUESTION NO: 2
Use mkfs -t ext3 /dev/hda?
Or
mke2fs -j /dev/hda? To create ext3 filesystem.
QUESTION NO: 3
Verify by mounting on current Sessions also:
mount /dev/hda? /data
5. You are new System Administrator and from now you are going to handle the system and your main task is Network monitoring, Backup and Restore. But you don't know the root password. Change the root password to redhat and login in default Runlevel.
Answer and Explanation:
When you Boot the System, it starts on default Runlevel specified in /etc/inittab: Id:?:initdefault:
When System Successfully boot, it will ask for username and password. But you don't know the root's password. To change the root password you need to boot the system into single user mode. You can pass the kernel arguments from the boot loader.
1. Restart the System.
2. You will get the boot loader GRUB screen.
3. Press a and type 1 or s for single mode ro root=LABEL=/ rhgb queit s
4. System will boot on Single User mode.
5. Use passwd command to change.
6. Press ctrl+d
6. There are more then 400 Computers in your Office. You are appointed as a System Administrator. But you don't have Router. So, you are going to use your One Linux Server as a Router. How will you enable
IP packets forward?
Answer and Explanation:
1. /proc is the virtual filesystem, we use /proc to modify the kernel parameters at running time.
# echo "1" >/proc/sys/net/ipv4/ip_forward
2. /etc/sysctl.conf when System Reboot on next time, /etc/rc.d/rc.sysinit scripts reads the file
/etc/sysctl.conf. To enable the IP forwarding on next reboot also you need to set the parameter. net.ipv4.ip_forward=1
Here 0 means disable, 1 means enable.
7. You Completely Install the Redhat Enterprise Linux ES 4 on your System. While start the system, it's giving error to load X window System. How will you fix that problem and make boot successfully run X
Window System.
Answer and Explanation:
Think while Problems occurred on booting System on Runlevel 5 (X Window).
1. /tmp is full or not
2. Quota is already reached
3. Video card or resolution or monitor is misconfigured.
4. xfs service is running or not.
Do These:
1. df -h /tmp /tmp is full remove the unnecessary file
2. quota username if quota is already reached remove unnecessary file from home directory.
3. Boot the System in runlevel 3. you can pass the Kernel Argument from boot loader.
4. Use command: system-config-display It will display a dialog to configure the monitor, Video card, resolution etc.
5. Set the Default Runlevel 5 in /etc/inittab id:5:initdefault:
6. Reboot the System you will get the GUI login Screen.
8. There are two different networks, 192.168.0.0/24 and 192.168.1.0/24. Your System is in 192.168.0.0/24
Network. One RHEL 4 Installed System is going to use as a Router. All required configuration is already done on Linux Server. Where 192.168.0.254 and 192.168.1.254 IP Address are assigned on that Server.
How will make successfully ping to 192.168.1.0/24 Network's Host?
Answer:
1. vi /etc/sysconfig/network
GATEWAY=192.168.0.254
OR
vi /etc/sysconf/network-scripts/ifcfg-eth0
DEVICE=eth0
BOOTPROTO=static
ONBOOT=yes
IPADDR=192.168.0.?
NETMASK=255.255.255.0
GATEWAY=192.168.0.254
2. service network restart
Explanation: Gateway defines the way to exit the packets. According to question System working as a router for two networks have IP Address 192.168.0.254 and 192.168.1.254. To get the hosts on
192.168.1.0/24 should go through 192.168.0.254.
9. Make a swap partition having 100MB. Make Automatically Usable at System Boot Time.
Answer and Explanation:
1. Use fdisk /dev/hda To create new partition.
2. Type n For New partition
3. It will ask for Logical or Primary Partitions. Press l for logical.
4. It will ask for the Starting Cylinder: Use the Default by pressing Enter Key.
5. Type the Size: +100M You can Specify either Last cylinder of Size here.
6. Press P to verify the partitions lists and remember the partitions name.
Default System ID is 83 that means Linux Native.
7. Type t to change the System ID of partition.
8. Type Partition Number
9. Type 82 that means Linux Swap.
10. Press w to write on partitions table.
11. Either Reboot or use partprobe command.
QUESTION NO: 4
Either Reboot or use partprobe command.
QUESTION NO: 5
mkswap /dev/hda? To create Swap File system on partition.
VMware 2V0-31.24 - There is an old saying goes, good memory is inferior to sodden ability to write, so we believe that it is a highly productive way for you to memory the knowledge point and review the reference books more effectively. SAP C_THR88_2405 exam questions can fuel your speed and help you achieve your dream. So without doubt, our ISTQB CTAL-TTA exam questions are always the latest and valid. Microsoft PL-500-CN - It is easy for you to pass the exam because you only need 20-30 hours to learn and prepare for the exam. So if you are in a dark space, our SAP C_S4CPR_2408 exam questions can inspire you make great improvements.
Updated: May 27, 2022