After your payment is successful, you will receive an e-mail from our system within 5-10 minutes, and then, you can use high-quality RH-202 Prep Material exam guide to learn immediately. Everyone knows that time is very important and hopes to learn efficiently, especially for those who have taken a lot of detours and wasted a lot of time. The sooner you download and use RH-202 Prep Material training materials the sooner you get the RH-202 Prep Material certificate. With the company of our RH-202 Prep Material study dumps, you will find the direction of success. There is nothing more exciting than an effective and useful RH-202 Prep Material question bank to study with for your coming exam. There is no chance of losing the exam if you rely on RH-202 Prep Material study guides.
Red Hat Certification RH-202 The knowledge you have learned is priceless.
You can much more benefited form our RH-202 - Redhat Certified Technician on Redhat Enterprise Linux 5 (Labs) Prep Material study guide. To choose us is to choose success! It is an incredible opportunity among all candidates fighting for the desirable exam outcome to have our RH-202 New Braindumps Files practice materials.
But the RH-202 Prep Material test prep we provide are compiled elaborately and it makes you use less time and energy to learn and provide the study materials of high quality and seizes the focus the exam. It lets you master the most information and costs you the least time and energy. The RH-202 Prep Material prep torrent we provide will cost you less time and energy.
RedHat RH-202 Prep Material - You must make a decision as soon as possible!
If we waste a little bit of time, we will miss a lot of opportunities. If we miss the opportunity, we will accomplish nothing. Then, life becomes meaningless. Our RH-202 Prep Material preparation exam have taken this into account, so in order to save our customer’s precious time, the experts in our company did everything they could to prepare our RH-202 Prep Material study materials for those who need to improve themselves quickly in a short time to pass the exam to get the RH-202 Prep Material certification.
Next, I will detail the relevant information of our learning materials so that you can have a better understanding of our RH-202 Prep Material guide training. Our RH-202 Prep Material study tool prepared by our company has now been selected as the secret weapons of customers who wish to pass the exam and obtain relevant certification.
RH-202 PDF DEMO:
QUESTION NO: 1
swapon /dev/hda? To enable the Swap space from partition.
QUESTION NO: 2
mkswap /dev/hda? To create Swap File system on partition.
QUESTION NO: 3
Verify by mounting on current Sessions also:
mount /dev/hda? /data
5. You are new System Administrator and from now you are going to handle the system and your main task is Network monitoring, Backup and Restore. But you don't know the root password. Change the root password to redhat and login in default Runlevel.
Answer and Explanation:
When you Boot the System, it starts on default Runlevel specified in /etc/inittab: Id:?:initdefault:
When System Successfully boot, it will ask for username and password. But you don't know the root's password. To change the root password you need to boot the system into single user mode. You can pass the kernel arguments from the boot loader.
1. Restart the System.
2. You will get the boot loader GRUB screen.
3. Press a and type 1 or s for single mode ro root=LABEL=/ rhgb queit s
4. System will boot on Single User mode.
5. Use passwd command to change.
6. Press ctrl+d
6. There are more then 400 Computers in your Office. You are appointed as a System Administrator. But you don't have Router. So, you are going to use your One Linux Server as a Router. How will you enable
IP packets forward?
Answer and Explanation:
1. /proc is the virtual filesystem, we use /proc to modify the kernel parameters at running time.
# echo "1" >/proc/sys/net/ipv4/ip_forward
2. /etc/sysctl.conf when System Reboot on next time, /etc/rc.d/rc.sysinit scripts reads the file
/etc/sysctl.conf. To enable the IP forwarding on next reboot also you need to set the parameter. net.ipv4.ip_forward=1
Here 0 means disable, 1 means enable.
7. You Completely Install the Redhat Enterprise Linux ES 4 on your System. While start the system, it's giving error to load X window System. How will you fix that problem and make boot successfully run X
Window System.
Answer and Explanation:
Think while Problems occurred on booting System on Runlevel 5 (X Window).
1. /tmp is full or not
2. Quota is already reached
3. Video card or resolution or monitor is misconfigured.
4. xfs service is running or not.
Do These:
1. df -h /tmp /tmp is full remove the unnecessary file
2. quota username if quota is already reached remove unnecessary file from home directory.
3. Boot the System in runlevel 3. you can pass the Kernel Argument from boot loader.
4. Use command: system-config-display It will display a dialog to configure the monitor, Video card, resolution etc.
5. Set the Default Runlevel 5 in /etc/inittab id:5:initdefault:
6. Reboot the System you will get the GUI login Screen.
8. There are two different networks, 192.168.0.0/24 and 192.168.1.0/24. Your System is in 192.168.0.0/24
Network. One RHEL 4 Installed System is going to use as a Router. All required configuration is already done on Linux Server. Where 192.168.0.254 and 192.168.1.254 IP Address are assigned on that Server.
How will make successfully ping to 192.168.1.0/24 Network's Host?
Answer:
1. vi /etc/sysconfig/network
GATEWAY=192.168.0.254
OR
vi /etc/sysconf/network-scripts/ifcfg-eth0
DEVICE=eth0
BOOTPROTO=static
ONBOOT=yes
IPADDR=192.168.0.?
NETMASK=255.255.255.0
GATEWAY=192.168.0.254
2. service network restart
Explanation: Gateway defines the way to exit the packets. According to question System working as a router for two networks have IP Address 192.168.0.254 and 192.168.1.254. To get the hosts on
192.168.1.0/24 should go through 192.168.0.254.
9. Make a swap partition having 100MB. Make Automatically Usable at System Boot Time.
Answer and Explanation:
1. Use fdisk /dev/hda To create new partition.
2. Type n For New partition
3. It will ask for Logical or Primary Partitions. Press l for logical.
4. It will ask for the Starting Cylinder: Use the Default by pressing Enter Key.
5. Type the Size: +100M You can Specify either Last cylinder of Size here.
6. Press P to verify the partitions lists and remember the partitions name.
Default System ID is 83 that means Linux Native.
7. Type t to change the System ID of partition.
8. Type Partition Number
9. Type 82 that means Linux Swap.
10. Press w to write on partitions table.
11. Either Reboot or use partprobe command.
QUESTION NO: 4
free -m Verify Either Swap is enabled or not.
QUESTION NO: 5
vi /etc/fstab
Write:
/dev/hda? /data ext3 defaults 1 2
Amazon SAA-C03-KR - The client only need to spare 1-2 hours to learn our Redhat Certified Technician on Redhat Enterprise Linux 5 (Labs) study question each day or learn them in the weekends. Huawei H19-319_V2.0 - We just want to provide you with the best service. Adobe AD0-E908 - As a matter of fact, we receive thousands of the warm feedbacks to thank us for helping them pass the exam. Omgzlook is famous for our company made these HashiCorp TA-003-P exam questions with accountability. But our IBM C1000-174 study guide will offer you the most professional guidance.
Updated: May 27, 2022