Omgzlook is a website to meet the needs of many customers. Some people who used our simulation test software to pass the IT certification exam to become a Omgzlook repeat customers. Omgzlook can provide the leading Microsoft training techniques to help you pass Microsoft certification 70-410 Test Papers exam. Therefore, our affordable 70-410 Test Papers study guide will definitely be gainful opportunity. Come and buy our 70-410 Test Papers exam materials, and you will be grateful for your wise decision. Because the materials they provide are specialized for Microsoft certification 70-410 Test Papers exam, so they didn't attract the examinee's attention.
Windows Server 2012 70-410 It can help you to pass the exam successfully.
Just think of that after you get the 70-410 - Installing and Configuring Windows Server 2012 Test Papers certification, you will have a lot of opportunities of going to biger and better company and getting higher incomes! And allows you to work in the field of information technology with high efficiency. You have seen Omgzlook's Microsoft 70-410 Valid Test Topics exam training materials, it is time to make a choice.
In order to facilitate the user's offline reading, the 70-410 Test Papers study braindumps can better use the time of debris to learn, especially to develop PDF mode for users. In this mode, users can know the 70-410 Test Papers prep guide inside the learning materials to download and print, easy to take notes on the paper, and weak link of their memory, at the same time, every user can be downloaded unlimited number of learning, greatly improve the efficiency of the users with our 70-410 Test Papers exam questions. Or you will forget the so-called good, although all kinds of digital device convenient now we read online, but many of us are used by written way to deepen their memory patterns.
Microsoft 70-410 Test Papers - It is absolutely trustworthy website.
Our windows software and online test engine of the 70-410 Test Papers exam questions are suitable for all age groups. At the same time, our operation system is durable and powerful. So you totally can control the 70-410 Test Papers study materials flexibly. It is enough to wipe out your doubts now. If you still have suspicions, please directly write your questions and contact our online workers. And we will give you the most professions suggestions on our 70-410 Test Papers learning guide.
Many times getting a right method is important and more efficient than spending too much time and money in vain. Our Omgzlook team devote themselves to studying the best methods to help you pass 70-410 Test Papers exam certification.
70-410 PDF DEMO:
QUESTION NO: 1
You have a server named Server1 that runs Windows Server 2012 R2. Server1 has the Hyper-V server role installed. Server1 has 8 GB of RAM.
Server1 hosts five virtual machines that run Windows Server 2012 R2.
The settings of a virtual machine named Server3 are configured as shown in the exhibit. (Click the
Exhibit button.)
You need to ensure that when Server1 restarts, Server3 automatically resumes without intervention.
The solution must prevent data loss.
Which settings should you modify?
A. BIOS
B. Automatic Start Action
C. Automatic Stop Action
D. Integration Services
Answer: C
Explanation
The Automatic Stop Action setting should be modified because it will allow you to configure:
"Save the virtual machine state" option instructs Hyper-V Virtual Machine Management Service to save the virtual machine state on the local disk when the Hyper-V Server shuts down.
OR "Turn Off the virtual machine" is used by the Hyper-V Management Service (VMMS.exe) to gracefully turn off the virtual machine.
OR "Shut down the guest operating system" is successful only if the "Hyper-V Shutdown" guest service is running in the virtual machine. The guest service is required to be running in the virtual machine as the Hyper-V VMMS.EXE process will trigger Windows Exit message which is received by the service. Once the message is received by the guest service, it takes the necessary actions to shut down the virtual machine.
Reference: http://www.altaro.com/hyper-v/hyper-v-automatic-start-and-stop-action/
QUESTION NO: 2
Your network contains a server named Server1 that runs Windows Server 2012 R2. Server1 has the Hyper-V server role installed.
Server1 hosts four virtual machines named VM1, VM2, VM3, and VM4.
Server1 is configured as shown in the following table.
VM2 sends and receives large amounts of data over the network.
You need to ensure that the network traffic of VM2 bypasses the virtual switches of the parent partition.
What should you configure?
A. NUMA topology
B. Resource control
C. resource metering
D. virtual Machine Chimney
E. The VLAN ID
F. Processor Compatibility
G. The startup order
H. Automatic Start Action
I. Integration Services
J. Port mirroring
K. Single-root I/O virtualization
Answer: K
Explanation
Single-root I/O virtualization -capable network adapters can be assigned directly to a virtual machine to maximize network throughput while minimizing network latency and the CPU overhead required for processing network traffic.
References: http://technet.microsoft.com/en-us/library/cc766320(v=ws.10).aspx
http://technet.microsoft.com/en-us/library/hh831410.aspx
Exam Ref 70-410, Installing and Configuring Windows Server 2012 R2, Chapter 3: Configure Hyper-V,
Objective 3.1: Create and Configure virtual machine settings, p.144 Training Guide: Installing and
Configuring Windows Server 2012 R2: Chapter 7: Hyper-V Virtualization, Lesson 2: Deploying and configuring virtual machines, p.335
QUESTION NO: 3
You have a Hyper-V host named Server1 that runs Windows Server 2012 R2.
Server1 hosts several virtual machines. Each virtual machine has two network adapters. Server1 contains several virtual switches.
On Server1, you create a NIC team that has two network adapters.
You discover that the NIC team is set to Static Teaming mode.
You need to modify the NIC teaming mode to Switch Independent.
Which cmdlet should you use?
A. Set-VMNetworkAdapter
B. Set-NetLbfoTeam
C. Set-NetLbfoTeamNic
D. Set-VMSwitch
Answer: B
Explanation
The Set-NetLbfoTeam cmdlet sets the TeamingMode or LoadBalancingAlgorithm parameters on the specified NIC team.
Example: Set the teaming mode
This command sets the teaming mode of the team named Team1 to LACP.
Windows PowerShell
PS C:\> Set-NetLbfoTeam -Name Team1 -TeamingMode LACP
Reference: Set-NetLbfoTeam
https://technet.microsoft.com/en-us/library/jj130844(v=wps.630).aspx
QUESTION NO: 4
You work as an administrator at Contoso.com. The Contoso.com network consists of a single domain named Contoso.com.
Contoso.com has a Windows Server 2012 R2 domain controller, named ENSUREPASS-DC01, which has the Domain Naming master and the Schema master roles installed. Contoso.com also has a
Windows Server 2008 R2 domain controller, named ENSUREPASS-DC02, which has the PDC Emulator,
RID master, and Infrastructure master roles installed.
You have deployed a new Windows Server 2012 server, which belongs to a workgroup, in
Contoso.com's perimeter network.
You then executed the djoin.exe command.
Which of the following is the purpose of the djoin.exe command?
A. It sets up a computer account in a domain and requests an offline domain join when a computer restarts.
B. It sets up a user account in a domain and requests an online domain join when a computer restarts.
C. It sets up a computer account in a domain and requests an offline domain join immediately.
D. It sets up a computer account in a domain and requests an online domain join immediately.
Answer: A
QUESTION NO: 5
Your network contains one Active Directory domain named contoso.com. The domain contains
10 domain controllers and a read-only domain controller (RODC) named RODC01.
You plan to replace a domain controller named DC1. DC1 has the schema operations master role.
You need to transfer the schema master role to another domain controller named DC10 before you remove Active Directory from DC1.
Which tool should you use?
A. the ntdsutil command
B. the Set-ADDomain cmdlet
C. the Install-ADDSDomain cmdlet
D. the dsadd command
E. the dsamain command
F. the dsmgmt command
G. the net user command
H. the Set-ADForest cmdlet
Answer: A
Explanation
To transfer the schema master role using the command line:
* Open Command Prompt.
* Type:
ntdsutil
* At the ntdsutil command prompt, type:
roles
* At the fsmo maintenance command prompt, type:
connection
* At the server connections command prompt, type:
connect to serverDomainController
* At the server connections command prompt, type:
quit
* At the fsmo maintenance command prompt, type:
transfer schema master
Reference: Transfer the schema master role
Secondly, the price of our Lpi 306-300 learning guide is quite favourable than the other websites'. What we have done is to make you more confident in Fortinet NSE7_LED-7.0 exam. HP HPE2-N71 - When choosing a product, you will be entangled. While others are playing games online, you can do online Microsoft MB-260 exam questions. SAP C-S4EWM-2023 - Even if you find that part of it is not for you, you can still choose other types of learning materials in our study materials.
Updated: May 28, 2022