As long as you study with our RH-202 Exam Question exam braindumps for 20 to 30 hours that we can claim that you will pass the exam for sure. We really need this efficiency. Perhaps you have doubts about this "shortest time." I believe that after you understand the professional configuration of RH-202 Exam Question training questions, you will agree with what I said. These professional knowledge will become a springboard for your career, help you get the favor of your boss, and make your career reach it is peak. What are you waiting for? Come and take RH-202 Exam Question preparation questions home. But our RH-202 Exam Question exam questions really did.
Red Hat Certification RH-202 Omgzlook will help you achieve your dream.
It is known to us that our RH-202 - Redhat Certified Technician on Redhat Enterprise Linux 5 (Labs) Exam Question study materials have been keeping a high pass rate all the time. Do not spend too much time and money, as long as you have Omgzlook learning materials you will easily pass the exam. In order to help you more Omgzlook the RedHat Latest RH-202 Dumps Questions exam eliminate tension of the candidates on the Internet.
Here are the respective features and detailed disparities of our RH-202 Exam Question practice materials. Pdf version- it is legible to read and remember, and support customers’ printing request, so you can have a print and practice in papers. Software version-It support simulation test system, and times of setup has no restriction.
RedHat RH-202 Exam Question - PDF version is easy for read and print out.
Omgzlook is a reliable site offering the RH-202 Exam Question valid study material supported by 100% pass rate and full money back guarantee. Besides, our RH-202 Exam Question training material is with the high quality and can simulate the actual test environment, which make you feel in the real test situation. You can get the latest information about the RH-202 Exam Question real test, because our Omgzlook will give you one year free update. You can be confident to face any difficulties in the RH-202 Exam Question actual test no matter any changes.
Once you have well prepared with our RH-202 Exam Question dumps collection, you will go through the formal test without any difficulty. To help people pass exam easily, we bring you the latest RH-202 Exam Question exam prep for the actual test which enable you get high passing score easily in test.
RH-202 PDF DEMO:
QUESTION NO: 1
Verify by mounting on current Sessions also:
mount /dev/hda? /data
5. You are new System Administrator and from now you are going to handle the system and your main task is Network monitoring, Backup and Restore. But you don't know the root password. Change the root password to redhat and login in default Runlevel.
Answer and Explanation:
When you Boot the System, it starts on default Runlevel specified in /etc/inittab: Id:?:initdefault:
When System Successfully boot, it will ask for username and password. But you don't know the root's password. To change the root password you need to boot the system into single user mode. You can pass the kernel arguments from the boot loader.
1. Restart the System.
2. You will get the boot loader GRUB screen.
3. Press a and type 1 or s for single mode ro root=LABEL=/ rhgb queit s
4. System will boot on Single User mode.
5. Use passwd command to change.
6. Press ctrl+d
6. There are more then 400 Computers in your Office. You are appointed as a System Administrator. But you don't have Router. So, you are going to use your One Linux Server as a Router. How will you enable
IP packets forward?
Answer and Explanation:
1. /proc is the virtual filesystem, we use /proc to modify the kernel parameters at running time.
# echo "1" >/proc/sys/net/ipv4/ip_forward
2. /etc/sysctl.conf when System Reboot on next time, /etc/rc.d/rc.sysinit scripts reads the file
/etc/sysctl.conf. To enable the IP forwarding on next reboot also you need to set the parameter. net.ipv4.ip_forward=1
Here 0 means disable, 1 means enable.
7. You Completely Install the Redhat Enterprise Linux ES 4 on your System. While start the system, it's giving error to load X window System. How will you fix that problem and make boot successfully run X
Window System.
Answer and Explanation:
Think while Problems occurred on booting System on Runlevel 5 (X Window).
1. /tmp is full or not
2. Quota is already reached
3. Video card or resolution or monitor is misconfigured.
4. xfs service is running or not.
Do These:
1. df -h /tmp /tmp is full remove the unnecessary file
2. quota username if quota is already reached remove unnecessary file from home directory.
3. Boot the System in runlevel 3. you can pass the Kernel Argument from boot loader.
4. Use command: system-config-display It will display a dialog to configure the monitor, Video card, resolution etc.
5. Set the Default Runlevel 5 in /etc/inittab id:5:initdefault:
6. Reboot the System you will get the GUI login Screen.
8. There are two different networks, 192.168.0.0/24 and 192.168.1.0/24. Your System is in 192.168.0.0/24
Network. One RHEL 4 Installed System is going to use as a Router. All required configuration is already done on Linux Server. Where 192.168.0.254 and 192.168.1.254 IP Address are assigned on that Server.
How will make successfully ping to 192.168.1.0/24 Network's Host?
Answer:
1. vi /etc/sysconfig/network
GATEWAY=192.168.0.254
OR
vi /etc/sysconf/network-scripts/ifcfg-eth0
DEVICE=eth0
BOOTPROTO=static
ONBOOT=yes
IPADDR=192.168.0.?
NETMASK=255.255.255.0
GATEWAY=192.168.0.254
2. service network restart
Explanation: Gateway defines the way to exit the packets. According to question System working as a router for two networks have IP Address 192.168.0.254 and 192.168.1.254. To get the hosts on
192.168.1.0/24 should go through 192.168.0.254.
9. Make a swap partition having 100MB. Make Automatically Usable at System Boot Time.
Answer and Explanation:
1. Use fdisk /dev/hda To create new partition.
2. Type n For New partition
3. It will ask for Logical or Primary Partitions. Press l for logical.
4. It will ask for the Starting Cylinder: Use the Default by pressing Enter Key.
5. Type the Size: +100M You can Specify either Last cylinder of Size here.
6. Press P to verify the partitions lists and remember the partitions name.
Default System ID is 83 that means Linux Native.
7. Type t to change the System ID of partition.
8. Type Partition Number
9. Type 82 that means Linux Swap.
10. Press w to write on partitions table.
11. Either Reboot or use partprobe command.
QUESTION NO: 2
mkswap /dev/hda? To create Swap File system on partition.
QUESTION NO: 3
vi /etc/fstab
Write:
/dev/hda? /data ext3 defaults 1 2
QUESTION NO: 4
Use mkfs -t ext3 /dev/hda?
Or
mke2fs -j /dev/hda? To create ext3 filesystem.
QUESTION NO: 5
swapon /dev/hda? To enable the Swap space from partition.
Our website aimed to help you to get through your certification test easier with the help of our valid ServiceNow CIS-SP vce braindumps. So the ServiceNow CAD questions & answers are valid and reliable to use. But PayPal can guarantee sellers and buyers' account safe while paying for IBM S2000-024 latest exam braindumps with extra tax. You can get prepared with our ISC SSCP exam materials only for 20 to 30 hours before you go to attend your exam. You can enjoy 365 days free update after purchase of our Juniper JN0-664 exam torrent.
Updated: May 27, 2022