You can send us an email to ask questions at anytime, anywhere. For any questions you may have during the use of RH-202 Braindumps Book exam questions, our customer service staff will be patient to help you to solve them. At the same time, if you have problems with downloading and installing, Redhat Certified Technician on Redhat Enterprise Linux 5 (Labs) torrent prep also has dedicated staff that can provide you with remote online guidance. It all starts from our RH-202 Braindumps Book learning questions. Come and buy our RH-202 Braindumps Book practice engine, you will be confident and satisfied with it and have a brighter future. Only 20-30 hours on our RH-202 Braindumps Book learning guide are needed for the client to prepare for the test and it saves our client’s time and energy.
Red Hat Certification RH-202 They are quite convenient.
Red Hat Certification RH-202 Braindumps Book - Redhat Certified Technician on Redhat Enterprise Linux 5 (Labs) With the rapid development of the world economy, it has been universally accepted that a growing number of people have longed to become the social elite. Do you want to find a job that really fulfills your ambitions? That's because you haven't found an opportunity to improve your ability to lay a solid foundation for a good career. Our RH-202 Top Exam Dumps quiz torrent can help you get out of trouble regain confidence and embrace a better life.
So a lot of people long to know the RH-202 Braindumps Book study questions in detail. In order to meet the demands of all people, our company has designed the trail version for all customers. We can promise that our company will provide the demo of the RH-202 Braindumps Book learn prep for all people to help them make the better choice.
RedHat RH-202 Braindumps Book - As we all know, time and tide waits for no man.
Time and tide wait for no man, if you want to save time, please try to use our RH-202 Braindumps Book preparation exam, it will cherish every minute of you and it will help you to create your life value. With the high pass rate of our RH-202 Braindumps Book exam questions as 98% to 100% which is unbeatable in the market, we are proud to say that we have helped tens of thousands of our customers achieve their dreams and got their RH-202 Braindumps Book certifications. Join us and you will be one of them.
You also can refer to other candidates’ review guidance, which might give you some help. Then we can offer you a variety of learning styles.
RH-202 PDF DEMO:
QUESTION NO: 1
vi /etc/fstab
Write:
/dev/hda? /data ext3 defaults 1 2
QUESTION NO: 2
Use mkfs -t ext3 /dev/hda?
Or
mke2fs -j /dev/hda? To create ext3 filesystem.
QUESTION NO: 3
Verify by mounting on current Sessions also:
mount /dev/hda? /data
5. You are new System Administrator and from now you are going to handle the system and your main task is Network monitoring, Backup and Restore. But you don't know the root password. Change the root password to redhat and login in default Runlevel.
Answer and Explanation:
When you Boot the System, it starts on default Runlevel specified in /etc/inittab: Id:?:initdefault:
When System Successfully boot, it will ask for username and password. But you don't know the root's password. To change the root password you need to boot the system into single user mode. You can pass the kernel arguments from the boot loader.
1. Restart the System.
2. You will get the boot loader GRUB screen.
3. Press a and type 1 or s for single mode ro root=LABEL=/ rhgb queit s
4. System will boot on Single User mode.
5. Use passwd command to change.
6. Press ctrl+d
6. There are more then 400 Computers in your Office. You are appointed as a System Administrator. But you don't have Router. So, you are going to use your One Linux Server as a Router. How will you enable
IP packets forward?
Answer and Explanation:
1. /proc is the virtual filesystem, we use /proc to modify the kernel parameters at running time.
# echo "1" >/proc/sys/net/ipv4/ip_forward
2. /etc/sysctl.conf when System Reboot on next time, /etc/rc.d/rc.sysinit scripts reads the file
/etc/sysctl.conf. To enable the IP forwarding on next reboot also you need to set the parameter. net.ipv4.ip_forward=1
Here 0 means disable, 1 means enable.
7. You Completely Install the Redhat Enterprise Linux ES 4 on your System. While start the system, it's giving error to load X window System. How will you fix that problem and make boot successfully run X
Window System.
Answer and Explanation:
Think while Problems occurred on booting System on Runlevel 5 (X Window).
1. /tmp is full or not
2. Quota is already reached
3. Video card or resolution or monitor is misconfigured.
4. xfs service is running or not.
Do These:
1. df -h /tmp /tmp is full remove the unnecessary file
2. quota username if quota is already reached remove unnecessary file from home directory.
3. Boot the System in runlevel 3. you can pass the Kernel Argument from boot loader.
4. Use command: system-config-display It will display a dialog to configure the monitor, Video card, resolution etc.
5. Set the Default Runlevel 5 in /etc/inittab id:5:initdefault:
6. Reboot the System you will get the GUI login Screen.
8. There are two different networks, 192.168.0.0/24 and 192.168.1.0/24. Your System is in 192.168.0.0/24
Network. One RHEL 4 Installed System is going to use as a Router. All required configuration is already done on Linux Server. Where 192.168.0.254 and 192.168.1.254 IP Address are assigned on that Server.
How will make successfully ping to 192.168.1.0/24 Network's Host?
Answer:
1. vi /etc/sysconfig/network
GATEWAY=192.168.0.254
OR
vi /etc/sysconf/network-scripts/ifcfg-eth0
DEVICE=eth0
BOOTPROTO=static
ONBOOT=yes
IPADDR=192.168.0.?
NETMASK=255.255.255.0
GATEWAY=192.168.0.254
2. service network restart
Explanation: Gateway defines the way to exit the packets. According to question System working as a router for two networks have IP Address 192.168.0.254 and 192.168.1.254. To get the hosts on
192.168.1.0/24 should go through 192.168.0.254.
9. Make a swap partition having 100MB. Make Automatically Usable at System Boot Time.
Answer and Explanation:
1. Use fdisk /dev/hda To create new partition.
2. Type n For New partition
3. It will ask for Logical or Primary Partitions. Press l for logical.
4. It will ask for the Starting Cylinder: Use the Default by pressing Enter Key.
5. Type the Size: +100M You can Specify either Last cylinder of Size here.
6. Press P to verify the partitions lists and remember the partitions name.
Default System ID is 83 that means Linux Native.
7. Type t to change the System ID of partition.
8. Type Partition Number
9. Type 82 that means Linux Swap.
10. Press w to write on partitions table.
11. Either Reboot or use partprobe command.
QUESTION NO: 4
Either Reboot or use partprobe command.
QUESTION NO: 5
mkswap /dev/hda? To create Swap File system on partition.
Our Microsoft PL-500 certification questions are close to the real exam and the questions and answers of the test bank cover the entire syllabus of the real exam and all the important information about the exam. The high passing rate of ISC SSCP exam training also requires your efforts. Because the SAP C_THR89_2405 cram simulator from our company are very useful for you to pass the exam and get the certification. Juniper JN0-664 - As a thriving multinational company, we are always committed to solving the problem that our customers may have. In the future, our ISC SSCP study materials will become the top selling products.
Updated: May 27, 2022