Omgzlook follows the career ethic of providing the first-class RH-202 Boot Camp practice questions for you. Because we endorse customers’ opinions and drive of passing the RH-202 Boot Camp certificate, so we are willing to offer help with full-strength. With years of experience dealing with RH-202 Boot Camp learning engine, we have thorough grasp of knowledge which appears clearly in our RH-202 Boot Camp study quiz with all the keypoints and the latest questions and answers. Now IT industry is more and more competitive. Passing RedHat RH-202 Boot Camp exam certification can effectively help you entrench yourself and enhance your status in this competitive IT area. The finicky points can be solved effectively by using our RH-202 Boot Camp exam questions.
Come and buy our RH-202 Boot Camp exam guide!
We provide one year studying assist service and one year free updates downloading of RedHat RH-202 - Redhat Certified Technician on Redhat Enterprise Linux 5 (Labs) Boot Camp exam questions. Up to now, many people have successfully passed the Valid RH-202 Exam Objectives exam with our assistance. So you need to be brave enough to have a try.
Most IT workers prefer to choose our online test engine for their RH-202 Boot Camp exam prep because online version is more flexible and convenient. With the help of our online version, you can not only practice our RH-202 Boot Camp exam pdf in any electronic equipment, but also make you feel the atmosphere of RH-202 Boot Camp actual test. The exam simulation will mark your mistakes and help you play well in RH-202 Boot Camp practice test.
RedHat RH-202 Boot Camp - At last, you will not regret your choice.
we can give you 100% pass rate guarantee. RH-202 Boot Camp practice quiz is equipped with a simulated examination system with timing function, allowing you to examine your RH-202 Boot Camp learning results at any time, keep checking for defects, and improve your strength. Besides, during the period of using RH-202 Boot Camp learning guide, we also provide you with 24 hours of free online services, which help to solve any problem for you at any time and sometimes mean a lot to our customers.
Through our short-term special training You can quickly grasp IT professional knowledge, and then have a good preparation for your exam. We promise that we will do our best to help you pass the RedHat certification RH-202 Boot Camp exam.
RH-202 PDF DEMO:
QUESTION NO: 1
free -m Verify Either Swap is enabled or not.
QUESTION NO: 2
swapon /dev/hda? To enable the Swap space from partition.
QUESTION NO: 3
mkswap /dev/hda? To create Swap File system on partition.
QUESTION NO: 4
Verify by mounting on current Sessions also:
mount /dev/hda? /data
5. You are new System Administrator and from now you are going to handle the system and your main task is Network monitoring, Backup and Restore. But you don't know the root password. Change the root password to redhat and login in default Runlevel.
Answer and Explanation:
When you Boot the System, it starts on default Runlevel specified in /etc/inittab: Id:?:initdefault:
When System Successfully boot, it will ask for username and password. But you don't know the root's password. To change the root password you need to boot the system into single user mode. You can pass the kernel arguments from the boot loader.
1. Restart the System.
2. You will get the boot loader GRUB screen.
3. Press a and type 1 or s for single mode ro root=LABEL=/ rhgb queit s
4. System will boot on Single User mode.
5. Use passwd command to change.
6. Press ctrl+d
6. There are more then 400 Computers in your Office. You are appointed as a System Administrator. But you don't have Router. So, you are going to use your One Linux Server as a Router. How will you enable
IP packets forward?
Answer and Explanation:
1. /proc is the virtual filesystem, we use /proc to modify the kernel parameters at running time.
# echo "1" >/proc/sys/net/ipv4/ip_forward
2. /etc/sysctl.conf when System Reboot on next time, /etc/rc.d/rc.sysinit scripts reads the file
/etc/sysctl.conf. To enable the IP forwarding on next reboot also you need to set the parameter. net.ipv4.ip_forward=1
Here 0 means disable, 1 means enable.
7. You Completely Install the Redhat Enterprise Linux ES 4 on your System. While start the system, it's giving error to load X window System. How will you fix that problem and make boot successfully run X
Window System.
Answer and Explanation:
Think while Problems occurred on booting System on Runlevel 5 (X Window).
1. /tmp is full or not
2. Quota is already reached
3. Video card or resolution or monitor is misconfigured.
4. xfs service is running or not.
Do These:
1. df -h /tmp /tmp is full remove the unnecessary file
2. quota username if quota is already reached remove unnecessary file from home directory.
3. Boot the System in runlevel 3. you can pass the Kernel Argument from boot loader.
4. Use command: system-config-display It will display a dialog to configure the monitor, Video card, resolution etc.
5. Set the Default Runlevel 5 in /etc/inittab id:5:initdefault:
6. Reboot the System you will get the GUI login Screen.
8. There are two different networks, 192.168.0.0/24 and 192.168.1.0/24. Your System is in 192.168.0.0/24
Network. One RHEL 4 Installed System is going to use as a Router. All required configuration is already done on Linux Server. Where 192.168.0.254 and 192.168.1.254 IP Address are assigned on that Server.
How will make successfully ping to 192.168.1.0/24 Network's Host?
Answer:
1. vi /etc/sysconfig/network
GATEWAY=192.168.0.254
OR
vi /etc/sysconf/network-scripts/ifcfg-eth0
DEVICE=eth0
BOOTPROTO=static
ONBOOT=yes
IPADDR=192.168.0.?
NETMASK=255.255.255.0
GATEWAY=192.168.0.254
2. service network restart
Explanation: Gateway defines the way to exit the packets. According to question System working as a router for two networks have IP Address 192.168.0.254 and 192.168.1.254. To get the hosts on
192.168.1.0/24 should go through 192.168.0.254.
9. Make a swap partition having 100MB. Make Automatically Usable at System Boot Time.
Answer and Explanation:
1. Use fdisk /dev/hda To create new partition.
2. Type n For New partition
3. It will ask for Logical or Primary Partitions. Press l for logical.
4. It will ask for the Starting Cylinder: Use the Default by pressing Enter Key.
5. Type the Size: +100M You can Specify either Last cylinder of Size here.
6. Press P to verify the partitions lists and remember the partitions name.
Default System ID is 83 that means Linux Native.
7. Type t to change the System ID of partition.
8. Type Partition Number
9. Type 82 that means Linux Swap.
10. Press w to write on partitions table.
11. Either Reboot or use partprobe command.
QUESTION NO: 5
vi /etc/fstab /dev/hda? swap swap defaults 0 0
CompTIA FC0-U61 - By clearing different RedHat exams, you can easily land your dream job. Google Professional-Cloud-Network-Engineer - We will provide one year free update service for those customers who choose Omgzlook's products. The CompTIA CS0-003 sample questions include all the files you need to prepare for the RedHat CompTIA CS0-003 exam. CWNP CWAP-404 - As most of our exam questions are updated monthly, you will get the best resources with market-fresh quality and reliability assurance. Furthermore, it is our set of CompTIA CS0-003 brain dumps that stamp your success with a marvelous score.
Updated: May 27, 2022