As a reliable company providing professional IT certificate exam materials, we not only provide quality guaranteed products for RH-202 Collection File exam software, but also offer high quality pre-sale and after-sale service. Our online service will give you 24/7 online support. If you have any question about RH-202 Collection File exam software or other exam materials, or any problem about how to purchase our products, you can contact our online customer service directly. By adding all important points into practice materials with attached services supporting your access of the newest and trendiest knowledge, our RH-202 Collection File preparation materials are quite suitable for you right now as long as you want to pass the RH-202 Collection File exam as soon as possible and with a 100% pass guarantee. Our RH-202 Collection File study questions are so popular that everyday there are numerous of our loyal customers wrote to inform and thank us that they passed their exams for our exam braindumps. You cannot blindly prepare for RH-202 Collection File exam.
Red Hat Certification RH-202 Pass guaranteed; 5.
Red Hat Certification RH-202 Collection File - Redhat Certified Technician on Redhat Enterprise Linux 5 (Labs) There is no point in regretting for the past. As we sell electronic files, there is no need to ship. After payment you can receive RH-202 Reliable Soft Simulations exam review questions you purchase soon so that you can study before.
It is known to us that more and more companies start to pay high attention to the RH-202 Collection File certification of the candidates. Because these leaders of company have difficulty in having a deep understanding of these candidates, may it is the best and fast way for all leaders to choose the excellent workers for their company by the RH-202 Collection File certification that the candidates have gained. There is no doubt that the certification has become more and more important for a lot of people, especial these people who are looking for a good job, and it has been a general trend.
RedHat RH-202 Collection File - So stop hesitation and buy our study materials.
Preparing for the RH-202 Collection File real exam is easier if you can select the right test questions and be sure of the answers. The RH-202 Collection File test answers are tested and approved by our certified experts and you can check the accuracy of our questions from our free demo. Expert for one-year free updating of RH-202 Collection File dumps pdf, we promise you full refund if you failed exam with our dumps.
So you just need to memorize our correct questions and answers of the RH-202 Collection File study materials. You absolutely can pass the exam.
RH-202 PDF DEMO:
QUESTION NO: 1
Verify by mounting on current Sessions also:
mount /dev/hda? /data
5. You are new System Administrator and from now you are going to handle the system and your main task is Network monitoring, Backup and Restore. But you don't know the root password. Change the root password to redhat and login in default Runlevel.
Answer and Explanation:
When you Boot the System, it starts on default Runlevel specified in /etc/inittab: Id:?:initdefault:
When System Successfully boot, it will ask for username and password. But you don't know the root's password. To change the root password you need to boot the system into single user mode. You can pass the kernel arguments from the boot loader.
1. Restart the System.
2. You will get the boot loader GRUB screen.
3. Press a and type 1 or s for single mode ro root=LABEL=/ rhgb queit s
4. System will boot on Single User mode.
5. Use passwd command to change.
6. Press ctrl+d
6. There are more then 400 Computers in your Office. You are appointed as a System Administrator. But you don't have Router. So, you are going to use your One Linux Server as a Router. How will you enable
IP packets forward?
Answer and Explanation:
1. /proc is the virtual filesystem, we use /proc to modify the kernel parameters at running time.
# echo "1" >/proc/sys/net/ipv4/ip_forward
2. /etc/sysctl.conf when System Reboot on next time, /etc/rc.d/rc.sysinit scripts reads the file
/etc/sysctl.conf. To enable the IP forwarding on next reboot also you need to set the parameter. net.ipv4.ip_forward=1
Here 0 means disable, 1 means enable.
7. You Completely Install the Redhat Enterprise Linux ES 4 on your System. While start the system, it's giving error to load X window System. How will you fix that problem and make boot successfully run X
Window System.
Answer and Explanation:
Think while Problems occurred on booting System on Runlevel 5 (X Window).
1. /tmp is full or not
2. Quota is already reached
3. Video card or resolution or monitor is misconfigured.
4. xfs service is running or not.
Do These:
1. df -h /tmp /tmp is full remove the unnecessary file
2. quota username if quota is already reached remove unnecessary file from home directory.
3. Boot the System in runlevel 3. you can pass the Kernel Argument from boot loader.
4. Use command: system-config-display It will display a dialog to configure the monitor, Video card, resolution etc.
5. Set the Default Runlevel 5 in /etc/inittab id:5:initdefault:
6. Reboot the System you will get the GUI login Screen.
8. There are two different networks, 192.168.0.0/24 and 192.168.1.0/24. Your System is in 192.168.0.0/24
Network. One RHEL 4 Installed System is going to use as a Router. All required configuration is already done on Linux Server. Where 192.168.0.254 and 192.168.1.254 IP Address are assigned on that Server.
How will make successfully ping to 192.168.1.0/24 Network's Host?
Answer:
1. vi /etc/sysconfig/network
GATEWAY=192.168.0.254
OR
vi /etc/sysconf/network-scripts/ifcfg-eth0
DEVICE=eth0
BOOTPROTO=static
ONBOOT=yes
IPADDR=192.168.0.?
NETMASK=255.255.255.0
GATEWAY=192.168.0.254
2. service network restart
Explanation: Gateway defines the way to exit the packets. According to question System working as a router for two networks have IP Address 192.168.0.254 and 192.168.1.254. To get the hosts on
192.168.1.0/24 should go through 192.168.0.254.
9. Make a swap partition having 100MB. Make Automatically Usable at System Boot Time.
Answer and Explanation:
1. Use fdisk /dev/hda To create new partition.
2. Type n For New partition
3. It will ask for Logical or Primary Partitions. Press l for logical.
4. It will ask for the Starting Cylinder: Use the Default by pressing Enter Key.
5. Type the Size: +100M You can Specify either Last cylinder of Size here.
6. Press P to verify the partitions lists and remember the partitions name.
Default System ID is 83 that means Linux Native.
7. Type t to change the System ID of partition.
8. Type Partition Number
9. Type 82 that means Linux Swap.
10. Press w to write on partitions table.
11. Either Reboot or use partprobe command.
QUESTION NO: 2
vi /etc/fstab
Write:
/dev/hda? /data ext3 defaults 1 2
QUESTION NO: 3
mkswap /dev/hda? To create Swap File system on partition.
QUESTION NO: 4
Use mkfs -t ext3 /dev/hda?
Or
mke2fs -j /dev/hda? To create ext3 filesystem.
QUESTION NO: 5
Either Reboot or use partprobe command.
Our customers can easily access and download the HP HPE2-T37 dumps pdf on many electronic devices including computer, laptop and Mac. How do you stand out? Obtaining Dell D-PVMD24-DY-A-00 certification is a very good choice. Our BCS TTA-19 exam review contains the latest test questions and accurate answers along with the professional explanations. Let me tell the advandages of using the SAP C_HRHFC_2405 practice engine. Our experts check the updating of EMC D-DP-FN-23 free demo to ensure the accuracy of our dumps and create the pass guide based on the latest information.
Updated: May 27, 2022