So our customers can pass the exam with ease. There are more opportunities for possessing with a certification, and our 70-410 Questions Sheet study tool is the greatest resource to get a leg up on your competition, and stage yourself for promotion. When it comes to our time-tested 70-410 Questions Sheet latest practice dumps, for one thing, we have a professional team contains a lot of experts who have devoted themselves to the research and development of our 70-410 Questions Sheet exam guide, thus we feel confident enough under the intensely competitive market. Our APP online version of 70-410 Questions Sheet exam questions has the advantage of supporting all electronic equipment. You just need to download the online version of our 70-410 Questions Sheet preparation dumps, and you can use our 70-410 Questions Sheet study quiz by any electronic equipment. Our PDF version can be printed and you can take notes as you like.
Windows Server 2012 70-410 So our product is a good choice for you.
During your practice process, the 70-410 - Installing and Configuring Windows Server 2012 Questions Sheet test questions would be absorbed, which is time-saving and high-efficient. Under the help of our 70-410 Latest Study Notes exam questions, the pass rate among our customers has reached as high as 98% to 100%. We are look forward to become your learning partner in the near future.
As an electronic product, our 70-410 Questions Sheet real study dumps have the distinct advantage of fast delivery. Once our customers pay successfully, we will check about your email address and other information to avoid any error, and send you the 70-410 Questions Sheet prep guide in 5-10 minutes, so you can get our 70-410 Questions Sheet exam questions at first time. And then you can start your study after downloading the 70-410 Questions Sheet exam questions in the email attachments.
Microsoft 70-410 Questions Sheet - Knowledge is wealth.
Our PDF version of 70-410 Questions Sheet training materials is legible to read and remember, and support printing request. Software version of 70-410 Questions Sheet practice materials supports simulation test system, and give times of setup has no restriction. Remember this version support Windows system users only. App online version of 70-410 Questions Sheet exam questions is suitable to all kinds of equipment or digital devices and supportive to offline exercise on the condition that you practice it without mobile data.
Whenever it is possible, you can begin your study as long as there has a computer. In addition, all installed 70-410 Questions Sheet study tool can be used normally.
70-410 PDF DEMO:
QUESTION NO: 1
Your network contains an Active Directory domain named contoso.com. The domain contains a server named Server1. Server1 runs Windows Server 2012 R2.
You need to create a 3-TB virtual hard disk (VHD) on Server1.
Which tool should you use?
A. Computer Management
B. Server Manager
C. Share and Storage Management
D. New-VirtualDisk
Answer: A
Explanation
For other questions to create a VHD (file) you can use computer management.
- Share and storage management (2008 only)
- New-storagesubsystemVirtualDisk (this is a virtual disk, NOT a virtual hard disk)
- Server Manager (you would use this to create virtual disks, not virtual hard disks)
QUESTION NO: 2
In an isolated test environment, you deploy a server named Server1 that runs a Server Core
Installation of Windows Server 2012 R2. The test environment does not have Active Directory
Domain Services (AD DS) installed.
You install the Active Directory Domain Services server role on Server1.
You need to configure Server1 as a domain controller.
Which cmdlet should you run?
A. Install-ADDSDomainController
B. Install-ADDSDomain
C. Install-ADDSForest
D. Install-WindowsFeature
Answer: C
Explanation
Install-ADDSDomainController - Installs a domain controller in Active Directory.
Install-ADDSDomain - Installs a new Active Directory domain configuration.
Install-ADDSForest - Installs a new Active Directory forest configuration.
Install-WindowsFeature - Installs one or more Windows Server roles, role services, or features on either the local or a specified remote server that is running Windows Server 2012 R2. This cmdlet is equivalent to and replaces Add-WindowsFeature, the cmdlet that was used to install roles, role services, and features.
C:\PS>Install-ADDSForest -DomainName corp.contoso.com -CreateDNSDelegation DomainMode
Win2008 - ForestMode Win 2008 R2 -DatabasePath "d:\NTDS" -SysvolPath "d:\SYSVOL" -LogPath
"e:\Logs"Installs a new forest named corp.contoso.com, creates a DNS delegation in the contoso.com domain, sets domain functional level to Windows Server 2008 R2 and sets forest functional level to
Windows Server 2008,installs the Active Directory database and SYSVOL on the D:\ drive, installs the log files on the E:\ drive and has the server automatically restart after AD DS installation is complete and prompts the user to provide and confirm the Directory Services Restore Mode (DSRM) password.
QUESTION NO: 3
Your network contains an Active Directory domain named contoso.com. The domain contains
500 servers that run Windows Server 2012 R2.
You have a written security policy that states the following:
* Only required ports must be open on the servers.
* All of the servers must have Windows Firewall enabled.
* Client computers used by administrators must be allowed to access all of the ports on all of the servers.
* Client computers used by the administrators must be authenticated before the client computers can access the servers.
You have a client computer named Computer1 that runs Windows 8.
You need to ensure that you can use Computer1 to access all of the ports on all of the servers successfully. The solution must adhere to the security policy.
Which three actions should you perform? (Each correct answer presents part of the solution. Choose three.)
A. On Computer1, create a connection security rule.
B. On all of the servers, create an outbound rule and select the Allow the connection if it is secure option.
C. On all of the servers, create an inbound rule and select the Allow the connection if it is secure option.
D. On Computer1, create an inbound rule and select the Allow the connection if it is secure option.
E. On Computer1, create an outbound rule and select the Allow the connection if it is secure option.
F. On all of the servers, create a connection security rule.
Answer: A C F
Explanation
Unlike firewall rules, which operate unilaterally, connection security rules require that both communicating computers have a policy with connection security rules or another compatible IPsec policy.
Traffic that matches a firewall rule that uses the Allow connection if it is secure setting bypasses
Windows Firewall. The rule can filter the traffic by IP address, port, or protocol. This method is supported on Windows Vista or Windows Server 2008.
References:
http://technet.microsoft.com/en-us/library/cc772017.aspx
http://technet.microsoft.com/en-us/library/cc753463.aspx
QUESTION NO: 4
Your network contains one Active Directory forest named contoso.com. The forest contains a single domain.
AH domain controllers run Windows Server 2012 R2.
The domain contains an organizational unit (OU) named TemporaryUsers that only contains 50 users accounts for temporary employees. The users are members of a global group named TempUsers.
The TemporaryUsers OU is configured as shown in the exhibit. (Click the Exhibit button.)
You need to delete all of the user accounts of the temporary employees
What Windows PowerShell command should you run? to answer, select the appropriate options in the answer area.
Answer:
Explanation
Remove-AdGroup -identity 'OU=temporaryUsers,dc=contoso.dc"com"-recursive
QUESTION NO: 5
You have three servers named Server1, Server2, and DC1 that run Windows Server 2012 R2.
IPv6 addresses and configurations are assigned to all of the servers by using DHCPv6.
The IPv6 routing on Server1 is shown in the following table.
You verify that Server2 can ping the IPv6 address of DC1.
You need to ensure that Server1 can ping the IPv6 address of DC1.
What command should you run on Server1? (To answer, select the appropriate options in the answer area.)
Answer:
Explanation
Before a routing table is used, the destination cache is checked for an entry matching the destination address in the packet being forwarded. If the destination cache does not contain an entry for the destination address, the routing table is used to determine:
The next-hop address - For a direct delivery (in which the destination is on a local link), the next-hop address is the destination address in the packet. For an indirect delivery (in which the destination is not on a local link), the next-hop address is the address of a router.
The next-hop interface - The interface identifies the physical or logical interface that is used to forward the packet either to its destination or to the next router.
Reference: http://technet.microsoft.com/en-us/library/dd379520%28v=WS.10%29.aspx
Get the test Cisco 300-740 certification is not achieved overnight, we need to invest a lot of time and energy to review, and the review process is less a week or two, more than a month or two, or even half a year, so Cisco 300-740 exam questions are one of the biggest advantage is that it is the most effective tools for saving time for users. Please believe that IBM C1000-137 learning materials will be your strongest backing from the time you buy our IBM C1000-137 practice braindumps to the day you pass the exam. ServiceNow CIS-SP - Our test prep can help you to conquer all difficulties you may encounter. With the help of our BCS TTA-19 exam questions, your review process will no longer be full of pressure and anxiety. When you send us a message, we will reply immediately and we will never waste your precious time on studying our VMware 6V0-32.24 practice quiz.
Updated: May 28, 2022