If you choose to buy our RH-202 Mock Test study pdf torrent, it is no need to purchase anything else or attend extra training. We promise you can pass your RH-202 Mock Test actual test at first time with our RedHat free download pdf. RH-202 Mock Test questions and answers are created by our certified senior experts, which can ensure the high quality and high pass rate. You can practice anytime, anywhere, practice repeatedly, practice with others, and even purchase together with othersRH-202 Mock Test learning dumps make every effort to help you save money and effort, so that you can pass the exam with the least cost. The paper materials students buy on the market are often not able to reuse. The latest training materials are tested by IT experts and certified trainers who studied RH-202 Mock Test exam questions for many years.
Red Hat Certification RH-202 The results are accurate.
Moreover if you are not willing to continue our RH-202 - Redhat Certified Technician on Redhat Enterprise Linux 5 (Labs) Mock Test test braindumps service, we would delete all your information instantly without doubt. The price is set reasonably. Up to now, we have successfully issued three packages for you to choose.
With many advantages such as immediate download, simulation before the real exam as well as high degree of privacy, our RH-202 Mock Test actual exam survives all the ordeals throughout its development and remains one of the best choices for those in preparation for RH-202 Mock Test exam. Many people have gained good grades after using our RH-202 Mock Test real dumps, so you will also enjoy the good results. Don’t hesitate any more.
RedHat RH-202 Mock Test - So stop hesitation and buy our study materials.
Preparing for the RH-202 Mock Test real exam is easier if you can select the right test questions and be sure of the answers. The RH-202 Mock Test test answers are tested and approved by our certified experts and you can check the accuracy of our questions from our free demo. Expert for one-year free updating of RH-202 Mock Test dumps pdf, we promise you full refund if you failed exam with our dumps.
So you just need to memorize our correct questions and answers of the RH-202 Mock Test study materials. You absolutely can pass the exam.
RH-202 PDF DEMO:
QUESTION NO: 1
vi /etc/fstab
Write:
/dev/hda? /data ext3 defaults 1 2
QUESTION NO: 2
Use mkfs -t ext3 /dev/hda?
Or
mke2fs -j /dev/hda? To create ext3 filesystem.
QUESTION NO: 3
Verify by mounting on current Sessions also:
mount /dev/hda? /data
5. You are new System Administrator and from now you are going to handle the system and your main task is Network monitoring, Backup and Restore. But you don't know the root password. Change the root password to redhat and login in default Runlevel.
Answer and Explanation:
When you Boot the System, it starts on default Runlevel specified in /etc/inittab: Id:?:initdefault:
When System Successfully boot, it will ask for username and password. But you don't know the root's password. To change the root password you need to boot the system into single user mode. You can pass the kernel arguments from the boot loader.
1. Restart the System.
2. You will get the boot loader GRUB screen.
3. Press a and type 1 or s for single mode ro root=LABEL=/ rhgb queit s
4. System will boot on Single User mode.
5. Use passwd command to change.
6. Press ctrl+d
6. There are more then 400 Computers in your Office. You are appointed as a System Administrator. But you don't have Router. So, you are going to use your One Linux Server as a Router. How will you enable
IP packets forward?
Answer and Explanation:
1. /proc is the virtual filesystem, we use /proc to modify the kernel parameters at running time.
# echo "1" >/proc/sys/net/ipv4/ip_forward
2. /etc/sysctl.conf when System Reboot on next time, /etc/rc.d/rc.sysinit scripts reads the file
/etc/sysctl.conf. To enable the IP forwarding on next reboot also you need to set the parameter. net.ipv4.ip_forward=1
Here 0 means disable, 1 means enable.
7. You Completely Install the Redhat Enterprise Linux ES 4 on your System. While start the system, it's giving error to load X window System. How will you fix that problem and make boot successfully run X
Window System.
Answer and Explanation:
Think while Problems occurred on booting System on Runlevel 5 (X Window).
1. /tmp is full or not
2. Quota is already reached
3. Video card or resolution or monitor is misconfigured.
4. xfs service is running or not.
Do These:
1. df -h /tmp /tmp is full remove the unnecessary file
2. quota username if quota is already reached remove unnecessary file from home directory.
3. Boot the System in runlevel 3. you can pass the Kernel Argument from boot loader.
4. Use command: system-config-display It will display a dialog to configure the monitor, Video card, resolution etc.
5. Set the Default Runlevel 5 in /etc/inittab id:5:initdefault:
6. Reboot the System you will get the GUI login Screen.
8. There are two different networks, 192.168.0.0/24 and 192.168.1.0/24. Your System is in 192.168.0.0/24
Network. One RHEL 4 Installed System is going to use as a Router. All required configuration is already done on Linux Server. Where 192.168.0.254 and 192.168.1.254 IP Address are assigned on that Server.
How will make successfully ping to 192.168.1.0/24 Network's Host?
Answer:
1. vi /etc/sysconfig/network
GATEWAY=192.168.0.254
OR
vi /etc/sysconf/network-scripts/ifcfg-eth0
DEVICE=eth0
BOOTPROTO=static
ONBOOT=yes
IPADDR=192.168.0.?
NETMASK=255.255.255.0
GATEWAY=192.168.0.254
2. service network restart
Explanation: Gateway defines the way to exit the packets. According to question System working as a router for two networks have IP Address 192.168.0.254 and 192.168.1.254. To get the hosts on
192.168.1.0/24 should go through 192.168.0.254.
9. Make a swap partition having 100MB. Make Automatically Usable at System Boot Time.
Answer and Explanation:
1. Use fdisk /dev/hda To create new partition.
2. Type n For New partition
3. It will ask for Logical or Primary Partitions. Press l for logical.
4. It will ask for the Starting Cylinder: Use the Default by pressing Enter Key.
5. Type the Size: +100M You can Specify either Last cylinder of Size here.
6. Press P to verify the partitions lists and remember the partitions name.
Default System ID is 83 that means Linux Native.
7. Type t to change the System ID of partition.
8. Type Partition Number
9. Type 82 that means Linux Swap.
10. Press w to write on partitions table.
11. Either Reboot or use partprobe command.
QUESTION NO: 4
Either Reboot or use partprobe command.
QUESTION NO: 5
Press w to write on partitions table.
Online test engine enjoys great reputation among IT workers because it brings you to the atmosphere of CheckPoint 156-521 real exam and remarks your mistakes. IBM C1000-182 - In today's society, the number of college students has grown rapidly. A little attention to prepare EMC D-XTR-DY-A-24 practice test will improve your skills to clear exam with high passing score. Our Salesforce Salesforce-AI-Associate study materials allow you to improve your competitiveness in a short period of time. Our Cisco 200-301 vce braindumps are the best preparation materials for the certification exam and the guarantee of clearing exam quickly with less effort.
Updated: May 27, 2022