AZ-220 Questions Pdf guide torrent has a first-rate team of experts, advanced learning concepts and a complete learning model. You give us a trust and we reward you for a better future. With AZ-220 Questions Pdf guide torrent, you may only need to spend half of your time that you will need if you didn’t use our products successfully passing a professional qualification exam. If you are always complaining that you are too spread, are overwhelmed with the job at hand, and struggle to figure out how to prioritize your efforts, these would be the basic problem of low efficiency and production. You will never doubt anymore with our AZ-220 Questions Pdf test prep. Although we cannot contact with each other face to face, but there are no disparate treatments and we treat every customer with consideration like we are around you at every stage during your review process on our AZ-220 Questions Pdf exam questions.
Microsoft Certified: Azure IoT Developer Specialty AZ-220 And you will have the demos to check them out.
Microsoft Certified: Azure IoT Developer Specialty AZ-220 Questions Pdf - Microsoft Azure IoT Developer As the talent team grows, every fighter must own an extra technical skill to stand out from the crowd. And we will try our best to satisfy our customers with better quatily and services. Our loyal customers give our AZ-220 Guaranteed Success exam materials strong support.
How to get the test AZ-220 Questions Pdf certification in a short time, which determines enough qualification certificates to test our learning ability and application level. This may be a contradiction of the problem, we hope to be able to spend less time and energy to take into account the test AZ-220 Questions Pdf certification, but the qualification examination of the learning process is very wasted energy, so how to achieve the balance? Our AZ-220 Questions Pdf exam prep can be done with its high-efficient merit. Try it now!
Microsoft AZ-220 Questions Pdf - Trust us and give yourself a chance to success!
Our AZ-220 Questions Pdf training materials are regarded as the most excellent practice materials by authority. Our company is dedicated to researching, manufacturing, selling and service of the AZ-220 Questions Pdf study guide. Also, we have our own research center and experts team. So our products can quickly meet the new demands of customers. That is why our AZ-220 Questions Pdf exam questions are popular among candidates. we have strong strenght to support our AZ-220 Questions Pdf practice engine.
There are so many advantages of our AZ-220 Questions Pdf actual exam, and you are welcome to have a try! We have put substantial amount of money and effort into upgrading the quality of our AZ-220 Questions Pdf preparation materials, into our own AZ-220 Questions Pdf sales force and into our after sale services.
AZ-220 PDF DEMO:
QUESTION NO: 1
Your company is creating a new camera security system that will use Azure IoT Hub.
You plan to use an Azure IoT Edge device that will run Ubuntu Server 18.04.
You need to configure the IoT Edge device.
Which three actions should you perform in sequence? To answer, move the appropriate actions from the list of actions to the answer area and arrange them in the correct order.
Answer:
Explanation:
Step 1: Run the following commands
Install the container runtime.
Azure IoT Edge relies on an OCI-compatible container runtime. For production scenarios, we recommended that you use the Moby-based engine provided below. The Moby engine is the only container engine officially supported with Azure IoT Edge. Docker CE/EE container images are compatible with the Moby runtime.
Install the Moby engine.
sudo apt-get install moby-engine
Install the Moby command-line interface (CLI). The CLI is useful for development but optional for production deployments.
sudo apt-get install moby-cli
Install the security daemon. The package is installed at /etc/iotedge/.
sudo apt-get install iotedge
Step 2: From IotHub,create an IoT Edge device registry entry.
Note: In your IoT Hub in the Azure portal, IoT Edge devices are created and managed separately from
IOT devices that are not edge enabled.
Sign in to the Azure portal and navigate to your IoT hub.
In the left pane, select IoT Edge from the menu.
Select Add an IoT Edge device.
Provide a descriptive device ID. Use the default settings to auto-generate authentication keys and connect the new device to your hub.
Select Save.
Retrieve the connection string in the Azure portal
1. When you're ready to set up your device, you need the connection string that links your physical device with its identity in the IoT hub.
2. From the IoT Edge page in the portal, click on the device ID from the list of IoT Edge devices.
3. Copy the value of either Primary Connection String or Secondary Connection String.
Step 3: Add the connection string to..
To manually provision a device, you need to provide it with a device connection string that you can create by registering a new device in your IoT hub.
Open the configuration file.
sudo nano /etc/iotedge/config.yaml
Find the provisioning configurations of the file and uncomment the Manual provisioning configuration section. Update the value of device_connection_string with the connection string from your IoT Edge device.
Save and close the file.
After entering the provisioning information in the configuration file, restart the daemon:
sudosystemctl restart iotedge
Reference:
https://docs.microsoft.com/en-us/azure/iot-edge/how-to-install-iot-edge-linux
QUESTION NO: 2
You have an Azure IoT hub that is being taken from prototype to production.
You plan to connect IoT devices to the IoT hub. The devices have hardware security modules (HSMs).
You need to use the most secure authentication method between the devices and the IoT hub.
Company policy prohibits the use of internally generated certificates.
Which authentication method should you use?
A. a symmetric key
B. An X.509 certificate signed by a root certification authority (CA).
C. an X.509 self-signed certificate
D. a certificate thumbprint
Answer: B
Explanation:
Purchase X.509 certificates from a root certificate authority (CA). This method is recommended for production environments.
The hardware security module, or HSM, is used for secure, hardware-based storage of device secrets, and is the most secure form of secret storage. Both X.509 certificates and SAS tokens can be stored in the HSM Reference:
https://docs.microsoft.com/en-us/azure/iot-dps/concepts-security
QUESTION NO: 3
You have an Azure IoT solution that includes an Azure IoT hub.
You receive a root certification authority (CA) certificate from the security department at your company.
You need to configure the IoT hub to use the root CA certificate.
Which four actions should you perform in sequence? To answer, move the appropriate actions from the list of actions to the answer area and arrange them in the correct order.
Answer:
Reference:
https://docs.microsoft.com/bs-latn-ba/azure/iot-hub/iot-hub-security-x509-get-started
QUESTION NO: 4
You have an instance of Azure Time Series Insights and an Azure IoT hub that receives streaming telemetry from IoT devices.
You need to configure Time Series Insights to receive telemetry from the devices.
Which three actions should you perform in sequence? To answer, move the appropriate actions from the list of actions to the answer area and arrange them in the correct order.
Answer:
Explanation:
Step 1: Create a dedicated consumer group..
Add a consumer group to your IoT hub.
Applications use consumer groups to pull data from Azure IoT Hub. To reliably read data from your
IoT hub, provide a dedicated consumer group that's used only by this Time Series Insights environment.
Step 2: Add a new Time Series Insights event source.
Add a new event source
Sign in to the Azure portal.
In the left menu, select All resources. Select your Time Series Insights environment.
Under Settings, select Event Sources, and then select Add.
In the New event source pane, for Event source name, enter a name that's unique to this Time Series
Insights environment. For example, enter event-stream.
Step 3: Configure the Time Series event source to connect to an existing IOT hub Step 4: For Source, select IoT Hub.
Step 5: Select a value for Import option:
If you already have an IoT hub in one of your subscriptions, select Use IoT Hub from available subscriptions. This option is the easiest approach.
Reference:
https://docs.microsoft.com/en-us/azure/time-series-insights/time-series-insights-how-to-add-an- event-source-iothub
QUESTION NO: 5
You need to configure Stream Analytics to meet the POV requirements.
What are two ways to achieve the goal? Each Answer presents a complete solution.
NOTE: Each correct selection is worth one point.
A. Route telemetry to an Azure Blob storage custom endpoint, and then configure the Blob storage as a reference input for Stream Analytics.
B. Create an input in Stream Analytics that uses the built-in events endpoint of IoT Hub as the source.
C. From IoT Hub, create a custom event hub endpoint, and then configure the endpoint as an input to Stream Analytics.
D. Create a Stream Analytics module, and then deploy the module to all IoT Edge devices in the fleet.
Answer: B,C
Explanation:
Salesforce Marketing-Cloud-Developer - Time is flying and the exam date is coming along, which is sort of intimidating considering your status of review process. No other SAP C-S4EWM-2023 study materials or study dumps can bring you the knowledge and preparation that you will get from the SAP C-S4EWM-2023 study materials available only from Omgzlook. WGU Scripting-and-Programming-Foundations - It will add more colors to your life. Our experts have great familiarity with Salesforce Salesforce-Hyperautomation-Specialist real exam in this area. Omgzlook will provide all the latest and accurate exam practice questions and answers for the staff to participate in VMware 2V0-32.24 certification exam.
Updated: May 28, 2022