Our IT elite finally designs the best 70-410 Test Vce exam study materials by collecting the complex questions and analyzing the focal points of the exam over years. Even so, our team still insist to be updated ceaselessly, and during one year after you purchased 70-410 Test Vce exam software, we will immediately inform you once the 70-410 Test Vce exam software has any update. Actually, 70-410 Test Vce exam really make you anxious. In such a way, you will get a leisure study experience as well as a doomed success on your coming 70-410 Test Vce exam. After our unremitting efforts, 70-410 Test Vce learning guide comes in everybody's expectation. Every version of 70-410 Test Vce study materials that we provide to you has its own advantage: the PDF version has no equipment limited, which can be read anywhere; the online version can use on any electronic equipment there is network available; the software version can simulate the real 70-410 Test Vce exam environment to let you have more real feeling to 70-410 Test Vce real exam, besides the software version can be available installed on unlimited number devices.
Windows Server 2012 70-410 You will surely benefit from your correct choice.
If you do not have extraordinary wisdom, do not want to spend too much time on learning, but want to reach the pinnacle of life through 70-410 - Installing and Configuring Windows Server 2012 Test Vce exam, then you must have 70-410 - Installing and Configuring Windows Server 2012 Test Vce question torrent. When you are eager to pass the 70-410 Valid Test Camp Questions real exam and need the most professional and high quality practice material, we are willing to offer help. Our 70-410 Valid Test Camp Questions training prep has been on the top of the industry over 10 years with passing rate up to 98 to 100 percent.
Our 70-410 Test Vce study materials are easy to be mastered and boost varied functions. We compile Our 70-410 Test Vce preparation questions elaborately and provide the wonderful service to you thus you can get a good learning and preparation for the 70-410 Test Vce exam. After you know the characteristics and functions of our 70-410 Test Vce training materials in detail, you will definitely love our exam dumps and enjoy the wonderful study experience.
Microsoft 70-410 Test Vce - Action always speaks louder than words.
If you buy the Software or the APP online version of our 70-410 Test Vce study materials, you will find that the timer can aid you control the time. Once it is time to submit your exercises, the system of the 70-410 Test Vce preparation exam will automatically finish your operation. After a several time, you will get used to finish your test on time. If you are satisfied with our 70-410 Test Vce training guide, come to choose and purchase.
As you know, it is troublesome to get the 70-410 Test Vcecertificate. Now, you are fortunate enough to come across our 70-410 Test Vce exam guide.
70-410 PDF DEMO:
QUESTION NO: 1
You have a server named Server1 that runs Windows Server 2012 R2. Server1 has the Hyper-V server role installed. Server1 has 8 GB of RAM.
Server1 hosts five virtual machines that run Windows Server 2012 R2.
The settings of a virtual machine named Server3 are configured as shown in the exhibit. (Click the
Exhibit button.)
You need to ensure that when Server1 restarts, Server3 automatically resumes without intervention.
The solution must prevent data loss.
Which settings should you modify?
A. BIOS
B. Automatic Start Action
C. Automatic Stop Action
D. Integration Services
Answer: C
Explanation
The Automatic Stop Action setting should be modified because it will allow you to configure:
"Save the virtual machine state" option instructs Hyper-V Virtual Machine Management Service to save the virtual machine state on the local disk when the Hyper-V Server shuts down.
OR "Turn Off the virtual machine" is used by the Hyper-V Management Service (VMMS.exe) to gracefully turn off the virtual machine.
OR "Shut down the guest operating system" is successful only if the "Hyper-V Shutdown" guest service is running in the virtual machine. The guest service is required to be running in the virtual machine as the Hyper-V VMMS.EXE process will trigger Windows Exit message which is received by the service. Once the message is received by the guest service, it takes the necessary actions to shut down the virtual machine.
Reference: http://www.altaro.com/hyper-v/hyper-v-automatic-start-and-stop-action/
QUESTION NO: 2
Your network contains a server named Server1 that runs Windows Server 2012 R2. Server1 has the Hyper-V server role installed.
Server1 hosts four virtual machines named VM1, VM2, VM3, and VM4.
Server1 is configured as shown in the following table.
VM2 sends and receives large amounts of data over the network.
You need to ensure that the network traffic of VM2 bypasses the virtual switches of the parent partition.
What should you configure?
A. NUMA topology
B. Resource control
C. resource metering
D. virtual Machine Chimney
E. The VLAN ID
F. Processor Compatibility
G. The startup order
H. Automatic Start Action
I. Integration Services
J. Port mirroring
K. Single-root I/O virtualization
Answer: K
Explanation
Single-root I/O virtualization -capable network adapters can be assigned directly to a virtual machine to maximize network throughput while minimizing network latency and the CPU overhead required for processing network traffic.
References: http://technet.microsoft.com/en-us/library/cc766320(v=ws.10).aspx
http://technet.microsoft.com/en-us/library/hh831410.aspx
Exam Ref 70-410, Installing and Configuring Windows Server 2012 R2, Chapter 3: Configure Hyper-V,
Objective 3.1: Create and Configure virtual machine settings, p.144 Training Guide: Installing and
Configuring Windows Server 2012 R2: Chapter 7: Hyper-V Virtualization, Lesson 2: Deploying and configuring virtual machines, p.335
QUESTION NO: 3
You have a Hyper-V host named Server1 that runs Windows Server 2012 R2.
Server1 hosts several virtual machines. Each virtual machine has two network adapters. Server1 contains several virtual switches.
On Server1, you create a NIC team that has two network adapters.
You discover that the NIC team is set to Static Teaming mode.
You need to modify the NIC teaming mode to Switch Independent.
Which cmdlet should you use?
A. Set-VMNetworkAdapter
B. Set-NetLbfoTeam
C. Set-NetLbfoTeamNic
D. Set-VMSwitch
Answer: B
Explanation
The Set-NetLbfoTeam cmdlet sets the TeamingMode or LoadBalancingAlgorithm parameters on the specified NIC team.
Example: Set the teaming mode
This command sets the teaming mode of the team named Team1 to LACP.
Windows PowerShell
PS C:\> Set-NetLbfoTeam -Name Team1 -TeamingMode LACP
Reference: Set-NetLbfoTeam
https://technet.microsoft.com/en-us/library/jj130844(v=wps.630).aspx
QUESTION NO: 4
You work as an administrator at Contoso.com. The Contoso.com network consists of a single domain named Contoso.com.
Contoso.com has a Windows Server 2012 R2 domain controller, named ENSUREPASS-DC01, which has the Domain Naming master and the Schema master roles installed. Contoso.com also has a
Windows Server 2008 R2 domain controller, named ENSUREPASS-DC02, which has the PDC Emulator,
RID master, and Infrastructure master roles installed.
You have deployed a new Windows Server 2012 server, which belongs to a workgroup, in
Contoso.com's perimeter network.
You then executed the djoin.exe command.
Which of the following is the purpose of the djoin.exe command?
A. It sets up a computer account in a domain and requests an offline domain join when a computer restarts.
B. It sets up a user account in a domain and requests an online domain join when a computer restarts.
C. It sets up a computer account in a domain and requests an offline domain join immediately.
D. It sets up a computer account in a domain and requests an online domain join immediately.
Answer: A
QUESTION NO: 5
Your network contains one Active Directory domain named contoso.com. The domain contains
10 domain controllers and a read-only domain controller (RODC) named RODC01.
You plan to replace a domain controller named DC1. DC1 has the schema operations master role.
You need to transfer the schema master role to another domain controller named DC10 before you remove Active Directory from DC1.
Which tool should you use?
A. the ntdsutil command
B. the Set-ADDomain cmdlet
C. the Install-ADDSDomain cmdlet
D. the dsadd command
E. the dsamain command
F. the dsmgmt command
G. the net user command
H. the Set-ADForest cmdlet
Answer: A
Explanation
To transfer the schema master role using the command line:
* Open Command Prompt.
* Type:
ntdsutil
* At the ntdsutil command prompt, type:
roles
* At the fsmo maintenance command prompt, type:
connection
* At the server connections command prompt, type:
connect to serverDomainController
* At the server connections command prompt, type:
quit
* At the fsmo maintenance command prompt, type:
transfer schema master
Reference: Transfer the schema master role
All experts and professors of our company have been trying their best to persist in innovate and developing the IBM S2000-020 test training materials all the time in order to provide the best products for all people and keep competitive in the global market. We believe that you will pass your exam and get the related certification with Splunk SPLK-3003 study dump. Google Professional-Cloud-Architect - Life is full of ups and downs. It is believed that no one is willing to buy defective products, so, the Salesforce Advanced-Administrator study guide has established a strict quality control system. Our payment system will automatically delete your payment information once you finish paying money for our SAP C_S4CPR_2402 exam questions.
Updated: May 28, 2022