RedHat certification RH-202 Latest Material exam is a examination to test the examinees' IT professional knowledge and experience, which need to master abundant IT knowledge and experience to pass. In order to grasp so much knowledge, generally, it need to spend a lot of time and energy to review many books. Omgzlook is a website which can help you save time and energy to rapidly and efficiently master the RedHat certification RH-202 Latest Material exam related knowledge. Our RH-202 Latest Material study materials are compiled and tested by our expert. RH-202 Latest Material try hard to makes RH-202 Latest Material exam preparation easy with its several quality features. Please select Omgzlook, you will be the next successful IT person.
RedHat RH-202 Latest Material exam is a Technical Specialist exam.
We all well know the status of RedHat certification RH-202 - Redhat Certified Technician on Redhat Enterprise Linux 5 (Labs) Latest Material exams in the IT area is a pivotal position, but the key question is to be able to get RedHat RH-202 - Redhat Certified Technician on Redhat Enterprise Linux 5 (Labs) Latest Material certification is not very simple. Omgzlook's RedHat RH-202 Exam Dumps Collection exam training materials have a part of free questions and answers that provided for you. You can try it later and then decide to take it or leave.
Omgzlook can not only provide all the information related to the RedHat certification RH-202 Latest Material exam for the candidates, but also provide a good learning opportunity for them. Omgzlook be able to help you pass RedHat certification RH-202 Latest Material exam successfully. Having a RedHat RH-202 Latest Material certification can enhance your employment prospects,and then you can have a lot of good jobs.
RedHat RH-202 Latest Material - There are two versions of Omgzlook dumps.
In order to meet the request of current real test, the technology team of research on Omgzlook RedHat RH-202 Latest Material exam materials is always update the questions and answers in time. We always accept feedbacks from users, and take many of the good recommendations, resulting in a perfect Omgzlook RedHat RH-202 Latest Material exam materials. This allows Omgzlook to always have the materials of highest quality.
Once you have checked our demo, you will find the study materials we provide are what you want most. Our target is to reduce your pressure and improve your learning efficiency from preparing for RH-202 Latest Material exam.
RH-202 PDF DEMO:
QUESTION NO: 1
vi /etc/fstab
Write:
/dev/hda? /data ext3 defaults 1 2
QUESTION NO: 2
Verify by mounting on current Sessions also:
mount /dev/hda? /data
5. You are new System Administrator and from now you are going to handle the system and your main task is Network monitoring, Backup and Restore. But you don't know the root password. Change the root password to redhat and login in default Runlevel.
Answer and Explanation:
When you Boot the System, it starts on default Runlevel specified in /etc/inittab: Id:?:initdefault:
When System Successfully boot, it will ask for username and password. But you don't know the root's password. To change the root password you need to boot the system into single user mode. You can pass the kernel arguments from the boot loader.
1. Restart the System.
2. You will get the boot loader GRUB screen.
3. Press a and type 1 or s for single mode ro root=LABEL=/ rhgb queit s
4. System will boot on Single User mode.
5. Use passwd command to change.
6. Press ctrl+d
6. There are more then 400 Computers in your Office. You are appointed as a System Administrator. But you don't have Router. So, you are going to use your One Linux Server as a Router. How will you enable
IP packets forward?
Answer and Explanation:
1. /proc is the virtual filesystem, we use /proc to modify the kernel parameters at running time.
# echo "1" >/proc/sys/net/ipv4/ip_forward
2. /etc/sysctl.conf when System Reboot on next time, /etc/rc.d/rc.sysinit scripts reads the file
/etc/sysctl.conf. To enable the IP forwarding on next reboot also you need to set the parameter. net.ipv4.ip_forward=1
Here 0 means disable, 1 means enable.
7. You Completely Install the Redhat Enterprise Linux ES 4 on your System. While start the system, it's giving error to load X window System. How will you fix that problem and make boot successfully run X
Window System.
Answer and Explanation:
Think while Problems occurred on booting System on Runlevel 5 (X Window).
1. /tmp is full or not
2. Quota is already reached
3. Video card or resolution or monitor is misconfigured.
4. xfs service is running or not.
Do These:
1. df -h /tmp /tmp is full remove the unnecessary file
2. quota username if quota is already reached remove unnecessary file from home directory.
3. Boot the System in runlevel 3. you can pass the Kernel Argument from boot loader.
4. Use command: system-config-display It will display a dialog to configure the monitor, Video card, resolution etc.
5. Set the Default Runlevel 5 in /etc/inittab id:5:initdefault:
6. Reboot the System you will get the GUI login Screen.
8. There are two different networks, 192.168.0.0/24 and 192.168.1.0/24. Your System is in 192.168.0.0/24
Network. One RHEL 4 Installed System is going to use as a Router. All required configuration is already done on Linux Server. Where 192.168.0.254 and 192.168.1.254 IP Address are assigned on that Server.
How will make successfully ping to 192.168.1.0/24 Network's Host?
Answer:
1. vi /etc/sysconfig/network
GATEWAY=192.168.0.254
OR
vi /etc/sysconf/network-scripts/ifcfg-eth0
DEVICE=eth0
BOOTPROTO=static
ONBOOT=yes
IPADDR=192.168.0.?
NETMASK=255.255.255.0
GATEWAY=192.168.0.254
2. service network restart
Explanation: Gateway defines the way to exit the packets. According to question System working as a router for two networks have IP Address 192.168.0.254 and 192.168.1.254. To get the hosts on
192.168.1.0/24 should go through 192.168.0.254.
9. Make a swap partition having 100MB. Make Automatically Usable at System Boot Time.
Answer and Explanation:
1. Use fdisk /dev/hda To create new partition.
2. Type n For New partition
3. It will ask for Logical or Primary Partitions. Press l for logical.
4. It will ask for the Starting Cylinder: Use the Default by pressing Enter Key.
5. Type the Size: +100M You can Specify either Last cylinder of Size here.
6. Press P to verify the partitions lists and remember the partitions name.
Default System ID is 83 that means Linux Native.
7. Type t to change the System ID of partition.
8. Type Partition Number
9. Type 82 that means Linux Swap.
10. Press w to write on partitions table.
11. Either Reboot or use partprobe command.
QUESTION NO: 3
Use mkfs -t ext3 /dev/hda?
Or
mke2fs -j /dev/hda? To create ext3 filesystem.
QUESTION NO: 4
Either Reboot or use partprobe command.
QUESTION NO: 5
mkswap /dev/hda? To create Swap File system on partition.
CompTIA N10-009 - This is really worth the price, the value it creates is far greater than the price. Have you ever tried our IT exam certification software provided by our Omgzlook? If you have, you will use our BCS TTA-19 exam software with no doubt. Microsoft SC-900 - Our strength will make you incredible. Salesforce CRM-Analytics-and-Einstein-Discovery-Consultant - We try our best to ensure 100% pass rate for you. Huawei H14-331_V1.0 - The opportunity always belongs to a person who has the preparation.
Updated: May 27, 2022